Nixo007 Metal wheels are for the beter grip on the slopes, hills. I think that cleaning wouldnt be a problem because i have a big holes. th-cam.com/video/4ZUnCBDucrs/w-d-xo.html
All five models made so far weighed between 80-100 kg. I also had problems with turning at the beginning, but I eliminated this with chain tensioners and by shortening the wheelbase. The closer the wheels are, the easier it turns and the less energy it consumes.
I enjoyed the video. I want to make it too, but I'm worried about the battery. To do a 25V 250W motor, use the CYTRON MDDS30 motor drive. Please give me some advice.
Yeah, I think it'll work. Probably my next motordriver will be a cytron, it's cheaper than a sabertooth. thanks for the suggestion.😀 However, if you are already doing 4 wheel drive, I suggest you make something similar to my video model 6.10. You don’t need a chain, sprockets, tensioners and a lot of work, and the product is even less complex, the grass doesn’t wind around the chain and sprockets. 😀
Že dlje časa se ukvarjam z inovativnimi rešitvami na tem področju, pa sem presenečen , da v evropi ne najdemo rešitve , ki bi ustrezale mojim kriterijem. Indonezijci pa rasturajo, kot da so tehnološko najbolj razviti. pozdrav Danilo
Super maszyna ✌️👷♂️Jak się sprawuje po 2 latach?
Thanks for sharing this. Very well done!
Interesting project. What for the metal wheels are?? Cleaning them after use can be a big challenge!!
Nixo007 Metal wheels are for the beter grip on the slopes, hills. I think that cleaning wouldnt be a problem because i have a big holes.
th-cam.com/video/4ZUnCBDucrs/w-d-xo.html
Wow!
So how much does the entire thing weigh? We've built a robot similar to it but it really struggles to turn on the spot like yours!
All five models made so far weighed between 80-100 kg. I also had problems with turning at the beginning, but I eliminated this with chain tensioners and by shortening the wheelbase. The closer the wheels are, the easier it turns and the less energy it consumes.
I enjoyed the video. I want to make it too, but I'm worried about the battery. To do a 25V 250W motor, use the CYTRON MDDS30 motor drive. Please give me some advice.
Yeah, I think it'll work. Probably my next motordriver will be a cytron, it's cheaper than a sabertooth. thanks for the suggestion.😀 However, if you are already doing 4 wheel drive, I suggest you make something similar to my video model 6.10. You don’t need a chain, sprockets, tensioners and a lot of work, and the product is even less complex, the grass doesn’t wind around the chain and sprockets. 😀
@@urbanbelaj thank you
Looks awesome, but I reckon you need fixed chain tensioners, or much stronger springs in thr ones you have. Those chains look awful floppy.
Yes, me either, i didnt like the chain, so i make new model 6, th-cam.com/video/Mi-kUpBxTE0/w-d-xo.html
타이어 머쓰나요?😊
Yes 8 inch
Hello, do you have any technical drawings for this mower? (Fusion 360 etc.)
No, unfortunately I don’t have a plan, I measured and cut everything on a regular basis if you mean the frame.
what engine do you use?
Briggs 775 is
Že dlje časa se ukvarjam z inovativnimi rešitvami na tem področju, pa sem presenečen , da v evropi ne najdemo rešitve , ki bi ustrezale mojim kriterijem. Indonezijci pa rasturajo, kot da so tehnološko najbolj razviti.
pozdrav
Danilo
Pri čem pa imate težave?
Where did u buy the tyre?
Local agro shop, this are cultivator tyres 4/8 inch.
Hi
I'm interested build my own this type machine can you please tell details about electrics ? Control . please
Hi, i use flysky i6 with reciver, Sabertooth 2x32 motor driver.
Are there plans available for this?
No, the plans doesnt exist😀
Bạn dùng moto bao nhiêu wat và tải nặng bao nhiêu kg?
250w each motor, the whole mower weight about 100 kg.
can send me mode detail of transmission sistem?
You mean gear ratio, here is around 11-36 teeth, i dont remember very well. Here i have around 70 rpm on axis on wheels.😀
Všeč mi je tale koncept z dvema motorjema.
Hvala.😀