Smiths Tachometer Modified Arduino

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ส.ค. 2015
  • Smiths Tachometer meter movement fitted with a Speedometer face for an MGB V8 Conversion.
    2 Arduino´s - one Converts CAN bus information from the Emerald K6 ECU and sends it to this display Arduino.
    Displays:
    Odometer
    Trip
    Speed
    Oil Temperature
    Oil Pressure
    Water Temperature
    Outside Temperature
    Inlet Temperature
    ECU Voltage
    AFR
    RPM
    MAP Pressure
    Barometer
    Throttle Position
    Ignition Dwell
    Ignition Advance
    Injector Duration
    Selected ECU MAP
    0-60 Timer
  • ยานยนต์และพาหนะ

ความคิดเห็น • 10

  • @ronwalsh
    @ronwalsh 7 ปีที่แล้ว +1

    That is an awesome upgrade. My 65 MGB gauges need this conversion!

  • @trewjohn2001
    @trewjohn2001  8 ปีที่แล้ว

    Hi - thanks - it's a Smiths gauge from an MGB. It's actually a tachometer with a speedo face on it.

  • @JCKCPA
    @JCKCPA 6 ปีที่แล้ว

    Will this work for a Triumph Spitfire?

  • @ericfoertsch1161
    @ericfoertsch1161 7 ปีที่แล้ว

    Anything you can share on the design , interfaces, code, and mechanicals would be appreciated.. this looks awesome .. building similar on my 59 AH Bugeye

    • @trewjohn2001
      @trewjohn2001  7 ปีที่แล้ว

      Hi Eric, you can download the sketches here.
      www.dropbox.com/sh/b2eczse7yxtlrox/AAAt-pC2Em6hA8COKdOyzWfxa?dl=0

  • @Grandremone
    @Grandremone 8 ปีที่แล้ว

    What kind of meter is that? Nice work!

  • @erichartz
    @erichartz 7 ปีที่แล้ว

    Hello John,
    How did you smooth out you stepper?
    Look awesome.

    • @trewjohn2001
      @trewjohn2001  7 ปีที่แล้ว +1

      Hi Eric, I don't use stepper motors anymore. It's a tachometer moving coil needle underneath a speedometer face. I drive it using the PWM outputs.
      Cheers
      John

  • @thghho
    @thghho 5 ปีที่แล้ว

    Hello Sir,
    Do you know any ready-made or DIY device available in the market, which can detect a running Engine’s RPM (via non-contact method or via Crankshaft sensor) and then via “CAN protocol output” pass-on this RPM value to any of following DC Controller (to control DC Motor’s RPM)?
    1. www.nocoev.com/product/curtis/manual/1229%20(15B).pdf
    2. www.nocoev.com/product/curtis/manual/1244%20(13E).pdf
    3. OR Any other 200+ Amp DC Motor SPEED & TORQUE Controller (which you will recommend)
    Please do let me know if you have any appropriate device?
    Thanks!