DIY Square Drilling Machine
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Project no.113 DIY Homemade Mortiser Drilling Machine
This project really drills a sqaure hole with a mortiser bit,
this will helps a lot to make a mortise for a tenon joint.
i used P204 bearing pillow block as a linear bearing and it works well in my case.
all mild steel plate used are 5mm thick
i used a 1/2Hp water pump motor, i adjusted the value of the capacitor to have enough power to drill.
and the clamps are from my old long bar clamps
LINKS THAT HAS BEEN USED IN THE VIDEO:
Machifit MGN12H Linear Rail Block:bit.ly/2WFBoyn
Machifit MGN12 600mm Linear Rail Guide with MGN12H Block: bit.ly/2HT4WVP
Machifit MGN12 1000mm Linear Rail Guide with MGN12H Linear Sliding Guide Block: bit.ly/2FSsVSF
YOU CAN SUPPORT THIS CHANNEL BY BUYING THIS ITEMS.
8mm Bore Diameter Pillow Block Ball Bearing: bit.ly/2OJeHX3
7pcs 12mm Shank CNC Lathe Turning Tool Holder Set: bit.ly/2K4VBMy
G1/4-19 13x2mm BSP 55 Degree Tap: bit.ly/2TSVnrB
Titanium Coated Deburring External Chamfer Tool: bit.ly/2OG5HCi
Pillow Block Bearing: bit.ly/2uE97MG
Push-pull type fast clamp: bit.ly/2FQ5k3N
2032mm x 13mm Saw Blade: bit.ly/2QRKYQb
Handheld Copper Pipe Tube Expander: bit.ly/2rWa6pW
SBR20-1200mm linear rail and SBR20UU Blocks: bit.ly/2RiKUIC
SBR16 1000mm Linear Rail and SBR16UU Bearing Blocks: bit.ly/2GIcniW
Drillpro Turning Tool Post Holder: bit.ly/2EUban5
SANOU K12-100 Lathe Chuck: bit.ly/2TextHc
Slide Bearing Block: bit.ly/2RhZe4d
Slide Bearing Block: bit.ly/2Q6K4tU
20Pcs Diamond Coated Core Drill Bit Set: goo.gl/mPZ4B6
Opening Locator: goo.gl/sQmMce
LIKE MY FACEBOOK PAGE / pinoydiybuilds
SUBSCRIBE TO MY CHANNEL / sekaustria
AND SUPPORT ME ON PATREON / sekaustria
Like Share Subscribe for a Weekly Videos
#SekAustria #SquareDrill #MortiserMachine
woow ayos yang wood drill mo bro ayy lupit
Thanks bro.
Can i call you sensei 🙇🙇🙏🏿🙏🏿🙇🙇
😊
Good morning idol. Pwede po ba send mo sa akin mga materialis lahat na na purchase doon sa mini lathe machine pls idol gusto ko gumawa
Nasa description ng video mga product links
@@SekAustria copy idol
It's ok provided you have access to a welder & engineering workshop which don't have..
IT !!! Seems !! THAT !! YOU ! NEEDED A TRULY !! PROPER !! SQUARE !! DRILLING!! MACHINE !! WELDER !! ANGLE !! GRINDER !! TO !! MAKE !! YOUR !! OFF !! SQUARE !! ANGLE !! DRILLING !! CONTRAPTION !! WITH !!! NOT !! TO !! MENTION !! OTHER !! OFF !! SQUARE !! JOINING !!
Very cool build. We shared this video on our homemade tools forum this week :)
idol meron din ako 1/2 hp motor anong capacitor ang pinalit mo sir?
Anong motor? Water pump or induction motor?
D table can't move left n right
Galing idol sek.
Salamat bro
Sir request diy cylinder boring and or honing machine😁
WOULD ! NOT !! DO ! ANY !! GOOD !!
@@davidwillard7334 Why is that? He is one of the reasons why I'm proud to be kapampangan😁
What's the advantage of this over a drill press and a cross slide vise?
Drill presses almost universally use a Morse taper to hold the chuck in which is not meant for any side loading, only straight down and regular drills aren't meant for side cutting as their cutting edges are on the tip only. so even if you put an endmill in a drill press so you can cut horizontally, you will eventually loosen the taper that holds the chuck in the spindle (unless it has a bolt through the other end of the spindle, but very likely not since Morse tapers aren't designed to be bolted in, only pressed). Even taking very light side loading cuts with an endmill, it will be enough to eventually loosen it and drop the chuck.
These are also called mortising machines. They use a special bit that is essentially a square chisel with a drill bit inside so that as the drill drills out the center, the corner chisels effectively square cut the hole as you put downward pressure on the chuck/spindle and thus, you HAVE to keep drilling vertically to square the hole, otherwise you will also end up with a rounded mortise pocket.
Hope that helps!
@@shirothehero0609, Thank you. Exactly, using those mortising bits you could easily just use a drill press, a cross vise would be for convenience only so you don't have to keep moving and reclamping the piece. It just seems like a lot of trouble to me for something that could easily be done on a drill press, BUT, it is a great idea and build anyway.
@@Enigma-Sapiens absolutely. And I totally agree, a lot of extra work to make a single purpose tool, but definitely still cool. Even though this could have been done in a much more simple fashion using a drill press.
@@shirothehero0609 NICE !! B.S !! HERE !!
desain anda terlalu kaku
Mahusay
Hello. Since the video is edited, would you do me a favor not to record the welding points? my eyesight is very delicate, sick. Thanks and regards.
Why use a UCP 205 bearing ??? You have shafts SBR16)))
I dont have many of that.
THERE !! NOT !! MAKING !! ANY !! BEARINGS !! FOR !! YOU !! TO !! USE !! ANYMORE !!
Amazing
Thanks for stoping by
Pa notice idolo ganda ng gawa mo
Tulog na bro hahaha
Turn your grinder over
Stop using the skinny wheel on the wrong side of the wheel very dangerous
its a bad example for al the newbies
👍
Nice 👍🙂 idol
Thanks
projeto interessante mas tem um erro mancal não foi feito para deslizar o eixo e sim girar o eixo nesse projeto havera um desgaste no eixo poderia ter usado um rolamento pilowblock
Awesome work. Your a genius
Thank you! Cheers!
bien réalisé, mais il semble quand même qu'il faille appuyer fort, peut être que le levier est trop court ?
bravo
LIKE
Really fantastic work, dude! 😃
A machine like that for woodworking is amazing!
Stay safe there with your family! 🖖😊
Thanks Mc
Now I can finally get that square peg into a round hole. Genius AF.
Good job. Congratulations 👌.
🎓Exellent main frend🍻
My greetings from
Serbia
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks
maximal depth??
MUY BUENA HERRAMIENTA COMPARE........MUCHAS FELICITACIONES....SALUDOS DE REYOSA
Thank you
Nice work, but you already have a drill press and the morticing chisel bit. So, don't you just really need a slide mount vise to hold the wood? Same functionality except one fewer dedicated tools in the workshop.
But then he wouldn't have a project video. ¯\_(ツ)_/¯
I already did that with my previous project, but its a lot of work when you set it all up and dismantling.
@@SekAustria That's fair enough. If you use it dedicated enough, then it's worth it
Máster 🙏 👋👋👋👍
Thanks
Excelente proyecto muy bien desarrollado y mejor ejecutado , una escopleadora magnífica , gracias por compartir tanta creatividad , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España ) 🤓 😜
Thanks
Whats the electric motor horse power And rpm?
1/2hp and 2400rpm
hi dude cool project! Just one question, why you dont use the other welding machine in the back of you at the second 0:38?
I want to but, cant find argon/co2 mix for mig welding here is In ph.
THANKS Sir.🐱
Otimo
Thanks
Interesting little machine, I can certainly see it being very handy for furniture making.
Thanks