They need to fix the information they put out. the cxx525.2 speaker on the back reads 100 rms yet the box reads 75 rms as well as the web page,. It also states in the box to go to the website for the technical sheet , but when you do it take to a audio build with completely different speakets. The speakers do sound nice in out yesterday bench but we are not sure about the technical data on them.
2014 Street Glide special I currently have a dsp150.4 cx250.2 (4) ch65.4s (2)8cmb8.s and switching to a bda1400.4 for the 8 in advan lids. So excited!!!!!!!!"CICADA" all the way
Typically 80hz is best for most applications....depending on the set up (only using these speakers...no.bag lids etc) we will tune them a bit lower 65-70hz....
Will these speakers not work in a 2007 street glide?! I’m wanting to order the CH65.2 and the CH69.2 but all the dealer I find are saying they only fit in the 2014+ street glide?!?!
Jeff.....the 2007 will fit the CHX525.2 - 5.25" Coax Horn (CH652 are too big to fit)......as for the 6x9, if you have bag lid kits already, the CH692 will fot in those bag lids.
@@GrantMcFatter I have speaker pods in my fairing with 6.5” speakers in them already. I know stock they come with 5.25” speakers but in case they don’t fit in my pods I ordered the factory support bracket along with a set of 5.25-6.5” speaker adapters
Are your lowers Harley or aftermarket? Did you also install the crossover in the lower fairing? Was there room for the crossover? When measuring the depth of my aftermarket lowers, I'm getting about 72mm-74mm of depth to the speaker mounting surface with a dial caliper and they say they are 76mm in depth. @@timnevitt2993
Nice shout out to Carlos Ramirez and NVSAUDIO!❤
Nvs audio uses mostly sound digital amplifiers
He needs to interview Carlos!👊😎
Go to his shop he does alot of these amps as well on comp bikes.
They need to fix the information they put out.
the cxx525.2 speaker on the back reads 100 rms yet the box reads 75 rms as well as the web page,. It also states in the box to go to the website for the technical sheet , but when you do it take to a audio build with completely different speakets.
The speakers do sound nice in out yesterday bench but we are not sure about the technical data on them.
2014 Street Glide special
I currently have a dsp150.4 cx250.2 (4) ch65.4s (2)8cmb8.s and switching to a bda1400.4 for the 8 in advan lids. So excited!!!!!!!!"CICADA" all the way
What's the recommended high pass crossover for ch65 speaker if going to 300 rms power
Typically 80hz is best for most applications....depending on the set up (only using these speakers...no.bag lids etc) we will tune them a bit lower 65-70hz....
proudly a dealer since they got started @starved rock harley davidson
that where i bought my road glide st
Love all my cicada can’t wait for the 3500 and 5000 amp to come out. I been sell a ton of them. It’s hard to come them in stock.
When will the bigger amps coming out.
Will these speakers not work in a 2007 street glide?! I’m wanting to order the CH65.2 and the CH69.2 but all the dealer I find are saying they only fit in the 2014+ street glide?!?!
Jeff.....the 2007 will fit the CHX525.2 - 5.25" Coax Horn (CH652 are too big to fit)......as for the 6x9, if you have bag lid kits already, the CH692 will fot in those bag lids.
@@GrantMcFatter I have speaker pods in my fairing with 6.5” speakers in them already. I know stock they come with 5.25” speakers but in case they don’t fit in my pods I ordered the factory support bracket along with a set of 5.25-6.5” speaker adapters
You can get 5.25 x 6.5 adapters and should fit ch65 in street glide fairing
i have 6.5 horns in the lowers of my rg st loud and clear as hell but thats what u need when cruising down the highway at 85
Did you need to modify your lowers to fit the speakers?
@@JobJohnson-r9k had to take a dremel a made the hole a little bigger
Are your lowers Harley or aftermarket? Did you also install the crossover in the lower fairing? Was there room for the crossover?
When measuring the depth of my aftermarket lowers, I'm getting about 72mm-74mm of depth to the speaker mounting surface with a dial caliper and they say they are 76mm in depth. @@timnevitt2993
👍🏽👍🏽
All 2014 and up models have good selections older models 2013 get a plug play speaker budget friendly system 🙄. What a shame.
Sounds like not much for 13 down. Sucks. Good video though.
We have the new CHX5252 PRO coaxials for 98-2013 bikes...our 6x9 speakers are also able to retro fit in other brands lid kits...
@@GrantMcFatter-qt5cz 5252’s fit in tour pack? I’d like 6.5’s in lowers and fairings.. if possible