Easily done on a 2014 Crewmax. I simply grounded the wire without a switch since it is controlled by the running lights. It is also nice that the running lights turn off with the ignition. That way I can always leave it on and not have to remember to turn it on.
I believe what he done was ground wire from Relay to ground OEM parking light hardness bulb socket. There should two wires be hot and ground. Tie to ground.
So I can just directly ground the relay and have fog lights on every time I turn my regular lights on???? Meaning with out the switch that was installed in the cabin.
I just bent that pin that he bent added a wire to it like he did and looped it around out of the fuse box right around to the negative battery post. No disrespect to the guy who made the video but he made it more complicated that it needed to be. You dont need an extra switch.
Joshua Haviland what do you mean you don’t need an extra switch? How’d you do yours? Where’d you run your wire to? I have a 14 CM and would love this mod.
@@jeremyrayl4770 I have a connector off the fog light relay to the negative battery terminal that's it. The fog lights work with my factory headlight switch on the column. Fog lights come on with daytime running lights and dims and brights. You can not turn fog lights off with headlights on but I want them on anyways.
Joshua Haviland would like to see a few pictures or a short video on how you did it. I’ve tried what other vid’s have shown and have not gotten it to work. Thank you in advance!
You could have used your existing fog light switch just needed to run a positive input to the relay instead of a negative ground follow me. Preferably a key switch on input
I need someone to show where to connect red and black wires on the switch. And where to wire red wire with ground. Cause I did exactly like on this video and the fog lights just don’t turn on.
Ok let me get this correct... Adding or tapping a wired onto the relay which is the ground Pin, and run the wire into the firewall until it show up inside the truck. Which the wire will run to the on/off switch that you add. Than you take the power and the Acc from the factory fog switch and joined those two with the on/off switch. Correct or Wrong.?
On my 2013 TSS the switch is unnecessary. I get DRL with no fog light when my lights are off, I always have DRL on no matter what cant change it. DRL with fog light when my parking lights are on. Lights and HB fog light is on. I have the switch on it but I have not run it into the car. Its right there in my fuse box left switched on. If I ever wanted to run my headlights without fog lights I can simply open the fuse box and switch them off. The wire goes from the box to the 2 prong switch and then from the switch to the ground
I wish he show more on the switche that he use to connect to the ground so inwill know what he did . I want to do it but he not provided the video on removing the panel and see how he did it
cmonster6 Try this one. It's not what i used so check it out good: www.ebay.com/itm/FOG-LIGHT-SWITCH-FOR-TOYOTA-CAMRY-COROLLA-TACOMA-TUNDRA-MR2-/181312510882?hash=item2a37115ba2:g:wJsAAOxyA4ZRL5FS&vxp=mtr
I know this video is 10 years old and you might not even own the truck anymore, but I have a question! When the rocker switch you installed is turned on, do the fog lights only come on when the fog light switch on the stalk is turned on, or do the fog lights come on and stay on for as long as the rocker switch is turned on?
ILL DO THIS TOMMOROW. guys serious question. my fuse box cap is damaged should i replace it? (its dirty in there) and its telling me that i have the defog fuse missing. what do i do?
We offer a nice alternative plug and play solution for Toyota Tundras with some more options. We just released our Brite Box Anytime that give you full control of your fog lights and allows you to turn on your fog lights on and off anytime with our custom switch or your very own. We have up to 3 other types to choose from: 1.) The Brite Box - keeps low beams on with high beams 2.) The Brite Box with Fog Light Control - keeps fog lights AND low beams ON with high beams 3.) The Brite Box Fogster will keep fog lights on with high beams. With BRITE BOX you can enjoy the benefits of these beam patterns, without placing additional loads to your vehicles stock headlight switches or wiring. You can find the product and more information here www.aspireautoaccessories.com/product-page/the-brite-box-for-toyota-tundra
We offer a nice alternative plug and play solution for the “fog light mod” called The Brite Box Fogster and we have up to 2 other types to choose from. The Brite Box with Fog Light Control will turn on your fog lights AND low beams on at the same time & The Brite Box will keep low beams on with high beams. With BRITE BOX you can enjoy the benefits of this beam pattern, automatically, without placing additional loads to your vehicles stock headlight switches or wiring. You can find it here www.aspireautoaccessories.com/product-page/the-brite-box-for-toyota-tundra
I understand we're working with the ground wire but just let me see if I get this correct you run your wire from the relay back to the firewall into a separate switch to install on the dash then you run another wire from that switch to a ground somewhere or does that second wire have to run to a Pacific location
I did the same 2 years ago, and is good to know some one else have the same idea, thanks for upload the video.
Works awesome on my 2010. Totally saved me. Trying to install aftermarket fog lights to existing factory wiring. Thank you!
Easily done on a 2014 Crewmax. I simply grounded the wire without a switch since it is controlled by the running lights. It is also nice that the running lights turn off with the ignition. That way I can always leave it on and not have to remember to turn it on.
Aaron Thompson can you please tell me exactly what you did I have a 2014
Aaron Thompson can you help me with mine. I’m not getting this to work for me. If you have pics or a short video that would be great.
I believe what he done was ground wire from Relay to ground OEM parking light hardness bulb socket. There should two wires be hot and ground. Tie to ground.
So I can just directly ground the relay and have fog lights on every time I turn my regular lights on???? Meaning with out the switch that was installed in the cabin.
Perfect video!! Thank you.
I just bent that pin that he bent added a wire to it like he did and looped it around out of the fuse box right around to the negative battery post. No disrespect to the guy who made the video but he made it more complicated that it needed to be. You dont need an extra switch.
Joshua Haviland what do you mean you don’t need an extra switch? How’d you do yours? Where’d you run your wire to? I have a 14 CM and would love this mod.
@@jeremyrayl4770 I have a connector off the fog light relay to the negative battery terminal that's it. The fog lights work with my factory headlight switch on the column. Fog lights come on with daytime running lights and dims and brights. You can not turn fog lights off with headlights on but I want them on anyways.
Joshua Haviland would like to see a few pictures or a short video on how you did it. I’ve tried what other vid’s have shown and have not gotten it to work. Thank you in advance!
Do you know if this process works with all 2nd generation tundras?
Can you still turn them off when the any of the lights are on? with the OEM switch on the level attached to the steering column
just don't forget readers, you are going to work in the GROUND of the fog light relay, not the positive
If I have an aftermarket switch displaying red, white, and black which wires do I connect the red and white to?
You could have used your existing fog light switch just needed to run a positive input to the relay instead of a negative ground follow me. Preferably a key switch on input
Do you have a how to vid
What kind of wire you used for that?
Instructions not clear my tundra caught on fire.
I need someone to show where to connect red and black wires on the switch. And where to wire red wire with ground. Cause I did exactly like on this video and the fog lights just don’t turn on.
thank you worked like a charm
Ok let me get this correct... Adding or tapping a wired onto the relay which is the ground Pin, and run the wire into the firewall until it show up inside the truck. Which the wire will run to the on/off switch that you add. Than you take the power and the Acc from the factory fog switch and joined those two with the on/off switch. Correct or Wrong.?
On my 2013 TSS the switch is unnecessary. I get DRL with no fog light when my lights are off, I always have DRL on no matter what cant change it. DRL with fog light when my parking lights are on. Lights and HB fog light is on. I have the switch on it but I have not run it into the car. Its right there in my fuse box left switched on. If I ever wanted to run my headlights without fog lights I can simply open the fuse box and switch them off. The wire goes from the box to the 2 prong switch and then from the switch to the ground
I wish he show more on the switche that he use to connect to the ground so inwill know what he did . I want to do it but he not provided the video on removing the panel and see how he did it
Does anybody know what switch part number this guy used... I have been looking for one that fits the blanks perfectly and cannot find
how did you wired the switch from inside?
how did you excatly wire the back of the switch? one wire to ground and that wire in?
How can this be done on a 2015 Corolla S model, would it be the same process as you have described?
If I'm correct all y9u need to do is run the negative cable to the switch right?
Did you remove your security horn relay for extra space? Or is this different than my 2010?
I need some help wiring some fog lights to my 2015 tundra
Can u provide a Toyota part number for the switch?
cmonster6 Try this one. It's not what i used so check it out good: www.ebay.com/itm/FOG-LIGHT-SWITCH-FOR-TOYOTA-CAMRY-COROLLA-TACOMA-TUNDRA-MR2-/181312510882?hash=item2a37115ba2:g:wJsAAOxyA4ZRL5FS&vxp=mtr
I did just that and my fog lights don’t turn on at all.
I tried this today and my fog lights don't come on
great video!! where did you run the ground wire to? and how many pin switch did you use? I really want to do this to my 13' tundra cm rw.
kingallen916 I just did the same thing check my video. Easier that this. Which by the way in this video i got the idea.
Gracias por el video muy bien explicado, ( como puedo conseguir el diagrama para toyota tundra 2010
Where did you get power for your switch did you have to splice into a wire?
power comes from the battery
How do you connect the switch???
just line up the shape and plug it in
What abt camry 2005 ? There is fog fuse only not relay ?
I know this video is 10 years old and you might not even own the truck anymore, but I have a question!
When the rocker switch you installed is turned on, do the fog lights only come on when the fog light switch on the stalk is turned on, or do the fog lights come on and stay on for as long as the rocker switch is turned on?
ILL DO THIS TOMMOROW.
guys serious question. my fuse box cap is damaged should i replace it? (its dirty in there)
and its telling me that i have the defog fuse missing. what do i do?
This should work on a 2017 Correct?
Rule 226 highway code foglamps not to be used when not foggy out, also clear definition of fog lights is to extend the range of your high beam lamps
Doesn’t work
I did it this way n it works great
toyotaofmcdonoughparts.net/blogs/news/6502667-toyota-tundra-fog-light-kit-frequently-asked-questions
We offer a nice alternative plug and play solution for Toyota Tundras with some more options. We just released our Brite Box Anytime that give you full control of your fog lights and allows you to turn on your fog lights on and off anytime with our custom switch or your very own. We have up to 3 other types to choose from: 1.) The Brite Box - keeps low beams on with high beams 2.) The Brite Box with Fog Light Control - keeps fog lights AND low beams ON with high beams 3.) The Brite Box Fogster will keep fog lights on with high beams. With BRITE BOX you can enjoy the benefits of these beam patterns, without placing additional loads to your vehicles stock headlight switches or wiring. You can find the product and more information here www.aspireautoaccessories.com/product-page/the-brite-box-for-toyota-tundra
2007
We offer a nice alternative plug and play solution for the “fog light mod” called The Brite Box Fogster and we have up to 2 other types to choose from. The Brite Box with Fog Light Control will turn on your fog lights AND low beams on at the same time & The Brite Box will keep low beams on with high beams. With BRITE BOX you can enjoy the benefits of this beam pattern, automatically, without placing additional loads to your vehicles stock headlight switches or wiring. You can find it here www.aspireautoaccessories.com/product-page/the-brite-box-for-toyota-tundra
I understand we're working with the ground wire but just let me see if I get this correct you run your wire from the relay back to the firewall into a separate switch to install on the dash then you run another wire from that switch to a ground somewhere or does that second wire have to run to a Pacific location