Modeling a FLOOR PLAN from an Image in Fusion 360! Fusion 360 for Architecture Part 2
ฝัง
- เผยแพร่เมื่อ 31 พ.ค. 2024
- In this video, learn how to import and calibrate an image to use as a reference for modeling a floor plan inside of Fusion 360! Then, we'll start modeling the walls and rough openings of our floor plan!
FUSION 360 FOR ARCHITECTURE PLAYLIST
• Modeling a HOUSE in Fu... - วิทยาศาสตร์และเทคโนโลยี
Hi everyone! Let me know what you think about this tutorial in the comment below!
Very helpful thankyou
Hey Justin, I've been following your videos these past few weeks to model my "dream house". You have been a tremendous help. I was wondering if you had any tips on how to sketch in a conversation pit within the model.
Thank you for what you do!
Hi Justin. I enjoyed the pace of your tutorial and your no gabbing style of teaching. One question (perhaps for a future video): I am an HO scale model railroader and plan on using Fusion 360 to design and model full size prototypical buildings on the Santa Fe. That means designing in 1:1 and then scaling the design down to 1:87. How would I go about accomplishing that?
i love it i wish to practice more as i am about to be employed as an architect but i dont have the software i cant afford it please help
This is my favorite Ernest movie!
For all four of us that understand your reference🤣
The clarity of your instructions and the patience as you take the time to show your movements. Just had to say thank you for a job Well Done. Outstanding tutorial, I learned TONS of information.
The reason I want to know that function! It's nothing else but a "police mobile armored vehicle"! I asked this question because I want to model with this program, make the parts in 1/72, 1/24, or 1/35 scale and print them out as parts with a 3D printer! 0:08
SUPER HELPFUL! I'll be continuing with your series of videos to complete my home reno project. Thanks! From Arlington, VA
Another great tutorial loved the trick of creating windows and doors I was doing it a long more time consuming hole way all the time . Love your tutorials
Thanks a lot. I see it is many different ways to do things, but I like your way. Easy and fast. Have a nice Saturday. Regards from Norway.
Thanks! Really helpful video for a new Fusion 360 user. Much appreciated!
Hey Justin I hope you are well. I just started using Fusion 360 and your videos have been a major help and I do plan to watch them all. I currently have most of my house including basement done. My question is in regards to the exterior landscape. My yard slopes down from the very back north east corner down towards the south west corner. Is there a way to adjust the 3d sketch so it shows and accommodates for the slope? I want to properly plan out several outdoor features such as a new enclosed deck, 4 seasons room, raised bed garden area, and a new shed. Thanks you so much for any help you can give on this as well as all of the help you have already been with these videos.
Absolutly great Tuts and easy to follow. Thank you so much from Germany.
Thanks! :)
Hi thanks for the series. Will there be more on this. Especially on the house modelling. Would like to do the interior as well . And maybe a walk around if it is possible.
Hi there, this tutorial helped me a lot! I do have one question though. Is it possible to set the measurements to show both feet and inches? It would be nice to be able to write 7' 4" rather than 7.333'.
Thanks again!
Thank you for your clear instructions and attention to detail, this video really helped me understand what to do
please share your software with me if thats possible... its too expensive
Great series, looking forward to more.
Thanks! :)
This video is helpful. I wish I could watch more like it.
Great video, thanks!
Great Video thank you! Is there a way to get more detailed exterior materials to add to the building? like siding or shingled or metal roofing? thank you again
Exactly what I need now! Subbed!
Thanks!
Very nice video, you make it look so easy
Great Tutorial THX!!!
Thanks
Thanks for the tutorial! One thing that I found is that it seems to be almost necessary to make each wall it's own body or component. If you end up doing detail work on the interior (for example adding window or door trim), it's really hard to get a good view of what you're doing unless you can just disappear (make invisible) walls that get in the way. Is that what others do, or am I not yet good enough with manipulating my point of view ?
Create an offset plane, press "S" and type "Section Analysis", use aforementioned plan as POV. :)
You can hide and unhide each section analysis instance.
I finally learned how to calibrate an image!
once I calibrate, I also use the calibrate tool to measure points on the reference image. Just esc instead then measure more points.
Would it be possible to create parametric windows and doors and and add them in after extruding the entire walls?
Scaling the image is a nice trick. I have used, draw a known line then make a box outside with one side the same. Then grab all and enlarge to the size I need. AKA an Aspire trick. I would like to get your input on the way I build my 3D puzzles.
A very usefull video. thanks a lot.
Having lots of fun learning with your videos, thank you!!
How do you create a edge for the windows and doors while also still creating a line? Im confused on that part.
Extremely useful
I loved it ! great and easy to follow as ever
it was exactly what i was looking for - thanks a lot
btw could you do a video where you create a layout plan in fusion as a 2D model?
I believe this will be on the list - I'm definitely going to show how to create a plan from the 3D model
Great video, thanks
Thank you!
Great THX!!!
Great job. I tried to import a photo. It came in distorted, and I could not use it. Please keep going with the house ones.
Hello, I seem to be able to see only on dimension of a rectangle when I try to edit a sketch? Can you tell me why that is?
Hey nice tutorial. How would you put a roof on it
Cool thank you
Glad you liked it :)
Hey, great and so soon👍👍👍
Lol - I wasn't kidding - it was on the list :)
Exciting intro
Great stuff. Thank you.
Thank you for taking your time to do this, I am new to this and already learned a lot from your tutorials!
Loved the windows and doors. I have never seen that trick.
Thanks. I've been using Fusion 360 to build mockups of the houses i'm looking at, and this has made it was easier.
Thank-you for illustrating this! I appreciate it!
Superb
Sir please make a video on piping or bath design
Hey, I love those tutorials in general... going to follow up on them and get some traction in Fusion :)
please help me get fusion 360 on my computer i cant afford it
You can't just use the personal version?
You've been in so many situations in this video your head must be spinning.
Video title is wrong - this is modelling a house from a floor plan image. You need to do a video about creating the floor plan from the model (like what we need to submit to council to get building approvals)
Great job. I tried to import a photo. It came in distorted, and I could not use it. Please keep going with the house ones.
Thanks