You've got 1000 subs now. Was 999 before I found the channel Going to get tough this winter Don't know if I can find a factory studded tire for my 29" beach cruiser
if ur making ur own i find make sure u make a good barrier. get some thick glue and past it into the wheel like bondo. just seal it all up and keeps the screws in far better than a purchased setup.
Have you riden the studs on wet mud? I have a set of Tannus tyres which I am happy with on roads but don't have enough grip for muddy off road conditions. I was considering putting some studs in them for the winter.
Ok, let me get this. You are screwing 100 pointy metal screws into the tire. Then you will ride the tire over very harsh terrain...? Duh, are you looking to try to patch the tube 100 times when you get flats?
Great question Yes, these are the 4x9's. I would not be go any longer than that or you'll start to get punctures. Oh! And really wrap your tube up in old tubes and/or Mr. Tuffy liners 👊🏼
Do you leave the studs on year-round? I’m asking mostly for my rear tire, as it is much more difficult to remove because of the hub motor. I’m thinking of maybe placing some studs along the exterior as you show, I’m just leaving them on throughout the year.
It will just dull out your studs and you'll wind up having to replace them before the next winter, hence not saving any time at the end. Specially with the rear since it's the driving wheel and all the quick summer accelerations will shave off studs quickly.
thanks for the info, this is really insightful. I've always wondered about studding your own tires
Thank you so much !
Thank you so much for these videos man, and for keeping me alive this winter in Montreal!
are you riding a fatbike? 26X4 tires?
Where is the pictures he said? They are never shown
Thank you ! best video on studs
You've got 1000 subs now. Was 999 before I found the channel
Going to get tough this winter
Don't know if I can find a factory studded tire for my 29" beach cruiser
Thank you so much for your clear explanation!
Thanks for the video! Very helpful! I would be nice to have a link to were you buy the studs for the tires!
Some studs that work pretty well...
www.amazon.ca/gp/aw/d/B078JJ6J4S?psc=1&ref=ppx_pop_mob_b_asin_title
if ur making ur own i find make sure u make a good barrier. get some thick glue and past it into the wheel like bondo. just seal it all up and keeps the screws in far better than a purchased setup.
Put glue on the stud?
Good to know. Thanks man
very nice explaining
Very usefull thanks bro.
I have a Vee Snowshoe 26x 4.5 with Silica as a front tire. The tires have around 1000 km on them. Could I stud this tire as you demonstrated?
Have you riden the studs on wet mud? I have a set of Tannus tyres which I am happy with on roads but don't have enough grip for muddy off road conditions. I was considering putting some studs in them for the winter.
Ok, let me get this. You are screwing 100 pointy metal screws into the tire. Then you will ride the tire over very harsh terrain...? Duh, are you looking to try to patch the tube 100 times when you get flats?
You mentioned a link to the studs..as the two before me mentioned. PLEASE ??
Some studs that work pretty well...
www.amazon.ca/gp/aw/d/B078JJ6J4S?psc=1&ref=ppx_pop_mob_b_asin_title
@@urbancargobikes4930 Thank You !!
Is it the 4mm x 9mm? Or can we go bigger for a super73?
Great question
Yes, these are the 4x9's. I would not be go any longer than that or you'll start to get punctures. Oh! And really wrap your tube up in old tubes and/or Mr. Tuffy liners 👊🏼
Is this any better of worse, vs tires chich have predrilled stud holes, and you just insert the studs.
🔥🔥🔥
Second that. Where can I buy these studs? Thanks
Some studs that work pretty well...
www.amazon.ca/gp/aw/d/B078JJ6J4S?psc=1&ref=ppx_pop_mob_b_asin_title
What do you think of some shinko 244s or 241s with the studds in them for snow riding ?
You can put the shinkos on the super73 so was wondering if they would be good to get studded since they are motorcycle tires
Do you leave the studs on year-round? I’m asking mostly for my rear tire, as it is much more difficult to remove because of the hub motor. I’m thinking of maybe placing some studs along the exterior as you show, I’m just leaving them on throughout the year.
It will just dull out your studs and you'll wind up having to replace them before the next winter, hence not saving any time at the end. Specially with the rear since it's the driving wheel and all the quick summer accelerations will shave off studs quickly.
9:57