How Turbine Oil system work ? AOP PUMP, ACOP , MOP, EOP , JOP pump | LUBRICATION System in Hindi
ฝัง
- เผยแพร่เมื่อ 14 พ.ค. 2021
- Lube and seal oil systems, and steam and process gas piping require a thorough cleaning before a new machinery train can be commissioned. Cleaning seal and lube oil systems is also often required during a machinery turnaround. In practice, however, cleaning these systems rarely gets the attention deserved. The reasons are multiple; following are some typical stories:
•
The process department claims that the process gas piping is already clean because it was flushed. Translation: “Someone dumped the water after the hydrostatic test!”
•
Blowing steam lines is left to the process personnel without any practical engineering guidance. As a result, the lines are blown for long periods or until the noise cannot be tolerated any longer. Targets are not installed, flow rates are inadequate, and flow meter orifices left in the line are damaged; yet no one is certain that the lines are really free of damaging debris.
•
Cleaning lube and seal oil lines proceeds for days, but the gauze pads still remain full of metallic particles. Shortcuts are then taken when the project schedule is jeopardized.
•
Small but crucial lines are forgotten. Buffer gas supply lines and balance lines are often ignored. Yet these lines feed gas that must flow through restricted passages or through labyrinth seals. Small metal shavings or weld slag left over from piping fabrication can cause considerable damage when caught between rotating and stationary parts.
BAHUT ASSA GURU JI PRANAM 🙏🙏
Very informative, praisable videos collection.
Welcome, please share with others, and do not forget to subscribe to the channel
Very practical video, keep up the work!
Thanks, brother.
Sir mai terbine pr he kam kr rha hu to mai kuch information search kr rha tha or apka video mil gya mere liye useful h bahut
Ok
Good Sir
Thanks
Thanks sir🙏🙏
Welcome, brother, please share with others.
Axial type compressor blower ka explanation with actual equipment . Jo blast furnace me use hota hai....,???
Good sir ..
Thanks and welcome
❤❤❤❤❤❤❤❤
Turbine Rolling bareme bataya sir
the bigger line that is not control oil line. That is lube oil return line. On the bottom left two header line can be seen that is control oil lines. Small one is supply of control pil and bigger one is return of control oil. Rest all of the lines are lube oils
Ok
Combined Cycles power plant Completed process with Equipment use ,Please make Video on this Sir.
Which type pump use -AOP,MOP,EOP
Well done sir,
Kindly make the video on load cell used in industries.
Ok, sure!
Sir u have made very good video about LOP.
But can you make a video on why heater are used or why RTD's are used.
and a little more about panel working. Thank you.
We will try
Coling tawar ka temperature kitna hota hai
Eska capsety kitna hota jo
Bro control oil ki pipes patli hoti hai
Lube Oil Purifier is not attached with turbine?
😍
Thanks, please share with others
Coling tawar ka kam kya hai
Mcw ka kam kya hai
City fan ka kya kam hai
Ph boiler or aqc boiler per video banaye
Ok, I will try
Turbine ka Safety interlocking and process interlocking ka seperate vedio bna Dena please sir
ok, thanks, please don not forget to subscribe our channel and don to forget to share with your friends in social media platforms.
Sir agar cantrol oil pressure bad jayega tho kya hoga
Relief valve is there to maintain the pressure
Over had tank ka function bataiye
To give oil for more time, even when the pump is not running
Sir shinko steam turbine c o p t esvassembling and maintenance ke video bnia
Ok
running turbine pe agar lub oil pressure kam ho jaye to kese badhaye
For that, there is a standby the pump is there when the pressure is down, another pump will start automatically. Otherwise, there is nothing to do. increasr the pressure.
What is difference between auxiliary oilpump and main oilpump???
Thanks, if you like the video the video , do not forget to like the video and subcribe channel. if you ahave alredy done, please ignore this!
Sir lubi oil pressure and temperature
Ok
Sir g DTS ka kia Kam hota ha.. DTS me har spear part ka name ke video Snd krty
Thanks, please share with others and don't forget to subscribe to the channel.
Condesar ka kam ka hai
Sir g bop me part ka name or use
Ok
Sir why Aop and mop needed??
Thanks, if you like the video the video , do not forget to like the video and subcribe channel. if you ahave alredy done, please ignore this!
Oil ko phle cool kyu krte h phle filter kyu nhi krte h sir
Cool Karen se jo particles hai co trap Ho jate hai filter me
I..men's..oil..thakness
Welcome