CAT D7 IN FIELD PLOWING P1!!!
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2019
- Upgrading to a D7 because the ground is tough.
Filmed with: Canon VIXIA HF R800 Camcorder
Keywords:
cummins
12 valve cummins
24 valve cummins
2nd gen cummins
1st gen cummins
first gen cummins
dodge cummins
dodge
CAT
cat
caterpillar
caterpillar bulldozer
tractor
heavy equipment
old dozer
bulldozer
cat bulldozer - ยานยนต์และพาหนะ
![Yoshi Rinrada - 'มาทำไม' [Official MV]](http://i.ytimg.com/vi/r41xbfRLkLs/mqdefault.jpg)
He don't know what he is doing!
what are yall gonna plant there? also that field is really smooth or your backhoe rides like a caddy :P
tennis shoes again
no hearing protection no boots no gloves no hard hat no safety goggles wow
Hey man, im about to buy a cat 12T (1955 model) and it's got a d318 that spits oil out the exhaust pipe . Should I pass on it? I dunno what could be wrong with it. The motor runs fine no blow by or anything but it uses about a gallon of oil every few hours . Don't know much about these motors, I don't wanna buy a lemon .any advice?
@@johndowe7003 does the dozer move freely? Any bad sounds from drivetrain while at idle or in standard operation? That might help determine the sale.
I love that old D-7 ! What a beautiful song she sings !
The sweetest sound in the whole world, a D7 17a with a whopping big turbo on em. Fourteen litre four cylinder that dont rev over 1100rpm and are at their happiest at about 800. You can hear that turbo whistle for miles away and those old girls will just keep lugging down to when ya can hear each cylinder fire and each time it does the turbo will do its whistle. Best motor in the world. I own a 63 model identical to this, but with a set of triple tyned rippers that wouldve been more suited to a D8. They are made by an Australian mod called Standon. Driven off the pto with its own big oil tank. Beautiful old dozers, pre powershift days. Just lugging power to getcha thru.
Damn thing is like an armoured recovery vehicle i bet it could pull a tank.
I just bought a 63 D717a that was parked for 25 years. I’m still working on unseizing it! Pup motor turning and like new, just need to add more power to magnets in magneto!
To all the negative commenters- just enjoy the sight and sound of a fantastic old dozer. Most of us, if given the chance, would love to hop on that thing and pull the disc around.
Haven't seen many video's Diesel. Thank you for this fine one.
We had one of these on our farm. My father paid $2,000;for it in the early 70s. Such a powerful machine.
I am sure you know but for those who don't , if you turn a offset disk which that is to the left it works a lot better .
That's somethin. Never seen a dozer push started before. It went pretty smooth too.
I love Caterpillar and Allis Chalmers bulldozers.
Old school.....nice.
Very good condition is the best of luck for
That's one of the bigger cat pony motors. It has its own front loader and back hoe.
Thumbs up on your nice video.
I'm looking at this piece of equipment and then looking past it and arou d it. Can someone tell me where I'm supposed to be looking for plowing. I'm lost. I only see discing behind a dozer. What a waste of time.
Pop starting a dozer hilarious
He'll be replacing the under carriage on that D7 soon.
Wowsers totally didn't realize that dozers can be push started
From horse drawn to
Cat,Old technology, now obsolete..
To The John Deere today plough 20a in hr, Amazing😁
when machines are so powerful u think if u get ran over by one wearing boots and a hard hat will help its gonna be fatal if u stuff up no matter what so who cares i like the look
Yes with a off set disc your suppose to make left hand truns because eventually he i going break blades and axle of that disc
Этот кот, завёлся быстрее чем моя новая веста🤣
Let's see how the old D-7 would handle a big sub soiler attachment
creo que la lanza está al revés, para la apertura que le dio, debería modificar el tiro de lanza, pero ya esta en su punto máximo, tendría que darla vuelta y probar mover el perno de 1° al 5° agujero
And for the record that's a disc not a plow so he is discing not plowing
He should be discing in a counter clockwise direction and making left turns. Going to bend or break the disc frame turning to the right.
There is such a thing as Disc-Ploughing. Discing normally refers to using Discs as a secondary cultivation process after the initial Ploughing is done. Normally sets of Discs designed for Disc-Ploughing have scalloped discs on the front row to cut trash or long grass.
Where I’m from we call that disking!!
No, At 2 mph, That's a funeral march.... So sad...
Bobby Alley I sure isn’t working very well thinking he should be using a plow.
@@davidglaum2538 The best solution would have been..
Mowing, Raking, and Harvesting... Then..
Ploughing... then and only then..
Disking.
And use 80 to 150 Hp wheeled tractors for all the above.
.
We called it breaking new ground because that is what the implement is used for. No transport wheels, Most likely old DOT equipment.
@@hiscifi2986 Looks like old DOT equipment, meant to be pulled by a dozer. No Hydraulics, No Transport wheels.
I had the same rome disc I put a hydraulic cylinder on it to open an close does a great job,, I sold it now regret it
Sometimes the older stuff, whilst being a bit more dangerous, is just superior. Heavy Iron never tires, it simply becomes too hard to pull!
Si das la vuelta ala derecha puedes quebrar la rastra
Need a sunflower plow.
Looks to be a large cover crop disc. Should be making left hand turns instead.
Yeah you gotta turn with the disks or it puts a lot of stress on the implements, I buried myself to the axles going against the disks before lol
@@johndowe7003 My dad had one years ago that he loaned to a neighbor and the neighbor broke a couple of discs by turning right. My dad was strict with me to pull in left turns only if ever used.
@@Drew6709 yeah I believe it, it aint really expensive to fix, just a pain in the ass
Drew6709 that’s called an offset disc To really discing
When you do a job incorrectly it’s just a waste of time, money, and fuel.
Until now, I thought this was only possible in Russia
Who’s the driver on that cat, sure don’t know how to disc, break out the machetes and clean clogs
The real name of the implement is a tandem made by conner shea
What a bloody mess he`s making !
What is he trying to do?
It's doing a good job.
Nossa que tranquerada
I really cant figure out what he was trying to do main thing is looks like he was enjoying him self
Needs a 4 bottom plow to do the first cut then use the disc harrow to smooth over the first cut.
Heavy old covercrop disc. Looks a bit muddy.
Wouldn’t this be considered discing?
It's a plow pretty much, those disks go down a foot or more into the ground
Not a plow its a disk harrow. Dont comment if you dont know. A subsoiler goes 18 inches in the ground and its not called a plow.
@@Dougarrowhead its not a disk harrow ya twat. a disk harrow only breaks up the clogs of dirt and a disk plow prepares a seed bed with rough tillage. they look the same but are used different. also i didnt call it it a plow i implied it does the same job as one.
@@johndowe7003 i farm for a living. Youre an idiot this is an offset disk harrow. Its not a disk plow or anything else.
@@Dougarrowhead i reckon I said that? I didn't say it was a plow , I said it does roughly the same job as a plow since they down down about the same depth. You still gotta harrow the field afterwards cause it leaves such a rough finish
Maybe it needs new blades?
That ain't flower that's called disconnect plowing is when you actually sink a plow bottom into the ground and it rolls the soil that is what plowing is that is dragging a disc following means you are rolling over
U need a big cover barn for all those nice peace’s of equipment so they don’t rust away
Cut and bale that beautiful hay first..or put cattle on it and graze it..
If he doesn't know the difference between a disc and a plow, that may explain why the offset disk is turned to the right instead of the left as it should be. Have to wonder why he didn't clean the clogs out of that disk... Lots of hay lost there. I guess he is just playing.
What's the point of that?
мне почему то кажется, что такой техникой можно было сделать перевал глубиною 50-80см, а не диски таскать...
Надо было сперва сено скосить, потом дисковать!!
I have a Rome like that it's tortured me we tortured it,it tortured our jd8760.
So why did you stop making videos for so long?
Sometimes I don't have anything interesting to film and that affects how often I can upload new content.
Wrong equipment for the job.
Not if it's full or masquite
Me thinks they have lost the grease-gun.
La pura cagason con ese... Romperador. 🙈
El chófer del tractor no tiene experiencia de las vueltas alreves tiene ke boltiar al lado izquierdo
Big Estr ard nol
Making a wadded up mess is what it looks like.
Bananas
What in the hell are we looking at the ground for, I’m outta here !👎🏻 Gonna go watch Andrew Camarata videos 👍👍
I cut my grass first before plowing.
Would anyone agree with me
He is driving the wrong way . go the other way and it comes out of the ground when you turn. I have a rome disk just like this.
Am I the only one who knows that those are not plows that the D-7 is pulling?
There is such a thing as Disc-Ploughing, when Discs are used as the initial cultivation implement, as opposed to their normal use as a secondary cultivation tool.
you always turn to the left with a offset ----not right
that's not a plow....it's a tandem disc
Didn't see any ploughing
Thats not ploughing, just saying
In my neck of the woods they are called Offset Discs,,
Not Ploughing Discing
May be it was better tocut the grass before...
No shit
He fuck up big time
Is there a purpose to this
David : it's called having fun.
Just cost 5000 dollars to plow that field. lol
I’ve ranched and farmed for 60 years. What in the hell are they doing? Wasting grazing. And misusing equipment. To start.
He's cuttin' under a gold mine to start with. He could combine the Gaillardia in a few weeks and make a killing selling wildflower seed. Another thing is cutting the field for hay after the seeds mature, not teddering at all. Just let it lay there 3 or 4 days .Rake it, bale it.
Sell it to the D.O.T. for top quality mulch hay.Only though this hay is packed with native wildflower seed worth around $80.00 a pound. A win for a D.O.T. of any state, since most States try to encourage wildflowers. Ask an outrageous price and get it. Turn it, harrow it, disc it, lay it off, bed it up, set irrigation, plant it in late squash, cut about 4000 boxes at $20.00 a box til frost. That's the kind of dreamin' that makes us farmers.
The dozer is to heavy for the field
Hythat looks
Your tracks sgould not look like the top part of the Golden Gate Bridge. Just sayin'.
Im no farmer but this doesnt look right🤔🤔
At least you shouldn't break a cable on that job.you shouldn't (•‿•)
Why is he making right turns wasting a lot of time
You need to turn the ground over before you disk it and half your disk are riding above the ground. See ya and good luck, being from tezas should know better.👎🏻
A shit set of Tandem Discs. Totaly the wrong implement. Start with big Giant Discs to turn it over. Failing that mow the fecking grass first.
Thats a disc not a plow and a shity job of it
They don't have a clue what there doing
Weirdest looking plow I've ever seen
Este operador no sabe Rastrear las vueltas con rastra son alas Isquierda
ดิ
Adonde habrá aprendido este seudo operador, pues está dando las vueltas contrarias... Y al dar las vueltas de esa manera.. Castiga discos y chumaceras.malo,malo, málo.👎👎"
That\s plowing? What a joke.
What waste of desiel
Caterpillar D717A?
Should have used a plow disc was the wrong implement for this job!