"Not a bad way to spend $10,000". (In the voice of Vin Diesel) Wow that is a piece of art and while not $10,000 I'm sure it was was around $2,000. I would have to build a case that was lighted and with mirrors to show off those high end parts. Great build with amazing parts, thanks for the tips along the way. I hope VP makes some parts for the Yeti XL soon, I'd love to build one.
Nice A wench on the front would look coo!? Or maybe a jack or fire extinguisher to go with your cooling system. Love the roof, the graphics are awesome. It just looks like class rig, well done Rich.
+Garszy Yeah, as much as I used to be into the scale accessories, and want to try include them on this build, I'm not sold on many of the items that don't serve a huge purpose. The U4RC rules have certain things that are required like the driver figure, but the rest, I'm not sure about. I have a whole box of scale accessories and may add a couple though
Nice and you beat medic getting finished lol, now all you have to do is a bit of painting on the driver then go out and break it :P Tough looking rig Rich, can't wait for the running video.
+powcar91 Def gonna race it, not sure to what extent......Josh (Harley Designs) is a great driver.....not sure I could match that talent! Maybe put me behind the radio of my RC8B3e vs his MattZilla Ultra4! lol
Lue is good people. I went to his shop a few times. Probably was there a good 3 hours the first time, drank some Bud Light (way before Bud Light went down in flames) and talked about everything. I think he moved to Fresno (from Huntington Beach) and went completely off of social.
+2cwik4u104 No BEC, as the RX8Gen2 has a decent one......We will see if it can handle it though. The Futaba BLS172 cranks out over 500 oz/in of torque!
Hey Rich have you tried the new Turnigy Graphene batteries ? Read a few reviews and they seem to be the next big thing !!! Over 900 cycles with minimal changes to the batterie's IR and they have a high C discharge rate also.
+RC Marty I haven't tried the Graphene batteries yet. I'm about to order a couple, but I don't have huge hopes. I've seen that they have the Pro series and the standard series with a 65c discharge rate as the highest. I've tested 110c discharge batteries....
The RCNetwork The C rating isn't all that impressive, some other manufacturers have comparable ( or at least they say so ) cause nowadays high C rating sells, BUT, in the independant testings I've read, they did perform way better than current lipo batteries...
Shiny. Would you by any chance be doing any other giveaways in the near future. Wink wink nudge nudge and are you going to be running wheel weights in this Spawn Zilla? Thanks.
+Richard Boustred No wheel weights in the SpawnZilla, it's much more of a fast rig than a crawler. and yes......there will be future giveaways.....just not sure when
Looks great Rich! I have some Axial Helmet stickers if you want them. I also have some Axial mounting clamps from a universal light bar kit. They would work great to mount those lexan pieces to the rollcage! Send me a PO box or address and Ill get them to you ASAP. Love your channel!
very asome im very like this built but i have one question you futaba servo is water prov and can you give more information about this servo thank you very much for information
looks like a great build,but your forgetting something. on all my builds I use the lowest gearing, such as 43/13 ring and pinions a big spur gear and a small pinion gear, to get the most torque from my motor.. if I want more wheel speed I go to a higher kv motor.and it always runs cool. but what im getting at is I break a lot of plastic rod ends,or I use to until I started using the rc4wd ss metal rod ends,. now my suspension is bullit proof. just my 2 cents, and I hope it helps someone..
+jb3161 Torque wise, I should be fine with the 2500kv Pro4HD motor from Tekin on 4s.....I agree on the plastic rod ends.....but those RC4WD ends are so expensive! lol Like that should matter at this point!
Fail! You didn't paint the driver helmet!!! Lol, just kidding bud, I know you said you'd get it done. It looks absolutely amazing. Really looking forward to seeing the run vids.
+Theibault Thanks T! Yeah, I've got some details to work out, but wanted to film the way it looks right now.....I'm just really impressed with how well everything came together!
Thanks... One other question I had. How do you like those shocks now that you've had a chance to use them? I am building a truck very similar to the spawnzilla and having a hard time deciding on shocks. Thinking either the prolines or traxxas big bores. Oh... and do you happen to still know the part number of those PL shocks? are they for the slash front or rear?
+Samuel Hwang Everytime you ask, I postpone 1 week.......lol If you find my instagram page, I have started (finally) working on the body. Should have an update soon. Be patient!
+Mit Emluh yeah, no running video on this one yet. I saved it's condition to show off at RCX this year and right after getting back and some projects, they shut down the U4RC track at Irvine Lake. I still need to get the lights worked out and update everyone on the interior. Otherwise it is ready to run....just need time and a track! pS, what was your previous screen name? I recognize the avatar....
+The RCNetwork figured you were juggling a lot of projects, can't wait to see this run, just wanted to rem8nd you lol. my handle hasn't changed just haven't posted any comments in awhile. was waiting to post a comment once I saw this beast run lol
+Mit Emluh yeah, tons of projects right now.....I've got three to build and three more ready to runs to get going! I have a buddy that's gonna wrap up the wiring of the lights. Then hopefully a running video soon....just need to find a place to test it. I don't think regency is good enough for it.
+The RCNetwork well busy is good. btw would love to see your spin on a rc4wd trail finder kit. I know there are a lot of vids on these but I bet you would do something really cool with it.
That's a 3s 1800mah MA pack (under the hood)I have temp powering the lights. Since I'm running 4s Turnigy packs under the driver seat, the 11.1v VP lights won't do good under 14.8v I should have a solution soon to power all under one battery pack.
Fantastic build. Would really love to see it run.
Most excellent build. Have you done a crawling/trailing video of this thing yet? I looked and couldn't find any videos of it in use.
That thing is a beast, the best wraith I have ever seen
+JT Skiver Thanks JTS!
"Not a bad way to spend $10,000". (In the voice of Vin Diesel) Wow that is a piece of art and while not $10,000 I'm sure it was was around $2,000. I would have to build a case that was lighted and with mirrors to show off those high end parts. Great build with amazing parts, thanks for the tips along the way. I hope VP makes some parts for the Yeti XL soon, I'd love to build one.
+travisamc Nice! Yeah, I recognized that line immediately! lol VP has the rear axle out for the XL.....
You sure have a cracking looking rig there Rich. Loved this build series and I look forward to seeing you run it.
+Gary Lowe Thanks Gary! Yeah, I can't wait either!
Nice
A wench on the front would look coo!? Or maybe a jack or fire extinguisher to go with your cooling system.
Love the roof, the graphics are awesome.
It just looks like class rig, well done Rich.
+Garszy Yeah, as much as I used to be into the scale accessories, and want to try include them on this build, I'm not sold on many of the items that don't serve a huge purpose. The U4RC rules have certain things that are required like the driver figure, but the rest, I'm not sure about. I have a whole box of scale accessories and may add a couple though
All of that and no video on it actually running yet, any plans on making one?
Very cool car man! It looks killer for sure! Looking forward to seeing how well it runs offcourse!
+DutchRC Adventures Thanks Dutch! Yeah, it should do pretty well at higher speeds and the small amount of crawling on the U4RC circuit
Short & Sweet it looks Awesome Rich.
Thanks Shayen!
Looks sick man! Great job! Have you thought of putting some sort of rubber boot over your exposed driveshaft? It would look pretty scale.
+JKFlorida Thanks JKF! That might be a good idea...I'll have to check that out
Awesome build! Watched it from the beginning. came out great.
+FILTHY5150RC Thanks Filthy!
Nice and you beat medic getting finished lol, now all you have to do is a bit of painting on the driver then go out and break it :P Tough looking rig Rich, can't wait for the running video.
+Anthony Eaglebarger (toysoldier46552) Thanks AE! Yeah, Medic has a lot going on right now.
Hi Richard just wondering what happened to the running video of Spawnzilla?
This rig looks awsome 👍👍👍👍
+Loureiro Dylan Thanks LD!
It looks amassing!!!
+My RC Tribe Thanks RCT!
So buttery.. nice build
Thanks Jason! It's one of my fav's
So awesome. I'm well on my way with my Wraith.
+Bill Roberts Nice! Thanks for watching, Bill!
Really great job! Looks just awesome.
+Land Of The Eagle - RC Videos Thanks LoTE - RCV!
looking great, are you going to race it? Maybe you can race Harley Designs.
+powcar91 Def gonna race it, not sure to what extent......Josh (Harley Designs) is a great driver.....not sure I could match that talent! Maybe put me behind the radio of my RC8B3e vs his MattZilla Ultra4! lol
quality work rich, it looks really nice. i'm looking forward to the running video.
+humble rc Thanks HRC! Just getting the final little things done...stay tuned!
@@TheRCNetwork ???
@@usafmfe100 Likely will never "really" run this truck, as it's a channel vehicle #shelfqueen
I bought a rig from LOU. It’s a beast you definitely get what you pay for.
Lue is good people. I went to his shop a few times. Probably was there a good 3 hours the first time, drank some Bud Light (way before Bud Light went down in flames) and talked about everything. I think he moved to Fresno (from Huntington Beach) and went completely off of social.
awesome build Rich. do you have a bec hooked up under there?
+2cwik4u104 No BEC, as the RX8Gen2 has a decent one......We will see if it can handle it though. The Futaba BLS172 cranks out over 500 oz/in of torque!
awesome power.
Thought we were going to see it run!
looks so awesome!
+RC Performance Studio Thanks RCPS!
Thumbs up to you. Excellent series. Really enjoy your videos. Please keep them coming.
+Cancun Tom Thanks Tom, always good to see you in the comments!
Use a mini Pico relay switch for the lights, had the same issue
+GMUMMY Got a link?
dude Rich...I'm drooling. ...
+Dave Aschenbrand Thanks Dave...I take that as a compliment! lol
Hey Rich have you tried the new Turnigy Graphene batteries ?
Read a few reviews and they seem to be the next big thing !!! Over 900 cycles with minimal changes to the batterie's IR and they have a high C discharge rate also.
+RC Marty I haven't tried the Graphene batteries yet. I'm about to order a couple, but I don't have huge hopes. I've seen that they have the Pro series and the standard series with a 65c discharge rate as the highest. I've tested 110c discharge batteries....
The RCNetwork The C rating isn't all that impressive, some other manufacturers have comparable ( or at least they say so ) cause nowadays high C rating sells, BUT, in the independant testings I've read, they did perform way better than current lipo batteries...
Time will tell I guess, I really hope it's a step in the right direction.
Looks KILLER man :)
+BushmanofYukon Thanks BoY!
That is beautiful!!!!
+GamerNRetro Thanks GNR!
wow that turned out awesome, great job !!
+RC Johnny Thaks Johnny!
Gorgeous
+Michael Wright Thanks for watching, Michael!
Whats the ballpark figure on a buggy like this? Those Vanquish parts start adding up to some serious $$.
Easily closing in on $3k - it can be built cheaper, but this is a flagship model for the channel
Id use a longer servohorn, gives a better steering angle
+Reely98 Yeah, still playing with the steering.....It's decent, just working on the angles
You may have already answered this, but can you tell me the sizes of the SLW hubs that you use on the front and the back?
TheAlonzof 450
Swwwweeeeeet !! great looking rig, I love it. RC fun for sure.
Thanks Andrew!
Never could find a video of it running.
Shiny. Would you by any chance be doing any other giveaways in the near future. Wink wink nudge nudge and are you going to be running wheel weights in this Spawn Zilla? Thanks.
+Richard Boustred No wheel weights in the SpawnZilla, it's much more of a fast rig than a crawler. and yes......there will be future giveaways.....just not sure when
very awesome rig rich
+ULTiMATE TRAXXAS MAN Thanks UTM!
+The RCNetwork very welcome
Looks great Rich! I have some Axial Helmet stickers if you want them. I also have some Axial mounting clamps from a universal light bar kit. They would work great to mount those lexan pieces to the rollcage! Send me a PO box or address and Ill get them to you ASAP. Love your channel!
+Bulletproof RC Thanks BPRC! I may hit you up for those!
very asome im very like this built but i have one question you futaba servo is water prov and can you give more information about this servo thank you very much for information
+eric stebenne Here's the unboxing of the BLS177 (the exact version, just with an aluminum top plate) th-cam.com/video/tD-ud1rudCc/w-d-xo.html
+The RCNetwork thank very much for iformation
looks like a great build,but your forgetting something. on all my builds I use the lowest gearing, such as 43/13 ring and pinions a big spur gear and a small pinion gear, to get the most torque from my motor.. if I want more wheel speed I go to a higher kv motor.and it always runs cool. but what im getting at is I break a lot of plastic rod ends,or I use to until I started using the rc4wd ss metal rod ends,. now my suspension is bullit proof. just my 2 cents, and I hope it helps someone..
+jb3161 Torque wise, I should be fine with the 2500kv Pro4HD motor from Tekin on 4s.....I agree on the plastic rod ends.....but those RC4WD ends are so expensive! lol Like that should matter at this point!
Swwwweeeeeet !! I love it, it looks absolutely Sweet.
+andrew richey Thanks Andrew. It's a great rig.....should have running footage of it soon
Fail! You didn't paint the driver helmet!!! Lol, just kidding bud, I know you said you'd get it done. It looks absolutely amazing. Really looking forward to seeing the run vids.
+Theibault Thanks T! Yeah, I've got some details to work out, but wanted to film the way it looks right now.....I'm just really impressed with how well everything came together!
The RCNetwork I'm jealous, it looks gorgeous.
I love it!
+Cory Lyons Thanks Cory!
Hey Rich, can you tell me approx. what this rig weighs?
+Erik St George I haven't done a full weigh in yet, but I know it was over 10 lbs last time I checked
Thanks... One other question I had. How do you like those shocks now that you've had a chance to use them? I am building a truck very similar to the spawnzilla and having a hard time deciding on shocks. Thinking either the prolines or traxxas big bores. Oh... and do you happen to still know the part number of those PL shocks? are they for the slash front or rear?
Sorry. I just watched the video again and got my answer on the shocks part number. But still would like to know how they worked for you.
Cool truck
Thanks Ryan!
What Chassis is that ? I really like it
+Rickshire Gishire (rgishire) It's made by MattZilla. Check the video description for his FaceBook page
slam that thing! amazing looking rig! should be nuke proof, are you going to u4 race or crawl?
+MrTurboShadow U4RC......It should do well in the trophy truck class
You need the break calipers from vanquish
+vtx1300handa Thanks VTX....After all that's went into this, I couldn't pull the trigger on those
+The RCNetwork yea ive been there but they do look nice
~SWEET~
+mtctookie25 Thanks MTC!
when will there be a sakura d4 video?
+Samuel Hwang Everytime you ask, I postpone 1 week.......lol If you find my instagram page, I have started (finally) working on the body. Should have an update soon. Be patient!
Damn dope!!
+KennyLee NYC Thanks Kenny!
O-O so badass
+lacucaracha111111 Thanks L!
Did I miss the video of it running?
+tpalshadow no video to date.....working on lots of projects
I'm not seeing a run video of this? this video is pretty old now. What's up?
+Mit Emluh yeah, no running video on this one yet. I saved it's condition to show off at RCX this year and right after getting back and some projects, they shut down the U4RC track at Irvine Lake. I still need to get the lights worked out and update everyone on the interior. Otherwise it is ready to run....just need time and a track! pS, what was your previous screen name? I recognize the avatar....
+The RCNetwork figured you were juggling a lot of projects, can't wait to see this run, just wanted to rem8nd you lol. my handle hasn't changed just haven't posted any comments in awhile. was waiting to post a comment once I saw this beast run lol
+Mit Emluh yeah, tons of projects right now.....I've got three to build and three more ready to runs to get going! I have a buddy that's gonna wrap up the wiring of the lights. Then hopefully a running video soon....just need to find a place to test it. I don't think regency is good enough for it.
+The RCNetwork well busy is good. btw would love to see your spin on a rc4wd trail finder kit. I know there are a lot of vids on these but I bet you would do something really cool with it.
I'm only getting a couple of upgrades and I'm done. lol
Nice!
BAD ASS
Thanks Jeff! This is one of my pride and joy's at The RCNetwork!
On the MIP shafts Supershafty has a female shaft that is longer.
+FILTHY5150RC Cool, good lead! I'll check it out
Man, that thing turned out GNARLY. Love it, looks great.
+LOCKDOWN RC Thanks LDRC! It's been a great build!
Lets rub some dirt on that virgin rig!!!
+RCTV Very soon, very soon!
i saw a maxamps in it not turnigy
That's a 3s 1800mah MA pack (under the hood)I have temp powering the lights. Since I'm running 4s Turnigy packs under the driver seat, the 11.1v VP lights won't do good under 14.8v
I should have a solution soon to power all under one battery pack.
okay rig looks awesome but what is the hey okay thing that you linked in the decription
+EVANZ it's a wiring module that allows for external battery power (for the lights) and plugged into the receiver to allow for 3rd channel control.
+The RCNetwork oh so you can just plug the light bar into the 3rd channel?
+EVANZ Yep, but its powered by an external battery - not needing a BEC
Cool rc vehicle. Way too much waffling on
Thanks for stopping by
Hey Rich I just published my Mattzilla vid check it out and let me know what you think
It looks great F5150! I may use a couple of your ideas for mine. Keep up the good work and keep posting videos.