Simple to follow video but how do you get the departments not accessing default VLAN1 gateway interface? With the above setup, can the default VLAN1 (admin) access the the other tagged VLANS but not the reverse? Thank you.
Hi, We have 3 houses on the property, and I first installed 1 "EAP610 outdoor" connected via cable to the ISP router (House 1). Got great wifi speed OUTSIDE all 3 houses, but inside in house 2 and 3 the signal drops by 90+ %. Bought a second "EAP610 outdoor" (as adviced by dealer). I hope to put the second EAP610 on house 2 (wireless)-is this possible and if so how? Got no support via TP-link support chatbot.
how to do private vlans and port isolations? i also tried researching like what if there are 3 vlan networks, one network for server computer and 2 other network for different departments? department 1 & 2 can communicate with server network but they can't communicate with each other
I would have though that if you create a port that has the same details as the "lan" or "all" and connect your printer to that port, all devices will see it. Just like how they can connect to the internet they will connect to the printer. I dont have any education on this so I could be wrong but it seems logical
i didn't get the part of wan configuration, as router already have the ppp settings ? do i have to switch the router to a bridge mode and the controller will dial the ppp session ?
how to do private vlans and port isolations? i also tried researching like what if there are 3 vlan networks, one network for server computer and 2 other network for different departments? department 1 & 2 can communicate with server network but they can't communicate with each other
I have a main router TPLink Archer AX50 but seens that this model doesn't work with omada controller. I really need to change my router to operate as a gateway ?
I have just placed my order for an OC200. I have SG3428X, and I found out that the OC200 is using POE, so my question is that, can I connect the OC200 to the SG3428X? Or do I need to do or buy something for the POE?
saludos... este controlador no tiene la funcion de restringir a los clientes, a compartir la señal wifi a traves de blouetooth, ó a traves del hotspot que viene incorporado en los dispositivos???? Greetings ... this controller does not have the function of restricting clients, to share the wifi signal through blouetooth, or through the hotspot that is incorporated in the devices ????
My config: Internet modem form provider, Switch TL-SG3428, 2 EAP653 and 4 PC. I need to block internet on 2 PC ? How to do that ? All PC`s have are linked and must see each other.
Hello Sir, I am facing problem to open Omada controller software. When I open Omada controller it launches web browser and downloads .jar file every time. I reinstall the software but the problem is still not resolved. so can you help me what should i do?
I wondering how to block access Router, Switch and EAP from browser, typing IP address. I Already blocked ping from all LANs, but home webpage is acessible.
Yo hice una VLAN para Voip, pero cuando internet se cae, la red local de mi VLAN tambien se cae alguien sabe a que se debe? I Did a Vlan for Voip, but when Internet Fails, the local network it not working , I can't see my local devices, any advice?
I hear your frustrations, but.....This is why a network professional is called an Engineer. It's not simple and takes training and patience to unlink your head from physical attributes and really grasp the various technolgies, naming and purposes for each of them under the hood. Easy is dangerous, and hackers will be all up in your business if you leave places for them to enter.
Just use the combined router/switch/access point your isp spent. But if you want a proper complex network for a business hospital school or anything else, get a proper engineer who understands these things. Maybe this ain’t for you
Hi, Tp-Link user here (OC200, TL-R605 & TL-SG3428) using for my network. Thank you so much for this helpful video ❤️
People should know that TP-Link will not ship out a replacement device under warranty unless you pay to ship the defective device to them first.
i hope in short order you provide nearly the same amount of options as unifi.
Simple to follow video but how do you get the departments not accessing default VLAN1 gateway interface? With the above setup, can the default VLAN1 (admin) access the the other tagged VLANS but not the reverse? Thank you.
Very Very Usefull! Thanks a lot
Hi, We have 3 houses on the property, and I first installed 1 "EAP610 outdoor" connected via cable to the ISP router (House 1). Got great wifi speed OUTSIDE all 3 houses, but inside in house 2 and 3 the signal drops by 90+ %. Bought a second "EAP610 outdoor" (as adviced by dealer). I hope to put the second EAP610 on house 2 (wireless)-is this possible and if so how? Got no support via TP-link support chatbot.
with this VPN Router can I distribute DHCP Server over the VLANS? Example, for 6 VLANs, 6 different DHCP Servers, one for each VLAN.
how to do private vlans and port isolations? i also tried researching like what if there are 3 vlan networks, one network for server computer and 2 other network for different departments? department 1 & 2 can communicate with server network but they can't communicate with each other
Hi there, how can I set up an acl rule to allow all users on different vlans to access my printer? Thanks
I would have though that if you create a port that has the same details as the "lan" or "all" and connect your printer to that port, all devices will see it. Just like how they can connect to the internet they will connect to the printer. I dont have any education on this so I could be wrong but it seems logical
i didn't get the part of wan configuration, as router already have the ppp settings ?
do i have to switch the router to a bridge mode and the controller will dial the ppp session ?
I thought VLANs were for me, but I think what I need instead is port isolation to prevent smart devices from snooping on other devices.
how to do private vlans and port isolations? i also tried researching like what if there are 3 vlan networks, one network for server computer and 2 other network for different departments? department 1 & 2 can communicate with server network but they can't communicate with each other
I have a main router TPLink Archer AX50 but seens that this model doesn't work with omada controller. I really need to change my router to operate as a gateway ?
Very useful video. Thanks!
I have just placed my order for an OC200. I have SG3428X, and I found out that the OC200 is using POE, so my question is that, can I connect the OC200 to the SG3428X? Or do I need to do or buy something for the POE?
You can power up using micro usb 5v.
Can you help me on how to monitor TP-Link TL-WA860RE and TL-WA855RE model devices?
Is there any software to design our network diagram with tplink products as the video does? thank you
Very useful video
saludos... este controlador no tiene la funcion de restringir a los clientes, a compartir la señal wifi a traves de blouetooth, ó a traves del hotspot que viene incorporado en los dispositivos????
Greetings ... this controller does not have the function of restricting clients, to share the wifi signal through blouetooth, or through the hotspot that is incorporated in the devices ????
Durante L installazione del software controller ho notato che sono presenti le librerie log4j quanto possiamo stare tranquilli su questo?
Hi I use tp link wr845 . I have an excuse sometime it suddenly of .why it happen
My config:
Internet modem form provider, Switch TL-SG3428, 2 EAP653 and 4 PC.
I need to block internet on 2 PC ? How to do that ?
All PC`s have are linked and must see each other.
hello brother show how to reset Tplink EAP653 ?
Hello Sir, I am facing problem to open Omada controller software. When I open Omada controller it launches web browser and downloads .jar file every time. I reinstall the software but the problem is still not resolved. so can you help me what should i do?
Same issue I'm also facing.
I wondering how to block access Router, Switch and EAP from browser, typing IP address. I Already blocked ping from all LANs, but home webpage is acessible.
Is there any payment to use omada server???
Yo hice una VLAN para Voip, pero cuando internet se cae, la red local de mi VLAN tambien se cae alguien sabe a que se debe? I Did a Vlan for Voip, but when Internet Fails, the local network it not working , I can't see my local devices, any advice?
❤❤❤
How to make interface without acess to internet ?
Sorry to say, Can you it in Bengali clearly? I am little bit education. level issue.
CAn anyone please confirm if the TL-SG2452PS V3.0 is supported by Omada controller?
It is not.
My God, networking is so confusing. Why has no one made these products super easy for normal people
I hear your frustrations, but.....This is why a network professional is called an Engineer. It's not simple and takes training and patience to unlink your head from physical attributes and really grasp the various technolgies, naming and purposes for each of them under the hood. Easy is dangerous, and hackers will be all up in your business if you leave places for them to enter.
Just use the combined router/switch/access point your isp spent. But if you want a proper complex network for a business hospital school or anything else, get a proper engineer who understands these things. Maybe this ain’t for you