Thank you sir 🙏🙏🙏 aap ki wajah se may drawing exam pass hogaya hu . Bahut attempt karchuka tha par clear nahi ho raha tha aapke videos dekhne ke baad exam clear hogaya thank you so much sir 🙏🙏🙏🙏
Tq u sir I understand all concepts and problems in easiest way I was searching for this video's And i don't know Hindi but ur hindi made me to understand From Karnataka ❤️❤️❤️
A line AB, inclined at 40° to the VP, has its ends 50 mm and 20 mm above the HP. The length of its front view is 65 mm and its VT is 10 mm above the HP. Determine the true length of AB, its inclination with HP and its HT.
Thank you sooo much sir main Aaj exam deke aaya same isi type ka question aaya tha aapke bataye huye concept pr hmne bhut achha se exam Diya sara question ban gya thank you soo much sir❤
A line AB has its end A 15mm above HP and 10mm in front of the VP. The end B is 52mm above HP and the line is inclined at 30 degree to HP. The distance between the end projectors of the line is 50mm .Draw the projections of line and find its inclination with the VP. ........ Please understand it
Sir,May you hint how to solve this problem- The plan ab of a line makes an angle of 30 degree with xy, ab being 45 mm long. The point B is in the HP and point A is in the VP and 40 mm above the HP. Draw the projections of the line AB.
A line MN, 60 mm long, is in V.P. It makes an angle of 30° with the H.P. The end point M is 15 mm above H.P. Draw projections of line MN. Also measure Plan length of the line. , how to solve this question sir i tried and waste almost 3 hours i cant solve it
Sir apne previous video me kha tha ki true lenght ke point eak line me hote hai and eak line mai lane ke liye eak trick bhi batya tha and isme aap khe rhe hai ki true lenght eak line me ho ye jaruri nahi ??
appreciate your hard work sir!!
Right biro......
The best way to appreciate sir is by getting good result.
@@vanrajpardeshi7496 🔥💥
Ooooo.Stan ke Chouthe 14e
Thank you sir 🙏🙏🙏 aap ki wajah se may drawing exam pass hogaya hu . Bahut attempt karchuka tha par clear nahi ho raha tha aapke videos dekhne ke baad exam clear hogaya thank you so much sir 🙏🙏🙏🙏
Top View = 6.4 cm
alpha = 44 deg
beta = 52 deg
Theta = 30 deg
Phi = 44 deg
Top view ~60-61
Nice but ur TL is wrong
It is 70mm
Means 7cm
MY ANSWER TOP VIEW IS 6.7 CM .
Top view 63mm
Nice sir!!
Phi=45°
TOP VIEW= 60mm
Very good
Hi
Please share solution
@@indsar7989 sorry but solution to mene rough page me kiya 📄📜 aur woh abhi kaha kai pata nahi!!!?🥺🥺
Top view 70 mm hoga
Tikle sir rockss!!! He explains everything in much easier and understanding way. Thanks Alot sir!
Thank you sir
Most welcome 🙏
α=45°,
β=55°
Top view =60 and
Φ=40°
Please respond sir
H
@@EngineerDoEverything hello
5 ka value 50 hai
The best teacher I've seen ever in ed course
Sahii kaha ❤
Vry vry nice video sir its awsome
Thanks for watching.
@@TIKLESACADEMY wl cm sir
@@TIKLESACADEMYsir phi = 42 degrees and tv = 60 mm
Top View Length = 60 mm
Inclination with HP = 45 degree
Bro tv is 65
Yeah 60 is correct
inclination with vp
Top view= 61mm
Phi=45
Phi=44
TV=62mm
Guys sab like maro and subscribe Karo, this teacher deserves that!
Excellent sir!!!
Sir Engineering Drawing me dimensioning kaise ki jati h ,ye topic ek bar bata dijiyega sir....Thank you 🙏
👍
Awesome sir nice teacching talent and all rounder teacher👍👍
Thanks for watching
😊
Tq u sir I understand all concepts and problems
in easiest way I was searching for this video's
And i don't know Hindi but ur hindi made me to understand
From Karnataka ❤️❤️❤️
Sir aap accha padhate hai sab clear ho jata hai
best teacher !!!!!!!!!! in depth explanation
Vah! sir Apne to kmal kr diye, thanks sir ji, very very nice
Thanks for watching
Thank you so much for the
Great sir...
Sach mein cllge mein kuch samaj nehi pata .... But apka vdw mein sab samaj gya...❤️
A line AB, inclined at 40° to the VP, has its ends 50 mm and 20 mm above the HP. The length of its front view is 65 mm and its VT is 10 mm above the HP. Determine the true length of AB, its inclination with HP and its HT.
Thank you sooo much sir main Aaj exam deke aaya same isi type ka question aaya tha aapke bataye huye concept pr hmne bhut achha se exam Diya sara question ban gya thank you soo much sir❤
A line AB has its end A 15mm above HP and 10mm in front of the VP. The end B is 52mm above HP and the line is inclined at 30 degree to HP. The distance between the end projectors of the line is 50mm .Draw the projections of line and find its inclination with the VP. ........ Please understand it
.
Really wonderful teaching sir🙏
Teacher rocked students shocked
you are great sir
Thank you sir I proud of you
Thank you sir for your wonderful teaching
fv=50mm
Tv=60mm
phy=45 degree
beta=54 degree
alpha=45 degree
THANK YOU SO MUCH SIR TOO CLEAR MY ALL DOUBT FOR PROJECTION OF LINE PROBLEM LOT'S OF THANK YOU SIR
hats off to your explaination sir!!
Sir,May you hint how to solve this problem-
The plan ab of a line makes an angle of 30 degree with xy, ab being 45 mm long. The
point B is in the HP and point A is in the VP and 40 mm above the HP. Draw the
projections of the line AB.
Please send your email id......I will send solution for this.
tikle tikle
who who comes for one night preparation 🤣
Me 🤚
Me
Nice teaching
Sir
Thanks for watching
Thank you sir 🙂 you are 👍
Nice sir.this video is very satisfying rather than playing PUBG 😀😀😀😀
Thanks for watching.
Dhanyawad Guruji 🙏🙏🙏🙏
Shankracharya ke students bhilai..
Very very helpful video sir 👍👍
Thank you so much sir. Your videos are really helpful.
Students who watch 👀 the day before an exam
Attendence.. Please 👇
.........
.......
......
.....
....
..
.
All the best👍💯
Thanks a lot sir...
Thanks for watching.
One of the best tutor🥰
thank you so so much sir!!
Anyone from 2024👍
I'm time traveller
From 2025
Yes
Yes mai hu
Aaj mera exam hai
Or aaj padh raha hu
Nice video for engineering student and projection of points
Thank you sir...
It was very helpful for us
Thank you sir🙏
Wow sir I can't tell you cleared my whole topic
I saw your video before my college classes
Good explanation sir
Amazing explanation ❤️❤️
Any one from Feb 2024
March 24
April 16
April 17
Not at Feb 24 but April 23
May7
Thanks!
Sir Aap Apna dhyan rakhee,
Aap hamare Shiksha daaata hai❤️
aap chatna bnd kre
Wow sir you make graphics easy for me
Thank you so much sir..Ur a life saver
TV=60mmm
phi= 42 degree
Sir aap engineering graphics ke god ho best teacher ❤️💯
Thank you so much sir
Tq
Zabardast methodology
Thank You Sir ☺️
Nice work sir🙏
Thaks sir very much...🙏🙏🙏
Op sir
tnq so much
Awesome 👍
Sir am totally adicted to ur teaching😂😅
Wah sir legend ho
Thank You Sir !
top lecture.
Thanks sir 👍🙌🔥🔥🔥🔥
10:50
thank you 👍👍
Thnku very much srr ☺
Kya baay hai sir🤙🤙🤙🤙💪💪💪💪💪
Fai= 45 degree
True length= 70mm
Sir please midpoint problem in projection of lines upload
Please wait
@@TIKLESACADEMY sir please c programming ki video download kijiye
Sir basic electronics engineering ka bhi video upload kijiye please
Alpha= 45 degree
Phai= 44 degree
Beta= 53 degree
Tv= 60mm
nice explanation sir
❤️
Love you sir
🔥🔥🔥
Op...
Ok sir
Thanks for watching
A line MN, 60 mm long, is in V.P. It makes an angle of 30° with the H.P.
The end point M is 15 mm above H.P. Draw projections of line MN. Also
measure Plan length of the line. , how to solve this question sir i tried and waste almost 3 hours i cant solve it
Phi =40•
Tv=60 mm
👍👍🙏🙏🙏
Sir jab line incline hai hp se to uska top view linier line below hp banega na
Yes
Sir apne previous video me kha tha ki true lenght ke point eak line me hote hai and eak line mai lane ke liye eak trick bhi batya tha and isme aap khe rhe hai ki true lenght eak line me ho ye jaruri nahi ??
Sir THE value of Φ is 43 ° and LENGTH OF TOP VIEW IS 60 mm
Very good.... Keep it up 👍
@@TIKLESACADEMY thanks sir😊
there is something wrong if line is inclined to hp only ( as given in question ) then wouldnt it appear a straight line from top view
Sir FV AND TV ke dimensions mark nhi karne hote hai kya ??
Sir in karnataka the question are fully different, too confused
Theta=30
Alpha= 45
Phi= 45
Beta= 53
Length of top view= 6.4cm
Thanks me later😊
Sir ham aap ke sath hi draw karte jate hai
Kaun kaun paper se ek din pehle Dekh Raha hai
Best of luck for Exam 👍
Sir, which book will you prefer us for practice of no. of questions.
N.D.Bhatt
Ha
How do you knaw that the angle is for true length?
Isn't the angle(30 degree) is for the length of front view(50) instead of true length(70)?
No in question it was clearly stated with HP and that means with TL.