How to test the soil for Interlocking Bricks (CSEB)
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- How to test the soil for Interlocking Bricks
-Testing and knowing the composition of the soil is very important to produce strong Interlocking Bricks. In a soil-sand-cement mix a minimum of 60-65% sand and gravel must be used to produce strong Interlocking Bricks. This video will teach you how to test the soil so that you can produce strong bricks!
A few questions for you:
* Can limestone dust be used in the CSEB? If so, what is substituted, and what quantity?
* Is it better to batch by volume or dry weight?
* Is 1.6 mm to 5 mm gravel acceptable to be used in the CSEB?
* Can off white cement and white cement be used in place of portland cement?
* Can the CSEB be made with the straight products - gravel, sand, clay and cement?
* Can hydrated lime be used in place of portland cement? If so, what is the substitution ratio? Reason being that some people have allergic reactions to cement.
If you are able to answer these questions for me, please, this would be appreciated.
Aap ne eya tropic greite khan sir k jeyse somjaya he ... Thanks. ❤
Very informative, thanks.
Thanks
Explain the raw materials used in brick and their ratio.
And brick dimensions all sides.
You measured twice. The first is the height of the soil in the Jar, while the other distance is the height of is the elevation of the sand after pouring away the water many times.
Is the proportion of sand in the mixture the quotient of the ratio of the two measurements?
That is all covered in the training
What is the ratio of cement, sand and soil for making the best brick?
Can we use stone dust instead of soil?If so what will be the ratio of sand and the stonedust?
yes you can, usually the ratio is 7:1 for stonedust: cement. we dont add sand
Welcome
What is the proportion of water with the mixture?
How much the maximum approx. compressive strength can be get with this ratio you mention. (i.e. 10%) Cement.
Usually we get over 4 MPa. But with the same cement content, we have better results like 8-10 Mpa as well. The cement is just one part of it, it all depends on the mix and how well the compression is made in the machine
What one bag means by weight or volume?
50 kg standard size bag
Quá tuyệt . Tôi là người việt nam tôi rất thích gạch này,🇻🇳🇻🇳
Good information
I used silt laterite soil with only 10 percent of cement without additional soil. And I managed to have a brick with 9.7 mpa. And soaked in water for a week . Does it show that adding soil is not necessary in my own case.
Hey Amara, 9.7 MPa is no doubt a very good strength and the mix is the main factor for the strength of the bricks. It has to be pointed out that there are other things like how hard the compression was and how did you mix the mixture (manually or with a PAN mixer) that will determine the strength of the bricks.
Off course silt as you mentioned will give additional strength to the bricks.
@@BuildupNepal manually mixed. No sand just laterite soil with 10 percent cement by weight. And with 5 percent I achieved 4.7mpa.
@@terresahel235 Hey Amara, It is off-course great. Do you mind sharing your results in detail with us
info@buildupnepal.com
pratik@buildupnepal.com
@@terresahel235 bro what was your compression force during production?(the pressure applied by your machine )
@@wenanyaugustine3311 it's manually pressed machine without pressure guage, but nevertheless our bricks where very strong
Dose it needs burn in oven?
Shall v use lime instead of cement,if ok then pls make video
It has been done in the past but we are working with traditional ways of cement. You can look at the auroville website who are leaders in the research for this kind of technology
hello dear. What if the percentage of sand is over 70%, how can we mix the material? Thank you for the answer🙏
नमस्कार, हाम्रो अफिस ललितपुर जिल्ला , चाकुपाट - पाटनढोका नजिकै छ, यदि हजुर अफिस भिजिट को लाहि जाान खोज्दै हुनुहुन्छ भने वा थप जानकारि को लागि 015261003, 9801136092, 9802070082 लाई सम्पर्क गर्नु सक्नु हुनेछ, साथै यो नम्बर मा Viber, Whatsapp Imo मा पनि कुरा गर्न सक्नु हुन्छ ।.
Can i start such busness as well.i have no an idea at all.what i supose to do start this busness.?where can i get traning
"नमस्कार, इन्क्वायरी को लागि धन्यवाद,
बिल्ड अप नेपाल पाटन ढोका, चाकुपट, ललितपुर 9802070082, 01-5261003 & 9801136094"
what size seive to use?
Sir 2mm ra 10mm ko sieve use garxau. Pls call us at 9802070082 for more information. Thank you!
Only Red soil can used for cseb products any soil can be used for cseb products
you can use sandy soil. But please avoid soil with clay content of over 25%
Instead of sand we can add m sand
Hey
not sure what you mean? What is m sand?
@@BuildupNepal it's a rock crushed sand
@@sathyanarayana6521 Hey Sathya, Yes it can be rock crushed sand as well as we have abundant in Nepal but you can use the snad from the local river too
Can I just buy raw ingredients and make these blocks? If so what is the most cost effective materials to purchase and use? What percentage of each?
Hello
hajur vannus
Nepali ma please
th-cam.com/video/Zbx2EznNG8k/w-d-xo.html
Sir, pls check this video. it is in Nepali
Hello
What press force 17mpa ??
Hey Haydaer,
Please send us a message on +977 9801136093 (Viber and Whatsapp) and we will guide you further.