ฝัง
- เผยแพร่เมื่อ 14 ม.ค. 2025
- Hey Guy welcome back to the channel! In Today's episode we get the frame damaged razor on the frame rack with 3 wheels and get to work. We have all the parts in but the front bumper so we are super excited to the the suspension all back togther! Stay tuned!
Thanks for Watching!!
Don't forget to Subscribe to the Channel and Smash the Bell notification!
EMAIL: dannyTVteamYT@gmail.com
Follow me on INSTAGRAM: @DANNY.TV
/ danny.tv
#DannyTV #Razor #Frame #Work
Music Credits:
There It Is by ZAYFALL / zayfallmusic
Music promoted by Audio Library • There It Is - ZAYFALL ...
Everyone needs a Stan The Man! Much respect for Stan paving the path for you all to carry onward and upward!
Thank you I appreciate all the support and super grateful for @StsntheMan🤙
Keep up the good work it's amazing how only him having one arm it doesn't slow him down keep it up man 💪 u are going to be a inspiration to so many people
I'm doing the same thing right now with a 2020 and without a frame machine. Its hard work but better than 2k for a new frame section.
I've been a Polaris tech for 15 years. Please do yourself a favor and at the very least get the front frame 1024369-458. Polaris frames do not react well to being pulled and you don't want a failure in a 170hp SXS.
How much are those?
I gotta agree with the polaris tech. I own the exact same model, color, sans the carnage. Given the extreme pressures these machines see on the trail, no way I would trust a repaired frame. Fortunately, you can buy the front 1/2 of the frame and repair it properly. Shame to waste all that time and money to have it fail on you and have to do the work again. But kudos on your determination guys.
I would replace it as well ,it would be a shame to see it break at high speeds
@@PeeterPuncher Retail for $1,800ish
Well I did auto body frame and collision repair for more years than that. Worked with similar frame machines as seen here. I can tell you there is as much or more risk of failure in cutting out and replacing frame sections. Cold straightening frame sections by experienced operators with proper frame equipment is as good and often better.
Great video boys, and good progress on the Razor! Hard work is paying off for you. Congrats on reaching 20k ! Wish you boys lots of success. Hope your channel keeps growing ! Always look forward to watching your progress on the builds.
Thank you! The support from you guys has been AMAZING! Will be launching some merch soon and you are the first to get some free merch for all the support🤙
Great video Danny! You always amaze me at the amount of knowledge you have to fix anything within your reach. Keep up the good work! 👍😎👍
Thank you I appreciate all the support and feedback brother!🤙
Ive drove this rzr. My ex wife owned it. Her and her husband. I was there right after the wreck. Glad to see its getting fixed. Was a super nice rzr.
That thing is going to be fun as hell to drive.
Got some cool riding adventures plained! Thanks for Watching!
Liking your videos, i am learning a lot! Way to go after it! 👍🏻👍🏻👍🏻
Pulling a frame so it looks straight is one thing but are you getting good measurements from set points on the frame so it's absolutely correct and in tolerance? I'm just asking as I was a plumber by trade. That's what bothers me about frame damaged sxs. Does it have a clean title?
Appreciate your work guys ....
Greetings from INDIA 😎😎
How much did it cost to buy it from the auction?
No one and I repeat no can say they can’t do anything because if you can do it all one handed than they shouldn’t be doing anything at all. Keep the great work guys don’t stop.
Man yeah you guys got an awesome channel I subscribed keep up the hard work can’t wait to see the rzr running
Thank you I appreciate the feedback and support brother! Stay tuned I got some awesome riding videos coming here soon🤙
Awesome can’t wait!!!!
Roll bar definitely needs reinforcement & some extra bracing. I think the one on my old Polaris was made out of the same tubing as Walmart swing sets. New Can Am X3 cage seems a lot stouter.
Yeah I heard that too. The newer one a little bigger in size but still not like the Can Am!
DannyTV can am has bigger tubes but a weaker metal
That exhaust is killer sounding!
Custom armytrixs exhaust😂
Great job getting the razor on the frame machine ...
Thank you I appreciate the support and feedback!
Goonz been all jello and bought themselves a side by side, going to have to put them in their place someday soon!
youtuber weng Sheng sub i ..friend 🇸🇬from sg
no early money youtuber
About say same thing
Danny TV building a razor and now goonsquad comes up with a can am maverick sounds like a little friendly competition.
I’ve been wanting an RZR forever wish I could come up with the money for one.
Great job guys love the vid thanks again great to see these things are bulletproof just need a big hammer or a bigger hammer so from all here to all there Australia
That cleaned up nice👍👍👍👍👍😎
Pulling trekking popping and cracken 🤣😂
You and the Goonzquad boys are having too much fun!! Maybe a little competition once both are finished?
You Guyz do Awesome work🤓👍
Thanks brother I do appreciate the feedback and support🤙
What kind of build would you like to see next on the DTV channel?
yo danny how do you stay smiling all video. keep it up bro
Definitely do the wheels in Blue! Keep Crushing It Guys!
Thank you brother I appreciate the feedback and support!
Nice jobe good for man 👍👍👍👍💖💖💖
Wish you best♥️♥️
Thank you I appreciate the feedback and support🤙❤👌
Yes do a blue on the wheels.
Yes🤙
Nice project Danny!
Dude I used to build those frame straightener decks and now I build the lifts for a company called Rotary lift
Good job I appreciate the feedback and support! Thanks for Watching🤙
Yes Paint them blue
Hola. Me gustaría saber en que estádos viven ustedes?
How much pulling force does it take on a UTV frame?
Ha got that same jump box works but not much more then that
Awesome video and excellent content
I knew you'd got to replace the whole frame
U can roll them around pretty easy if u grab a wheel and turn
First keep up the good work Lads
Powder coat the bead locks blue
Good skills!
I knew that frame was gonna need to be replaced, but if its a toy your gonna keep then do whatever you want with it.
I saw this in my recomendation video's... Hell yea to you and your channel got a new sub..
Thank you I appreciate the feedback and support🤙
Thanks for Watching!
You guys need to show the welding job, Stan .
Stay tuned next episode! Thanks for Watching🤙
What is that yellow car to the side of the razer
It's my LS swapped RX7. Which is on the channel!
i replaced half a 2014 rzr 1000 frame cuz of a roll-over for a single piece that goes through the hood hole that was crooked a little bit your frame got alot of issue. blue is super fine for the beadlocks
how much did he spent on it total???????????????????/
hey give him a hand!
Yeeeees.
Thier are some compation between you and GONZQUOD 😂🖐️✌️.
Most dudes wear boots to work... Here in Tennessee we roll with Nike Sliders!! Socks are optional...
Man, as long as they don't have pink nail polish on !
Make sure you bleed the air from the cooling system. Bleeder is on top of engine,and is a pain in the balls to get too. Also the inter cooler takes a long time to purge the air.
Actually, I think there is a trick you can do. Just fill up the radiator with coolant once it's all connected as well as the reservoir like normal. Then raise the machine up into the air a little bit and then remove the radiator cap. Then start it up and let it run for about a minute and you should see bubbles coming out as you look. Then go ahead and put the cap back on and the air should be out of the coolant system. Take it for a ride to make sure it does not overheat and if it does not, then that confirms that all air is out of the system.
I watch all of your videos and I like how you put stuff back together how much did you pay for the razor
They never say
Thank you I appreciate the support brother! The winning bid was 8200$
@@joegilly1523 I replied to every comment asking how much it was on my first razor vid.... but I will do a price break down when I finish up the build. Thanks for Watching🤙
Yes paint it blue
Always bringing fire 🔥
So the Razor didn't behave the way you wanted and you just called Papa to hit him a few times!!!!!
Haha @StantheMan hooking it up🤙
Thumbs the hell outta this if ya'll want them to do a trophy truck build like he mentioned in the video
Yes🤙 Stay tuned!
I have to ask.
Were you and Goonzquad together in high school?
Because I can just imagine shop class.
Yes enough said😂
Holy shite how'd you lose your arm bro? I'm new btw. Poor soul I wish I could help you with that arm but all I can do right now is subscribe. God bless your heart man... Dude I feel so bad watching this video.
U should have bought a used or new front frame section
Stay tune for the next episode I'm replacing some of the frame!
@@DannyTV7 ok just saying I race rzrs just trying to save some head aches
You asking your brother for more straps ,I think your dad needed a bigger hammer GOOD VIDEO
Haha yeah that was funny. Thank you for the support!
What happend to his arm
And btw it is pronounced razor but spelled rzr
Definitely powder coat the rings matching blue
Yes sir! That's the game plan.
arm ???
??
That frame is gonna pop and crack on u if u keep it.
That older guy should NOT lean over that strap with pressure on it.....rookie mistakes
Paint the wheels blue
2x10 :)
Imagine only having one arm. Haha
Like for reall I wouldnt trust that front frame section
I do!....but I will be ripping it here soon🤙
The goonsquad really copies of of everyone, i have been giving them slack
But your build proves that they do not have any originality they copied off of you as well as other youtube channels. That is not good because we do not see any originality.
Belive me i am not a hater i would not like to see all the youtubers doing the same thing.
Keep up the great work Danny!
You know these guys are all friends and know each other? Maybe they just wanted to go ride ATV's with their friends and decided to buy one to ride together. Sick of seeing people say they copy people with absolutely zero facts to back it up. Danny y'all keep doing good work!
I have a front sub frame from a 2015 xp1000 message me if u think it might work for u. Sell it to u cheep.
Dude just buy a frame they’re not that expensive stop being cheap you’re going to get yourself hurt Or if your planing on selling it you’re going to get somebody else hurt
List for the 2 frames is $3,900 and they're currently unavailable. It's not something that is normally kept in stock.
troglodyte1969 eBay dude or market place come on I just looked they are available
@@matthewmilam286 I just did a quick lookup on our dealer network. I'd pass every time on used frames.
I'm dead :) you can fit a lot more hoes in this car with that fitment
Alright I gave it a chance but said Rzr wrong again lol why is the channel called DannyTV if I see you have a partner there. Its not fair to him if he’s doing all the work and helping. Think a better name that includes your partner. Dont be selfish
Interesting vehicle and good content, but I believe you have adopted the somewhat annoying speech patterns of vTuned who mimics Goonzquad's speech patterns. Relax, and speak normally. It will be nicer to listen to you.
I'm dead :) you can fit a lot more hoes in this car with that fitment
Lol that was a joke! Hoes need love too😂