Im FBO stage 2 w/the BM3 lpfp ethanol sensor and was thinking of doing the same thing, dorch hpfp + stage 2 pure turbo, I was also thinking of going with port injection to help fuel things properly
Pure Stage 2 Turbo for the N55 is rated for about 550hp. The highest I’ve seen WHP wise I think is 568 on the N55 platform. Your friend and I have nearly identical setups and on my high boost pump 93 on e20 I’ll be close to 500 on my 535i on a semi conservative tune. When I’m on an E50 tune maybe closer to 530 or so as I’m not on a super aggressive tune. Low Boost I’m somewhere in the 4’s for sure and side by side my friends M4 Don’t believe with the I drive says in regards to HP, it’s not accurate by any means. But his setup is an M3/M4 Killer. My 535i plays with Hurrican’s on high boost with fuel cut issues so I can believe that. Regardless nice build. I’ll be in those ATL streets again soon.
@@6ixN54 Upgraded pistons don’t add HP, but allows to make bigger power safer, or lowering compression ratio for building more boost safely. As for upgraded rod bearings/bolts , it’s a good preventative measure when making higher power with the added strength but that doesn’t add power either. I’d love to run him one day.
Hey bro how much torque are you making? I know with upgraded turbos it changes the whole car, but the thing I love about the N55 is that it’s “low hp” makes up for it because of the insane amount of tq it gets it’s really a drivers car.
Yeah he's running a custom tune, I believe at the time of this video he had custom tune through bm3 with the guy who does custom tunes i forget his name
glad to see that the bloods and the crips are getting along and bonding over common interests such as cars
Lol Wat?
@@6ixN54 yall had red and blue colors on in the car lmao 🤣
Im FBO stage 2 w/the BM3 lpfp ethanol sensor and was thinking of doing the same thing, dorch hpfp + stage 2 pure turbo, I was also thinking of going with port injection to help fuel things properly
I here you on the engine work but any transmission or suspension work or drive shaft or axle shaft upgrades ?
Sounds mental in that cabin 🚀🚀
IKR!!
when someone starts holding on to the interior on normal driving you know the car fast asf 😂
Sic, yo. Bimmerheads all day🙌🏽✌🏽
Yessirrr
Pure Stage 2 Turbo for the N55 is rated for about 550hp. The highest I’ve seen WHP wise I think is 568 on the N55 platform.
Your friend and I have nearly identical setups and on my high boost pump 93 on e20 I’ll be close to 500 on my 535i on a semi conservative tune.
When I’m on an E50 tune maybe closer to 530 or so as I’m not on a super aggressive tune.
Low Boost I’m somewhere in the 4’s for sure and side by side my friends M4
Don’t believe with the I drive says in regards to HP, it’s not accurate by any means.
But his setup is an M3/M4 Killer.
My 535i plays with Hurrican’s on high boost with fuel cut issues so I can believe that.
Regardless nice build. I’ll be in those ATL streets again soon.
Good points bro good looks.💯 BTW Will's motor is partially built with upgraded pistons and rod bearings as well
@@6ixN54 Upgraded pistons don’t add HP, but allows to make bigger power safer, or lowering compression ratio for building more boost safely. As for upgraded rod bearings/bolts , it’s a good preventative measure when making higher power with the added strength but that doesn’t add power either.
I’d love to run him one day.
There’s a new gen 2 N55 pure stage 2 turbo that recently came out (Pure 750) it’s good for around 500 whp 93oct / 700 whp e85
People be on the full cap with the n55 builds
Hey bro how much torque are you making? I know with upgraded turbos it changes the whole car, but the thing I love about the N55 is that it’s “low hp” makes up for it because of the insane amount of tq it gets it’s really a drivers car.
Nice car 🔥🔥🔥
Did you have to put a custom tune after installing the stage 2 turbos
Yeah he's running a custom tune, I believe at the time of this video he had custom tune through bm3 with the guy who does custom tunes i forget his name
Cary jordan E85 custom tune
my dad has a bmw 435i m performance and it’s stage 3 it’s dumb fast
Everytime he guns it he flips it back. Lemme see that speed climbing.
What are those rims/wheels? (437m?)
What is exactly done to the car to get that much hp I’m getting one nd I wanna do the same fhign
Bolt ons, turbo, fueling, rod bearings, tuning, etc.
@@6ixN54how much was rod and bearings to do
@@geo745don Rod bearing kits going for like $600-$1200 on FCP Euro and u looking at over a band for labor, its not a cheap job i dont think
@@6ixN54 thanks for info, did you do Bearings yours or a Shop, do you have the car still
How was bro watching TH-cam or having video playing on the screen?
Where did he get them blue lights at that's near ur feet I'm looking for some in my car but the car is nice
Amazon most likely
lol we got the same hoodie on
I swear my plug live in those apartments gang😂😂
😂😂 We all gotta have 1 some where lmaooo
What radio he have in?
harmon kardon
literally wont gap my local m4 lol
Lol tell em pull up!
Okay but what's the numbers? 0-60? 60-130?
We'll get some Dragys on video and upload, i honestly don't know brother
@@6ixN54did u ever dragy it?
Slow
what year?
2016 i believe
Bro 600 ist too much a litel bit pls 😅
built motor?
Partially
It can’t even break traction on all seasons 😂😂 600hp pffft
LOL trust me the rear end gets loose
Not making 600 hp
Why not
@@6ixN54 cus he said so
@@NoGays13 Yall boys Silly🤣Tell buddy bring his N55 out n see
All respect he did say mid 5’s to low 6 prolly 550
Says not making but gives no explanation = doesn’t know !
Damm nice what’s his instagram
@m435idollarbill