DIY BAMBOO ROLLER BLIND

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 พ.ย. 2024

ความคิดเห็น • 11

  • @cindydesmet5699
    @cindydesmet5699 2 ปีที่แล้ว +3

    Great idea and video! Thanks for doing it!

  • @srinivasaraov232
    @srinivasaraov232 21 วันที่ผ่านมา

    If i use just a curtain cloth, two steel pipes, 4 (or 6 or8 ) eye screws for rolling 2 screws for hanging and 2(or3or4) ropes abd tie clips will it roll?
    Please let me know.
    Thanks for sharing your method.
    I loved the way you explained.
    Please replay i want to try

  • @fallenamber79
    @fallenamber79 2 ปีที่แล้ว +1

    Thank you for sharing.

  • @jennytaylor3324
    @jennytaylor3324 2 ปีที่แล้ว

    Thank you for a very useful tutorial. Lovely blind, btw.

  • @hijabdiaries1839
    @hijabdiaries1839 2 ปีที่แล้ว +1

    Great tutorial bruh!

  • @CucinaCasera
    @CucinaCasera 3 ปีที่แล้ว +1

    Perfect! I love it🥰

  • @royruther4895
    @royruther4895 ปีที่แล้ว

    I would have used wood instead of cardboard. Drilling a hole on each end of the pieces. Then use wood screws to sandwich the bamboo matt, possibly with some wood glue for extra hold. It would also allow the string to pull through easily. Don't get me wrong... the idea is solid already. Thank you

  • @abdullaishfaq3166
    @abdullaishfaq3166 3 ปีที่แล้ว +4

    What do we need the adhesive paper for? I think it's just an extra step that can be avoided
    Good idea btw

    • @Inspiredlivingwithrahila
      @Inspiredlivingwithrahila  3 ปีที่แล้ว +5

      It is actually an adhesive paper with frost effect and is used to block the view from outside since the bamboo blind is see through. 😊

  • @warner2566
    @warner2566 3 ปีที่แล้ว +1

    How did you install?

  • @GetMoreMellow
    @GetMoreMellow 2 ปีที่แล้ว +1

    System good, what I was looking for, but points for neatness, not so many, I think those ties, all together make it look ugly, you could have used small nuts and bolts and made those almost invisible. Drilling in those tiles not good, what about if you get fed up with your blind, you''ve ruined the tiles, you could have used a small flat piece of board that you could have fastened in the joints between the tiles, and attached the blinds to that piece of board. When fed up with blind, remove board, fill in the two holes with new tile joint filler, tiles as new. Quality of the actual bamboo doesn't look high. The system is a great idea though. Thanks.