Sweet! The once-ubiquitous sound coming from at least half of remote off-grid dairy rooms as it powered the milking machine, then the cooler to keep the milk cold over night. Col, NZ.
Runs Nice Mate. I got that 3hp apart yesterday and cleaned all the Sump out wont take much too get it going The Lister Cs are a brilliant Engine its good that people like us restore and Preserve rather than Scrap
These engines are mechanical art. Not like the massed produced junk today. All people care about anymore with engines is "How much horsepower does it have"? People don't appreciate a simple, low stress design like this anymore built to run for a century.
@@bittusharma6852 why not have a belt on the flywheel to a smaller wheel so you can increase the rpm on the side of the alternator ? it says 650 rpm. so a wheel that is 1/4 of the size would make the alternator do 2500 rpm, which is enough for the alternator to work better.
You did a great job! Engine clean and working! I have a Cs lister I am finishing to replenish. I noticed that the oil pump is not going: pressing on with screwdrivers goes but turning the flywheels. No. Is it the spring to change what you say?
It could be spring, or it could be the tappet end is worn or the cam end that drives it is worn. Does the rod that drives the pump move up and down freely?
![[ไฮไลต์] แบดมินตันชาย SHI Yu Qi (จีน) vs วิว กุลวุฒิ (ไทย) รอบ 8 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/f7z7taforOM/mqdefault.jpg)
Beautiful lister my father had one almost 60 years ago never let him down. Bringing tears to my eyes
I grew up with one in the late 70's , used it to pump water for the animals and the house. Miss those times !!
Sweet! The once-ubiquitous sound coming from at least half of remote off-grid dairy rooms as it powered the milking machine, then the cooler to keep the milk cold over night. Col, NZ.
Excellent. What a lovely engine.Looks great and sounds great.
Orgasmic..... I've got two of these, fantastic engines.
Beautiful, not repainted, fabulous!
That's outstanding, good job!
Thank you, I really enjoyed that stroking sound ...
Runs Nice Mate. I got that 3hp apart yesterday and cleaned all the Sump out wont take much too get it going The Lister Cs are a brilliant Engine its good that people like us restore and Preserve rather than Scrap
great bit of kit , I have one also , just love em
Excellent starting,timing
Very nice governer seting
and taped
Great video 👍🏻
Damn that is cool!
nice sound
So neat, the original Lister. I love this version.
"He" (I call this engine he :D) works perfectly with alternators and in pumping water.
Uau. Belíssimo motor Lister. Sensacional. 👏👏👏👏
It's a beauty I want to buy it 😎👍
Good working sir
New engine vdo
Made in Heaven.
que hermoso, está recien bañado !!
I just acquired one which looks identical but is rated 3hp @600 rpm. Looks identical though.
how long will they run without cooling
these old engines are so quiet compared to the noisy engines of these modern days! would work great with a generator!!
These engines are mechanical art. Not like the massed produced junk today.
All people care about anymore with engines is "How much horsepower does it have"? People don't appreciate a simple, low stress design like this anymore built to run for a century.
i already have a alternator connected with this same model...bt voltage is not accurate due to low rpm
@@bittusharma6852 why not have a belt on the flywheel to a smaller wheel so you can increase the rpm on the side of the alternator ?
it says 650 rpm. so a wheel that is 1/4 of the size would make the alternator do 2500 rpm, which is enough for the alternator to work better.
PARABÉNS ! Muito conservado o motor,
is that Gopnik mix 2020? Great hardbass
Feul conjuption ?
in / hrs. With 3 KVA load
Please reply me.
Is this engine for sale? or where can i get one to buy? thanks!
Good sounds bullet wali feeling well done bro. Speed adzester de down ch Jo parts Kam krda aa os da ki Kam hunda AA dasso plz reply
I have one How do you Date theses wonderful engines i need help with my Start o Matic bob
Welches Baujahr ?
Manufactur Date?
The sound of my youth…
You did a great job! Engine clean and working! I have a Cs lister I am finishing to replenish. I noticed that the oil pump is not going: pressing on with screwdrivers goes but turning the flywheels. No. Is it the spring to change what you say?
It could be spring, or it could be the tappet end is worn or the cam end that drives it is worn. Does the rod that drives the pump move up and down freely?
Thanks for the advice! I solved changing the spring with a longer one! Now the oil pump works !!
how much HP does it have
Molto Bella
I need this bro
O my God it beautiful
I would love to buy it off you
Hi. Can anyone help me? How much this engine worth +/- ? Thank you
Hermoso
vintage.....hehehehe.....i have 7 engines likes this one all are i think 40years old.my father bought these 2nd hand engines 40 years ago
Are they in working condition and for sale?
How much
This motor work at 850 rpm ....this more speed ....look spring more tension
Running without water? 🫣
Дизель Апокалипсиса
น้ำมัน 1 ลิตร เกือบ 4 ชั่วโมง
yeh engine bechoge
Sar selig