Cheers for the vid on clip locations and the numbering on the pins, as well as actually doing the driver side. Most people leave out the driver as it can be a pain.
You failed to mention the "O" ring/gasket that MAY fall out w/o you knowing when you take that cap off. Mine did, & fortunately I saw it/felt it falling out, & had I not noticed, the cap may not fit tightly & would be subject to moisture/water & possibly just fall off w/o it being able to lock back on. I can't get MY bulb OUT!!! I see ONE clip, but not two. You _s k a t e d_ past that w/o detailing how those clips even work. If I try too hard or try to "pop" the clips off in the *WRONG* direction, I will screw it up BIG time. Ha...I may run back down to the Advance Auto where I bought it. I know they install wiper blades & batteries in MOST vehicles...maybe I can s/one to help me out down there.
Can’t seem to take the clip of either. I got a 2006 c200 mercedes and trying to replace the driver side headlight, i can take the black cap off and the wire connected to the bulb, but the a actually bulb is not coming out. Any ideas?
I got mercedes c200 advant 2006, i i can take out the black cap, an the wire the bulb is connected to, but can not seem to actually take out the bulb it self, as the clip that is holding thr bulb is not moving, any ideas?
hello i bought led lights but when i installed them they blink, then they told me i needed a decoder then i did the test with both and it still blinks, can you help me solve the problem?
Fuck this! If you’re a guy with big hands, save yourself the frustration and take it to the dealer. Don’t matter if they’re charging you $500 to change one bulb, pay it! You’ll thank me later!
Thank you very much! I’m sitting in my car with the driver side low beam headlight warning. I appreciate you taking the time to help educate me.
Cheers for the vid on clip locations and the numbering on the pins, as well as actually doing the driver side. Most people leave out the driver as it can be a pain.
With those "PINS"...I think the bulb only fits in one way, & that alleviates screwing it up.
thank you but the hardest part u avoided the disengaging of the clips
How I never realized how pretty this car can be. My uncle has one that is soo neglected it’s looks ghetto. Good job!
Thank you so much for your video
I will not keep waiting on my husband to change out the dead headlights🙄.
I can do this🦾
I have different lights in my 08 that’s strange
What watts are these ? Cus I put cheap ones in and they blew out
Those bulbs look super nice on the C300. Can you post the details brand and such?
I have C300 and my lights look a little yellow
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F262091297882
Dawg the main part I need, how to take off the bulb from that metal box thing you skipped
Likewise He didn't detail how to release those CLIPS or w/ever it is holding the bulb in.
Thank you!
You failed to mention the "O" ring/gasket that MAY fall out w/o you knowing when you take that cap off. Mine did, & fortunately I saw it/felt it falling out, & had I not noticed, the cap may not fit tightly & would be subject to moisture/water & possibly just fall off w/o it being able to lock back on.
I can't get MY bulb OUT!!! I see ONE clip, but not two. You _s k a t e d_ past that w/o detailing how those clips even work. If I try too hard or try to "pop" the clips off in the *WRONG* direction, I will screw it up BIG time. Ha...I may run back down to the Advance Auto where I bought it. I know they install wiper blades & batteries in MOST vehicles...maybe I can s/one to help me out down there.
so how did you remove the clips, that is what i was hoping to see.
Down and out. Super easy
Can’t seem to take the clip of either. I got a 2006 c200 mercedes and trying to replace the driver side headlight, i can take the black cap off and the wire connected to the bulb, but the a actually bulb is not coming out. Any ideas?
How do you detach the clips that hold the light in place?
Release them from the hooks and they will slide away. Super easy!
How to get clips off
I have never used a Xenon bulb before. Always had regular H7 low beam bulbs. I have 2008 C300 as well. So these should just fit and work fine?
Are they brighter?
Man bmw audi and caddy you got to have tools that's crazy
you did not show how to remove the clips????
Are these for low beams or high beams?
Low
My c class has standard low beams currently. So can I not replace them with the ebay hid's?
Must be factory Xenon
How do I change my dashboard language back to English. It somehow changed to German and I can’t change it.
Which years had the led strip on top of headlights?
Does anyone one know how to pop off those clips I have the exact same headlight and I cannot remove those clips ???
Push down and pull apart
@@joshthayer8336 ok it was easier then I thought thanks !
I got mercedes c200 advant 2006, i i can take out the black cap, an the wire the bulb is connected to, but can not seem to actually take out the bulb it self, as the clip that is holding thr bulb is not moving, any ideas?
The more difficult part is how to unclip which was not included which makes this whole video useless. Very disappointed.
Thank you bro! Please I need to know low beam light is one or 2 , I seen 2 lights each sides.
Only one low beam
Did they set off any warnings on the dash
Nope, it's just a bulb replacement. Doesn't change anything or set anything off!
How you change the other lights, signal etc?
Mine is completely different. I have a 2008 c300 w204 and I don't have that "box" pn the back of my bulbs. In fact there isn't one period
hello i bought led lights but when i installed them they blink, then they told me i needed a decoder then i did the test with both and it still blinks, can you help me solve the problem?
how u pop the clips
Pull down off the hinges, then out
Any flickering?
Nope!
Bro question is this a good reliable car I’m thinking about purchasing same year same color next week and also can you do a lot of mods
Yes it's a great car. Mine is a manual transmission and is actually for sale right now. The manual trans is very reliable and lots of mods available!
Josh Thayer how much?
Where did you get those wheels? I’ve been looking for them for forever and have not been able to get them.
Any problems with them so far?
Nope! Still working great!
so those you installed are the ice blue headlight do you ha e to by pass anything on the computer to do aftermarket lights
and can you use these for high beam as well?
Nope, it is a simple plug and play with the low beams.
The high beams are slightly different
You need to show someone how to take the clips off
Thanks
Fuck this! If you’re a guy with big hands, save yourself the frustration and take it to the dealer. Don’t matter if they’re charging you $500 to change one bulb, pay it! You’ll thank me later!