RV Lock Replacement for cam and slam baggage door locks. Get rid of those CH751 and R001 keys!

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 พ.ย. 2024

ความคิดเห็น • 24

  •  2 ปีที่แล้ว

    This was excellent! Thank you for taking the time to share this information! Very helpful.

  • @lifeathand1062
    @lifeathand1062 2 ปีที่แล้ว

    i like replacing the thumb turn knobs on the hatches for added security from pry bar attacks

  • @tobyleach176
    @tobyleach176 4 ปีที่แล้ว

    Glad I found your video! I also have a 2020 311bhs. Now I know exactly what I need. Hopefully they can match the key on my electronic rvlock. Having 1 unique key would be ideal! Thanks for sharing!

  • @grumpy7724
    @grumpy7724 2 ปีที่แล้ว

    The slam latches on my trailer are so easy to pop open with a pocket knife, screwdriver, or coat hanger. If I don't have my keys and the latch is locked, I pop them open with my pocket knife and it takes the same amount of time as using a key. I am looking for a deadbolt type or a nice latch protector, kind of like what's used on some exterior building doors.

    • @Lunatic_88
      @Lunatic_88 2 ปีที่แล้ว

      Rv door lock has deadbolt

  • @atschram
    @atschram 3 ปีที่แล้ว

    Super helpful, Brother! Thanks for the video!

  • @rogerrossman5124
    @rogerrossman5124 3 ปีที่แล้ว +6

    Why would you put the gasket on the inside of the door. It should be on the outside so that water doesn't get inside the door.

    • @rvengineer2300
      @rvengineer2300  3 ปีที่แล้ว +1

      Roger, good point. I haven't seen this be an issue so far, but you point is well taken. I think you'd have to get a better gasket to put on the outside as the one included is paper thin.

    • @chriscollins5320
      @chriscollins5320 3 ปีที่แล้ว

      @@rvengineer2300 WILCO.

  • @hardtruth2039
    @hardtruth2039 4 ปีที่แล้ว

    Great video. I will be doing this soon. To much expensive gear to loose not to do this.

  • @lifeathand1062
    @lifeathand1062 2 ปีที่แล้ว

    i would add a new proven coupler lock set for the tongue makesure you get the medeco cylender

  • @ahetherington88
    @ahetherington88 3 ปีที่แล้ว

    Super helpful! One question: when you ordered the slam latch replacements, did you also have to buy the correct cylinder separately? Or did you specify in the comments when ordering which cylinder you needed? The website doesn't have the option to pick cylinders on the slam latch like they do with the cam locks.

    • @rvengineer2300
      @rvengineer2300  3 ปีที่แล้ว

      Thanks Alex.
      I just put it in the comments and it came with the correct cylinder already installed. You also get extra keys which is nice.

  • @andrewjanosik8779
    @andrewjanosik8779 3 ปีที่แล้ว

    Thanks for the video, this helps!

  • @notarycat
    @notarycat 3 ปีที่แล้ว +1

    Great video. But link doesn't work, website is non-existent.

  • @mikedietz8246
    @mikedietz8246 4 ปีที่แล้ว

    Quick question
    I have the reflection 31MB.
    I understood that there were probably only 10 key sets So I understand I have a one in 10 chance for someone having the same key. Would you want to rekey the door then the cabinets locks

    • @rvengineer2300
      @rvengineer2300  4 ปีที่แล้ว

      Mike,
      The entrance door on Grand Designs are the Global Link keys which currently run from G301-G390, so a 1/90 chance of having the same, assuming Grand Design is using the full range of combinations. I do not know if they only use a certain range of the Global Link system. Have you been told anything about what range they use?

    • @mikedietz8246
      @mikedietz8246 4 ปีที่แล้ว

      RVEngineer No not from Grand Design but from a salesman

  • @charlesmiller3134
    @charlesmiller3134 3 ปีที่แล้ว +1

    Can this replace the cam latch type?

    • @rvengineer2300
      @rvengineer2300  3 ปีที่แล้ว

      I replaced the cam latch on the outside kitchen as seen in the video w/ the Global Key cam lock. If your are asking about converting a cam style to slam style, that would be a much bigger project as you'd have to cut out the slam latch profile in the door and attach the receiver plate. It is possible, but you risk having to buy a new door if you mess up. I'd recommend only swapping Cam for Cam and Slam for Slam with this system.

  • @kennethcollins148
    @kennethcollins148 11 หลายเดือนก่อน

    How didvyou remove the rivets. You skipped the only reason I was watching

  • @bentrider
    @bentrider 3 ปีที่แล้ว

    Meh... like you said, if somebody really wants to get in, they will. So, I don't keep anything in my RV that I care if somebody stole.

  • @billyjones9045
    @billyjones9045 3 ปีที่แล้ว

    thives need more consiquences...get simcard motion act solar cameras and conceal licence