Dodge Ram Dashboard Removal and Replacement - 2nd Gen 94-97
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2025
- Removing and replacing the cracked dashboard in my 2nd Gen Dodge Ram 2500 V10. If you're doing this project, you will find this video helpful.
#dodgeram #MagnumV10 #v10
***Links to products I use, or are seen in the video***
Cloth Tape: amzn.to/4ahmkhe
■ Buy Merch → project-time-g...
■ Follow us on Instagram → / projecttimegarage
■ Like us on Facebook→ / projecttimegarage
■ E-MAIL US: projecttimegarage@outlook.com
■ ↓ Send us stuff ↓
Project Time Garage
1113 Murfreesboro Rd
Suite 106
Mailbox #109
Franklin TN 37064
Here are some other channels I recommend
■ Uncle Mark's Channel: / unclemarksdiyautomotiv...
■ The Mopar Garage: / worcsracing553
■ Good Enuff Customs: / @goodenuffcustoms
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting this channel so I can continue to provide you with free content each week!
Wow, Brian, you’re not scared to do a project! The whole dash out! Big job! Smart fixing any issues you find as you tear it down. This has to be the best step by step tutorial anywhere on the net! Couple hours r&r is amazing. I would have thought it would have taken longer. Great job!
One of these days I'm going to just drop my truck off at your house with a detailed list of everything I need done(in the middle of the night, that is..)😂 ya gotta promise not to keep it tho. 🤣🤣 Nice work Brian, looks good! 👍👍
A 2nd gen right of passage! Nice job man, this is not a small task. It’s always terrifying because it’s so easy to break the rest of the structure that it mounts to.
What a great tutorial on the dash removal and wire connector and accessory disconnects. You mentioned a broken plastic piece in your dash around the cupholder. I've repaired broken plastic pieces numerous times with a soldering iron flap tip, might be an option. Gorilla Glue or Loctite60 Sec. Universal glue have also done wonders for me. Great job on this upgrade!
Looks great again hey I like the torch trick nice truck thanks for the video
Lmc dash is great. I have had it in for 3 ish years and zero issues no fadeing. I might add i did also replace my inner dash as it was gone also, i found the plastic on ebay not cheap! Then you re rivet the plastic to the frame. Man that was a job 😂
Make sure to wash and disinfect your hands and tools after touching that Dodge, i don't want your Fords catching second hand wiring and transmission problems.
I made sure to wear rubber gloves and a mask. I learned from Zip Ties 'N Bias Plus about second hand Dodge diseases.
@ProjectTimeGarage mint 👌