Huawei Y5 Prime 2018 [ DRA-LX3 ] FRP Unlock And Factory Reset Using UMTMTK TOOL

Unlocking the FRP (Factory Reset Protection) and performing a factory reset on the Huawei Y5 Prime 2018 (model DRA-LX3) can be achieved using the UMTMTK Tool. Here’s a step-by-step guide to help you through the process:
Requirements:
UMTMTK Tool: Ensure you have the latest version installed on your computer.
USB Cable: A compatible USB cable to connect your phone to the computer.
Huawei Y5 Prime 2018 (DRA-LX3): Ensure the device has sufficient battery charge (at least 50%).
Steps to Unlock FRP:
Install Necessary Drivers:
Download and install the required USB drivers for the Huawei Y5 Prime 2018 on your computer. This is crucial for the UMTMTK Tool to recognize your device.
Download UMTMTK Tool:
Ensure you have the latest version of the UMTMTK Tool downloaded and installed on your PC.
Connect Your Device:
Turn off your Huawei Y5 Prime 2018.
Connect your device to the computer using a USB cable while holding down the Volume Up button to enter Fastboot mode.
Open UMTMTK Tool:
Launch the UMTMTK Tool on your computer.
Select the Correct Options:
In the UMTMTK Tool interface, select the "MTK" tab.
Choose the "FRP" option.
Select "Huawei" from the list of brands.
Ensure "Auto Detect" is selected for the device model.
Start the FRP Unlock Process:
Click on the "Start" button in the UMTMTK Tool.
The tool will begin the FRP unlock process, which might take a few minutes.
Once the process is complete, you will see a confirmation message indicating that the FRP lock has been successfully removed.
Steps to Perform Factory Reset:
Boot into Recovery Mode:
Turn off your Huawei Y5 Prime 2018.
Press and hold the Volume Up button and the Power button simultaneously until the Huawei logo appears, then release both buttons. This will boot the device into Recovery Mode.
Navigate Recovery Menu:
In the Recovery Mode menu, use the Volume buttons to navigate and the Power button to select.
Factory Reset:
Select the “Wipe data/factory reset” option.
Confirm the selection by navigating to “Yes” and pressing the Power button.
Wait for the factory reset process to complete.
Reboot System:
After the factory reset is complete, select the “Reboot system now” option.
Your Huawei Y5 Prime 2018 should now be free of the FRP lock and reset to its factory settings. You can set up the device as new or restore data from a backup if available.
Important Notes:
Ensure that you have backed up any important data before performing a factory reset, as this process will erase all data on the device.
This guide is intended for educational purposes. Proceed with caution and ensure that you have the necessary technical expertise to perform these operations.
By following these steps, you should be able to successfully unlock the FRP and perform a factory reset on your Huawei Y5 Prime 2018 using the UMTMTK Tool.