LOL.. the bloopers are great. The intro is the tricky part :P Can you please make a video on what you have in your bag when you go riding enduro for couple of hours?
+Nir Hason glad you like it, I will try to include them more often. My new video will have some as well l, hope to upload today. I can make that backpack video. Thanks for suggestion.
Well I’m a little late cause I was building a shed with my dad all day but of course I made it. And as always great video very professional and helpful and great ideas.
I just bought a quad with no spark, I got a voltmeter and checked the stator, voltage and resistance, and it was in range of factory specs. I checked the coil, rectifier, wires, cdi and crank shaft sensor and still nothing. I called my local mechanic for advice and he said to change stators, so I didn't and I got spark. What I'm saying is, sometimes voltmeters read electronic components and it says they are good and they aren't. Or I just didn't test the stator right lol
I came across your channel and really love the videos. I'm just getting into the dirt bike lifestyle, and I wanted to kn what are some of the differences between 2 and 4 strokes and if one is better than the other?
they are different, there is no way to say which one is better its purely by the preference of the rider. I like and own both. 2 stroke has raw power, snappy and bit violent gets less gas mileage and you need to mix oil and fuel, but its lighter and feels way lighter due to simple engine design with less rotating mass. cheaper maintenance, I like it on the trails 4 stroke has more linear power, little easier to ride, gets better gas mileage and if you have fuel injection you dont need to worry about jetting. Has engine break, feels heavier .. if it breaks its more expensive to fix since there are more parts to replace.. hope that helps
+Jake Robbins I use shell rotella 15w 40 for all my bikes. I use heavy duty diesel oil for my bikes with great results. I think 10w40 is better. I would use conventional, synthetic can cause your clutch to slip.
Dirt N Iron 15w 40 doesn't meet the recommended viscosity my manuals gives me. So I'm trying to find a rotella that whould work. Could I use t5 in my engine oil side? (My bike has separate oil chambers)
+Like A Boss65 I got some GoPro riding video on the channel, both from the track and from the trails ok 2 stroke and 4 stroke. Have you seen them ? You can find them in "seat time" playlist on channel page.
Should definitely include a spoke wrench in this video, it's important to check spokes, especially on new rims.
yea, thats right! thanks for suggestion
I love the bloopers. Can you put them in every video?
Thanks Henrik, I think I will do it more often, I wanted to see what would be the feedback from you guys.
also enjoy working on my bikes, tried changing tires last year, will do my own from now on
cool! its fun to work on your bike, you get to appreciate the riding more ;)
You forgot beer
lol
Good stuff mate your keeping me motovated….
+broken sprocket cool bro!
Thanks, I am more motovated now.
i saw the temecula motorsports sticker, i had no idea you lived around here 🤯
haha, yea.. I am right here in Socal. Where you live?
LOL.. the bloopers are great. The intro is the tricky part :P
Can you please make a video on what you have in your bag when you go riding enduro for couple of hours?
+Nir Hason glad you like it, I will try to include them more often. My new video will have some as well l, hope to upload today.
I can make that backpack video. Thanks for suggestion.
Hey man, love your videos, I’ve just bought my first bike and your videos answer a lot of my questions. Cheers
thanks man, I am glad the videos help
Well I’m a little late cause I was building a shed with my dad all day but of course I made it. And as always great video very professional and helpful and great ideas.
thanks dude!
The bloopers tho! 😂😂
+Dan Davies glad you like it! :)
Love your videos!!!!
thanks bro!
Usefull video. Cheers from France
Thanks Johan, Cheers!
I just bought a quad with no spark, I got a voltmeter and checked the stator, voltage and resistance, and it was in range of factory specs. I checked the coil, rectifier, wires, cdi and crank shaft sensor and still nothing. I called my local mechanic for advice and he said to change stators, so I didn't and I got spark. What I'm saying is, sometimes voltmeters read electronic components and it says they are good and they aren't. Or I just didn't test the stator right lol
Great channel. Subscribed!!
+Mr Honda cool bro, welcome on board!
I am sooooo obsessed with dirt bikes but they are too expensive to pay for one in the Solomon islands.
Very helpful thanks
i am glad it helps, thanks for sharing!
Can you make a video on tools to take with you on trail ride. Always great video's thanks.
sure Scott, I can make that. Thanks for suggestion!
bloopers are gold hahahaha
glad you like it Adam ;)
I came across your channel and really love the videos. I'm just getting into the dirt bike lifestyle, and I wanted to kn what are some of the differences between 2 and 4 strokes and if one is better than the other?
they are different, there is no way to say which one is better its purely by the preference of the rider. I like and own both.
2 stroke has raw power, snappy and bit violent gets less gas mileage and you need to mix oil and fuel, but its lighter and feels way lighter due to simple engine design with less rotating mass. cheaper maintenance, I like it on the trails
4 stroke has more linear power, little easier to ride, gets better gas mileage and if you have fuel injection you dont need to worry about jetting. Has engine break, feels heavier .. if it breaks its more expensive to fix since there are more parts to replace..
hope that helps
Dirt N Iron This does help thx for the feed back.
Wouldnt go putting red thread lock on your bolts. Check the manual for which strength thread lock to use if at all.
+nitemunky76 yea, you are right, blue one is better. Thanks for pointing that out.
What pressure should i run. I do trails and track
around 10psi is pretty safe i think
My tool box only has has vise grips in it
get one more pair, in case you loose them ;)
What is that metal rack you have?
I got it somewhere in garage sale years ago.. not sure where is it from
What size of torque wrench would I need for my 2008 rmz 250? Or is any size ok?
any size is ok as long as you can set it for all the values you need. small to mid size would be fine
Is this the same for pitbikes?
yea I think so
On a 06 Kx 250f. Is there such thing as a transmission oil change? Or is it just a motor oil change?
usually there is only engine oil that would be for both, engine and transmission.. some bikes can have 2 oils but its rare..
Okay makes sense that's what I thought but I wanted to be sure thank you very much, would pennzoil work? I used 10w-40
i think its ok
What torque wrench do you use?
craftsman, i got it at Sears
PLEASE HELP!!Can I use shell rotella T5 10w 40 or 10w 30 in my Crf150r.
+Jake Robbins I use shell rotella 15w 40 for all my bikes. I use heavy duty diesel oil for my bikes with great results. I think 10w40 is better. I would use conventional, synthetic can cause your clutch to slip.
Dirt N Iron 15w 40 doesn't meet the recommended viscosity my manuals gives me. So I'm trying to find a rotella that whould work. Could I use t5 in my engine oil side? (My bike has separate oil chambers)
+Jake Robbins yes I think so
Jake Robbins I put SAE 15 40 rotella triple protection
Lob the videos, I think it'd be cool if you strap on a GoPro and make some riding videos I would enjoy them
Love the videos**
+Like A Boss65 I got some GoPro riding video on the channel, both from the track and from the trails ok 2 stroke and 4 stroke. Have you seen them ? You can find them in "seat time" playlist on channel page.
what is the name for the tool to remove the stator?
flywheel puller for dirt bike
and it works for all the bikes?
what is the size of the puller for a yz?
i think they work for most of the bikes, you can get it from rockymountainatvmc and set your bike in the description
thank you Rado, cheers from Portugal
First Comment - Hi dirt N iron
hi ;)
Keep up the good videos, they are enjoyable to watch and help a lot with dirt bikes
thanks bro, I will do my best!
You forgot the hammer...
Wow I never realised how much of a tool snob I am...lol
:)
What do you mean "metric And standard" :'D
He'll yeah stay moto-vated
thanks bro!
The measuring cup thing was kinda sexist
I’ll subscribe when you start saying iron properly....
That might take some time ;)