You should do a catch can or just vent the breather to atmosphere. From my experience with Hondas no oil will come out of the breather but it will come through a PCV valve, I can't remember if D series has them. I always run a catch can for my PCV then vent the valve cover to atmoshpere.
elliot438bcfc I get that. All I've done on mine is plug the hole on my whale dick intake and fit a breather filter to my rocker cover to stop the shit getting into the throttle body
Good info, my PCV valve just breathe to the atmostfere because the last time I did intake manifold gasket change I don't have idea about it....is it give any effect to the car?
haven't owned a honda in a long time. just picked up a 95 integra for rally cross. back in the day I had a built turbo d series. At the time it was more of a "can I make it work" scenario. no body wanted them. no I think they are my favorite motor from honda. they really make the car light on its feet compared to the other motors. naturally aspirated they are kind of wimpy. turbo or super charged they are great.
hi.i recent 3 days ago resurrect my civic ex d16y8...4years parked in a dark room but this year i make they works again.its easy light and fun i like this engine. is not a bullet but fun enought :D
@@jaw-waadhendricks3903 it's the sensor for the which helps with air fuel. So it's called the air viewer ratio sensor it usually goes on the manifold for d-series and b series engine's
*_I think it is if you take your car to the track or love to thrash it. I've been thinking allot of doing a Y8 intake conversion on my Y7 as well. Although it will be for performance purposes_*
Wow bro I’m doing this exact same swap for my car well at least I’m getting all the parts together unfortunately I don’t have the space to work on my car
I like the vid. You should really think of getting a new map for the car now. After switching the intake manifold, what happened is your engine is getting a lot more air, but the same amount of fuel so your AFR is bad. Valves especially no like. I heard you can also get a fuel presure regulator from like B20 CRV to feed more fuel but that you would have to check for yourself. Anyway, better save then sorry, espescially when you track the car and hit high rpm.
@@RefineMovement Sorry my English is bad, I'm from Mexico. when riding the acceleration body y8 did you use the same harness of y7, throat y7 and injectors y7 ???
I had the same car with the crappy y7. I converted mine to vtec. You should throw the y8 head on there and wire up vtec and convert the car to obd1. Makes the car run way better
Well I just totaled my ek and I have a good engine with the vtec head I am currently dismantling if your interested in the head I'll sell it to you cheap
loose the y8 intake mani and password jdm intake tube. the z6 intake mani and a 2.5 tube with velocity stack, both of these have been dyno proven to make more power then the later.
Hi my question is my daily is auto but it's haves the big air box like yours would I need an automatic Y8 intake or would a 5speed y8 intake work fine and will it be all plug n play
Question... I see you guys use a lot of PassweordJDM parts... have you tried getting sponsored by them? Just wondering how hard it is to get sponsored. But keep up the good work, love the Videos.
Yeah, they seem to have some good quality parts and for the right price. We've never approached them about any sponsorships, it's a good idea though. I don't know if I've ever seen them sponsor someone. I have no idea if it's difficult to get someone like them to sponsor but I'd imagine everyone hits them up about giving out "sponsored" aka free parts lol so yeah, I dunno. Doesn't hurt to ask though
Use Toyota's Denso FICD and it will settle down the idle, dont forget about your IACV aswell, clean and settle it up. I did that to mine but when turning on the A/C it suddenly feels soo heavy
Can you just show us the wheels. The fact that we have to wait 4 weeks just to see wheels is boring. You upload once a week why wait so long to do everything .? No trying to be negative but seriously
may I recommend putting on some actual music during fast-forwarding parts instead of just the elevator music? kind of like what B Is For Build does. just a thought. nice vid.
+Dc2 There music doesn't to be any more "real" then ours, it just sounds like a different style. We all have to use copyright free music to be able to get revenue from TH-cam.
Don't you get embarrassed driving such a raspy and loud Civic on the streets? I understand this is a track car, but throwing on a resonator should hurt flow that much, especially with such a low output car. Not bashing or anything, just suggesting
+Vincent Poon yeah it’s alittle embarrassing but it’s really only loud when I have wide open throttle. There is a resonator on the pipe just no cat and no muffler. To be honest the car is uncomfortable on the streets with the mods I have done. It’s a full on track car now which I am fine with as it feels amazing on track. I am have a Mazda3 I daily. Thanks for watching!
You should do a catch can or just vent the breather to atmosphere. From my experience with Hondas no oil will come out of the breather but it will come through a PCV valve, I can't remember if D series has them. I always run a catch can for my PCV then vent the valve cover to atmoshpere.
elliot438bcfc I get that. All I've done on mine is plug the hole on my whale dick intake and fit a breather filter to my rocker cover to stop the shit getting into the throttle body
Good info, my PCV valve just breathe to the atmostfere because the last time I did intake manifold gasket change I don't have idea about it....is it give any effect to the car?
haven't owned a honda in a long time. just picked up a 95 integra for rally cross.
back in the day I had a built turbo d series. At the time it was more of a "can I make it work" scenario. no body wanted them. no I think they are my favorite motor from honda. they really make the car light on its feet compared to the other motors. naturally aspirated they are kind of wimpy. turbo or super charged they are great.
+Texas Car Nerd good to know for the future thanks !
Texas Car Nerd I've just put a turbo on my stock d16y7. Just waiting to get her tuned for some real fun
hi.i recent 3 days ago resurrect my civic ex d16y8...4years parked in a dark room but this year i make they works again.its easy light and fun i like this engine. is not a bullet but fun enought :D
*_Dope build! I never knew the EX exhaust had the cat moved back. I was looking for an exhaust like this but was just going to get one custom made._*
nice vid,can you tell me why your car was idling up and down and how did you fix the issue? thanks
Generally it has to do with your IACV (Idle air control valve) having issues, may want to try cleaning it out
Do u have a video how did you install the y8 intake manifold step by step
The Y7 and the Y8 throttle body gasket are the same?
The 1st time IM swap is a bit difficult, but on the 2nd time its very easy. i did it 2 times already
I love it lol i hope i do mine soon i got a d16y7 ek hatch
It's the air idle sensor always when the idle jumps up and down like that happened to me twice with Hondas
The sensor that goes on the iacv ?
@@jaw-waadhendricks3903 it's the sensor for the which helps with air fuel. So it's called the air viewer ratio sensor it usually goes on the manifold for d-series and b series engine's
Those zerg gaskets always leak, you need to get the hondata ones
the y7 has a 3 wire iacv, and y8 has 2 wire
What is the hose under the pcv valve going to
What does the bottom hose go to under the top one that ia the pcv valve
Hi is it worth just doing the intake
*_I think it is if you take your car to the track or love to thrash it. I've been thinking allot of doing a Y8 intake conversion on my Y7 as well. Although it will be for performance purposes_*
I have a d16w1 hrv 2005 model and just want that little bit extra and the sound obviously
Also bro will u notice any gains
can't wait to see the wheels
+CloudGamerz they are super cool! Lol soon my friend soon!
Wow bro I’m doing this exact same swap for my car well at least I’m getting all the parts together unfortunately I don’t have the space to work on my car
can you send me the second beat thats playing at 8;49
What are the benefits from this swap. I'm wanting to make my little y7 breath better
That’s really it. Breathability. Little better throttle response
Either Y8, or the Z6 intake will give you more power they are almost the same with performance specs
Will you do an a/c delete? You said your car isn't your daily right? I'd be interested in watching
+Don Izzo it's not my daily so I am thinking about it. I'm replacing the clutch in a week or 2 so I may do it when the tranny is out.
why not just do a y8 or z6 head swap?
because money
Did you extend the wires or anything at all? I just did mines and the fuel injector wires won't reach the fuel rail...
+Mongerz I think I cut the wire loom and was able to pull them close enough.
I like the vid. You should really think of getting a new map for the car now. After switching the intake manifold, what happened is your engine is getting a lot more air, but the same amount of fuel so your AFR is bad. Valves especially no like. I heard you can also get a fuel presure regulator from like B20 CRV to feed more fuel but that you would have to check for yourself. Anyway, better save then sorry, espescially when you track the car and hit high rpm.
did you fix the high idle i didn't catch that part was it throttle cable to tight or was it the gasket
+zachary ayers to be honest I'm not sure what fixed it. I think it might have been the gasket
well atleast its fixed also thanks for continuing to make videos every week it gives me something to look forward too each Monday
+zachary ayers thanks for watching!
Did you cut the rear bumper or did the car come like that when you bought it
Check out my other videos we cut the bumper
damn that name takes me back.
When changing the admission, did you use the same harness and ecu or did they change it?
please respond, I'm about to make that change.
Not sure what you mean?
@@RefineMovement Sorry my English is bad, I'm from Mexico. when riding the acceleration body y8 did you use the same harness of y7, throat y7 and injectors y7 ???
Yes. It should be in the video what I used
what intake gasket did u use
Hey what throttle body gasket you use? There’s 2 auto and Manuel
+Jamesy_ EK9 to be honest I can’t remember whatever one that matches the intake.
What pedals do you have on your car?
EK9 type R
@@RefineMovement would you be interested in selling them?
Yo Refine, so your exhaust setup is y8 headers , Dx piping to no muffler?
+Traplord ENCORPARATED now it's everything from the EX with no cat and no muffler
did the iddle go back to normal after you changed the intake gasket
+blix8787 yes it did.
what the differents in power gain with y8 intake
Maybe lost hp
Why don't you use Y8 240cc injector ?
If u use the those with the Y7 computer it will run too rich
now look for an 96-97 integra LS ecu so you can get more air and fuel.
After 2 years...you think this mod it's a good idea?
Not worth it because the carbon fiber absorbs a ton of heat
At 12:58 you look embarrassed that a car was passing you when you were flooding it and he was cruising. Time for a head swap.
what rims do you have
Konig Hypergrams 15x7.5
I had the same car with the crappy y7. I converted mine to vtec. You should throw the y8 head on there and wire up vtec and convert the car to obd1. Makes the car run way better
+Brandon aka DeadShot I have definitely thought about it maybe someday
Well I just totaled my ek and I have a good engine with the vtec head I am currently dismantling if your interested in the head I'll sell it to you cheap
still got that? ill buy it
loose the y8 intake mani and password jdm intake tube. the z6 intake mani and a 2.5 tube with velocity stack, both of these have been dyno proven to make more power then the later.
richardhstratton I tryed to run z6 with extra ratorator line and no ports in bottom for two lines. How did you hook it up?
Photos would be nice
What exhaust is that?
It’s a stock header and exhaust for a Y8. Hoping to upgrade soon
Refine Movement is it decatted? Sounds louder than stock
Oh yeah there is no cat and no muffler
Great video
awesome video man !!
+The_Caveman thanks !
Refine Movement your welcome man
Hi my question is my daily is auto but it's haves the big air box like yours would I need an automatic Y8 intake or would a 5speed y8 intake work fine and will it be all plug n play
jdm fatboy I believe it's just a different IACV location. You may have to adjust or buy new trans and throttle cables.
Question... I see you guys use a lot of PassweordJDM parts... have you tried getting sponsored by them? Just wondering how hard it is to get sponsored. But keep up the good work, love the Videos.
Yeah, they seem to have some good quality parts and for the right price. We've never approached them about any sponsorships, it's a good idea though. I don't know if I've ever seen them sponsor someone. I have no idea if it's difficult to get someone like them to sponsor but I'd imagine everyone hits them up about giving out "sponsored" aka free parts lol so yeah, I dunno. Doesn't hurt to ask though
how did you get it from reving so high mines stays at 3 to 4k
Use Toyota's Denso FICD and it will settle down the idle, dont forget about your IACV aswell, clean and settle it up. I did that to mine but when turning on the A/C it suddenly feels soo heavy
what song did you use at 7:40?
Can you just show us the wheels. The fact that we have to wait 4 weeks just to see wheels is boring. You upload once a week why wait so long to do everything .? No trying to be negative but seriously
chocolate05sti righttttt
Some people are unsatisfiable
may I recommend putting on some actual music during fast-forwarding parts instead of just the elevator music? kind of like what B Is For Build does. just a thought. nice vid.
+Dc2 There music doesn't to be any more "real" then ours, it just sounds like a different style. We all have to use copyright free music to be able to get revenue from TH-cam.
Refine Movement I didn't mean to come off as disrespectful. the content is good, I was just trying to give feedback
+Dc2 no worries man we appreciate it. Thanks for watching
You Guys Are Awsome 👌
+Trendy God thank you ! We appreciate friendly feedback! Thanks for watching!
No ecu remap needed?
😃 please ditch the harness bar 😃
+Miton Films I'll ditch when I get a roll bar
Notification SQUAAAAADDD
+Nick Ito yes!
+Nick Ito thanks for always watching!
Nick Ito how do I get notification squad for my vids? 😂
Refine Movement yeah broghe that Y8 intake manifold will be a screamer, mine still had stock headers and pulled real well. The a6 cam helps too.
The mech a nic idk man try getting viral once lol
فضح عرضها للسياره وبقلك بعرفش ليش صار صوت الفلتر عالي 🤦🏽♂️
That is a Z6 intake from the D16Z6, larger bellows, shorter throut, the Y8 has smaller bellows, and a larger throut
cooool men
Don't you get embarrassed driving such a raspy and loud Civic on the streets? I understand this is a track car, but throwing on a resonator should hurt flow that much, especially with such a low output car. Not bashing or anything, just suggesting
+Vincent Poon yeah it’s alittle embarrassing but it’s really only loud when I have wide open throttle. There is a resonator on the pipe just no cat and no muffler. To be honest the car is uncomfortable on the streets with the mods I have done. It’s a full on track car now which I am fine with as it feels amazing on track. I am have a Mazda3 I daily. Thanks for watching!
With all do respect poon is infact a PC hater just tell him to suck on Ds, and don't be mad poor I said it with all do respect