Great demonstration and explanations. Even though it was a 20 minute video, I was engaged the entire time. Your explanations were concise and not drawn out.
It's a smart way to add a filter pane, and I already used this trick in some of my previous Power BI reports. However, a filter pane per report page must be created, using bookmarks. It can be quite time-expensive when a report has several pages. Moreover, I noticed some slow performances. More recently I opted for a single filter page for the entire report, using a button with page navigation action and hiding synchronized filters in the report pages.
hello, wonderful style to get all slicers , thankyou for it, i had little issue hile applying this technique, i want same style filter pane on all my 6 page power bi dashboard. so do i need to add bookmarks for specifically all pages or 2 would be enough. as when i update one bookmark and then copy to another page then it redirects back to original page from where i copied. so how to tacke with it,
This is very beautifully done. However, what if we want the filter pan across multiple tabs? Would we need to copy on each tab and create a set of bookmarks for each tab?
Hi I created 2 bookmark show and hide like you and it’s work. But my X button I turned on the action and add bookmark hide. And The button to turn back I also add bookmark show but two button not work. Do you have any idea about it?
Thanks :) yes exactly that's what the bookmarks are for. You can preset some slicers and create a bookmark (make sure the Data is checked) and apply it to the visual. Whenever you navigate onto this bookmark, it will go to this sate of the slicers.
if you want to have your slicers in a specific selection when you open the report, you need to save the file in that state. The report always shows the state you saved the file in, when your efresh the page
Public announcment you mean when you publish the report? I'm also not sure what you are referring to by advanced filters pane. The default filter pane on the right side?
They do the same, closing the filter panel. It gives the user more than one option to close the filter panel to make it a bit faster. It's a common ui element and you can see it for example in the Windows popup dialogue windows too
@@yourownkpi you are right. Yet it doesn’t mean that is the best approach as Windows is not known for being user friendly. I would look at iOS as an example. Anyway that aside i love your videos and hope to learn more from you
When Close Button is press the Filter is cleared. The Filters should remain the same as selected by user but it clears the filters and closes. What's the solution?
Hi want your little help in power bi If i create matrix table Those matrix table columns have names of employees and also manager's name now when i publish report when employees see that report they should see only their name The manager's name should not appear when the manager see the report Then everyone's name should appear It possible to we can create such a button in Power Bi, when the manager presses that button, a panel of password will appear and after entering the password, a report of employees include with manager names will appear.
Are the employeee and manager names in the same column? In that case you can look into Row Level Security. With that you can filter the data and show different results diepending on which user opens the report. There is no need for password or anything, it happens automatically. th-cam.com/video/MxU_FYSSnYU/w-d-xo.html
@@yourownkpi Yes employee and manger name are in same column and 2nd column is score and manager don't want to see there scores to employees and manager want to hide score from other employees in matrix table but when publish dashboard manager open link then automatically manager see there own score but when employees open link automatically hide manager scores
How can I can do that in networkdays (without Saturday and Sunday and holiday days) : Column Discunted days New Column Result 24/06/2024 -3 dias = 19/06/2024
Part 2 is out :)
th-cam.com/video/G3GyllXAt14/w-d-xo.html
Great demonstration and explanations. Even though it was a 20 minute video, I was engaged the entire time. Your explanations were concise and not drawn out.
That's a great feedback, thanks! :)
Yea this was great , I love the clean look of your work as well
Thank you!
Thank you too!
It's a smart way to add a filter pane, and I already used this trick in some of my previous Power BI reports. However, a filter pane per report page must be created, using bookmarks. It can be quite time-expensive when a report has several pages. Moreover, I noticed some slow performances. More recently I opted for a single filter page for the entire report, using a button with page navigation action and hiding synchronized filters in the report pages.
Wow, congratulations! You've really created an incredible video. I can tell that it really held your attention the entire time
Thanks for the feedback :)
Just one word for this.. Perfect!! Thanks for this very useful demonstration. Waiting for the next part.
I appreciate it, thanks for watching :)
Keep up the good work. You've made the difference 👌👌
great video. Thanks for sharing your knowledge on the slicer panel. Super helpful
Very nice solution. It’s always a tricky balancing act between space for slicers and visual content.
Exactly
Great video, you saved my job sir! God bless you
Glad I could help :)
Good job! Very clear, professional, and on point!
hello, wonderful style to get all slicers , thankyou for it, i had little issue hile applying this technique, i want same style filter pane on all my 6 page power bi dashboard. so do i need to add bookmarks for specifically all pages or 2 would be enough.
as when i update one bookmark and then copy to another page then it redirects back to original page from where i copied.
so how to tacke with it,
This is very beautifully done. However, what if we want the filter pan across multiple tabs? Would we need to copy on each tab and create a set of bookmarks for each tab?
Thanks! Yes that is the case. You have to copy the visuals and create the bookmarks on the pages separately
What an excellent video. I have subscribed and I am looking forward to seeing how you do the counters for 'filters applied'
Thanks, I appreciate it :) it is coming by the end of this week or the next week.
Hi I created 2 bookmark show and hide like you and it’s work. But my X button I turned on the action and add bookmark hide. And The button to turn back I also add bookmark show but two button not work. Do you have any idea about it?
I needed it so much, thanks!
I did it before 3 years ago.. anyway good job 🎉
Can the slicer panel be replicated in all the sheets of the power bi report?
wow it's awesome, but just wondering if you can save the values of the slicers and later when you reload the report the values are still same?
Thanks :) yes exactly that's what the bookmarks are for. You can preset some slicers and create a bookmark (make sure the Data is checked) and apply it to the visual. Whenever you navigate onto this bookmark, it will go to this sate of the slicers.
@@yourownkpi yes I did that but when you refresh the report the slicers value got reset.
if you want to have your slicers in a specific selection when you open the report, you need to save the file in that state. The report always shows the state you saved the file in, when your efresh the page
Beautiful 👌🏽
What ruler software used for that alignment red lines?
Que buen tutorial doctor, un suscriptor más 🎉
Obrigado 😊
Great walkthrough! thank you!
You're welcome!
Very nice I will implement it in my current project
Great 👍
Great tutorial. Thank you for sharing
Thanks for watching!
is it possible to set the filter from the advanced filters pane in the same way, so that they are visible in the public announcement?
Public announcment you mean when you publish the report? I'm also not sure what you are referring to by advanced filters pane. The default filter pane on the right side?
@@yourownkpi Yes, public release of the report. In this case, the right eye of the filter is not visible.
Brilliant tutorial
This is great, thank you!
Awesome content. Thank you very much.
JUST Ultimate 👌👌
Wonderful video, thank you!
Muito bom! Good Work. I'm From Santos City.
Thanks 🤗 greetings from Berlin
Thank you! Awesome video 👌
Thank you, and clean data too
How to pass date parameter to direct query (dates should be taken forms slicer at specked value )
What is the meaning of the close button if you have the X icon and vice versa?
They do the same, closing the filter panel. It gives the user more than one option to close the filter panel to make it a bit faster. It's a common ui element and you can see it for example in the Windows popup dialogue windows too
@@yourownkpi you are right. Yet it doesn’t mean that is the best approach as Windows is not known for being user friendly. I would look at iOS as an example. Anyway that aside i love your videos and hope to learn more from you
I never owned any apple products but definitely going to look into it. Thanks :)
awesome! thanks for sharing!
Thanks for watching :)
Thank you so much.
great video!
thank you!!
You're welcome!
amazing, thanks!
waiting for the next part
Next part is out :)
th-cam.com/video/G3GyllXAt14/w-d-xo.html
When Close Button is press the Filter is cleared. The Filters should remain the same as selected by user but it clears the filters and closes. What's the solution?
You have to uncheck the 'Data' when setting up the bookmark to not affect the slicer selections
You can create another button and use bookmarks.
Nice video = new sub! 👍
Awesome thank you!
Hi want your little help in power bi
If i create matrix table Those matrix table columns have names of employees and also manager's name now when i publish report when employees see that report they should see only their name The manager's name should not appear when the manager see the report Then everyone's name should appear
It possible to we can create such a button in Power Bi, when the manager presses that button, a panel of password will appear and after entering the password, a report of employees include with manager names will appear.
Are the employeee and manager names in the same column? In that case you can look into Row Level Security. With that you can filter the data and show different results diepending on which user opens the report.
There is no need for password or anything, it happens automatically.
th-cam.com/video/MxU_FYSSnYU/w-d-xo.html
@@yourownkpi Yes employee and manger name are in same column and 2nd column is score and manager don't want to see there scores to employees and manager want to hide score from other employees in matrix table but when publish dashboard manager open link then automatically manager see there own score but when employees open link automatically hide manager scores
Great
Beautiful but I hope Microsoft implements a way to make this a faster process with fewer steps in the future.
Yes that would be cool haha
Awesome
Make a video on dax ❤
Thanks! Now Im focusing more on design and visualization videos but in the next parts of this filter pane series there will a lot of DAX :)
@@yourownkpi when slicer panel 2nd video release
Waiting 🙂
How can I can do that in networkdays (without Saturday and Sunday and holiday days) :
Column Discunted days New Column Result
24/06/2024 -3 dias = 19/06/2024
cool
My action doesn't work any idea
Solved it!!! Thanks for the video
How to make a Slicer pane?
? :D
increible
Nice. Thx!
Welcome!