What Equipment Do I Need To Start A Pressure Washing Business
ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2024
- Are you looking to start a pressure washing business? Here is the equipment you will need to start a pressure washing business. Here is a short list of stuff you may need
Pressure washer
Pressure wash hose
Hose reels
Garden hose
Surface cleaner
💦💦 JOIN OUR COMMUNITY TODAY!! 💦💦
www.pressurewa...
HELPFUL RESOURCES
Have Any Questions?
Jason@pressurewashhelp.com
▶️ Check Out This AWESOME Website For Amazing Content About Pressure Washing 💰💰💰💰💰💰
www.pressurewa...
🎄🎄🎄🎄
Looking to start or grow a Christmas Lights business this year?
Join us in Cincinnati this August and take the next step to year-round profits!
www.christmasl...
🎄🎄🎄🎄🎄🎄🎄🎄🎄
▶️ Need Help Setting Up A Roof Pump?
www.pressurewa...
▶️ Need Help Setting Up A Window Cleaning Unit?
www.pressurewa...
▶️ Need Help With Pressure Washing Business?
www.pressurewa...
💸💸💸Discount For RESPONSIBID www.pressurewa...
💸💸💸Best CRM www.pressurewa...
PRESSURE WASHING CHEMICAL INJECTORS
✅ Down Stream injector 5-8 GPM www.pressurewa...
✅ Down Stream Injector 3-5 GPM www.pressurewa...
✅ XJET M5 www.pressurewa...
HOSES AND QUICK CONNECTS
✅ 3/8-Inch Stainless Steel Quick Connects www.pressurewa...
✅ Pressure Wash Hose www.pressurewa...
✅ FLEXZILLA 3/4 GARDEN HOSE www.pressurewa...
✅ O-Rings for 3/8" Viton (10 pack) www.pressurewa...
✅ Super Swivel 1/2” www.pressurewa...
✅ Hose Reel Solenoid Cole Hersee www.pressurewa...
✅ Hose Reel 12V PUSH BUTTON SEALED www.pressurewa...
PRESSURE WASHING GUN
✅ 5000psi/12gpm By Suttner www.pressurewa...
✅ Ladder Saver Long Range Nozzle www.pressurewa...
✅ 4000 PSI BALL valve www.pressurewa...
✅ Mosmatic Pressure Washer Swivel - 4000 PSI, 3/8in. www.pressurewa...
✅ Jrod Nozzles For 5-8 GPM www.pressurewa...
✅ Jrod Sleeve www.pressurewa...
ROOF CLEANING SETUP STUFF
✅ Delavan FB 2 12V, 60 PSI, 7.0 GPM ROOF CLEANING PUMP www.pressurewa...
✅ Grote 82-2100 Push Pull Switch 75 Amp www.pressurewa...
✅ 40 AMP Circuit Breaker www.pressurewa...
✅ Kuriyama Kuri Tec PVC Spray Reinforced Hose, www.pressurewa...
WINDOW CLEANING SETUP
✅ Delavan 7800 12V, 60 PSI, 2.0 GPM www.pressurewa...
✅ Grote 82-2100 Push Pull Switch 75 amp www.pressurewa...
WINDOW CLEANING
✅ Water fed pole www.pressurewa...
✅ DI Tank Unger NLite www.pressurewa...
✅ 40 AMP Circuit Breaker www.pressurewa...
OTHERSTUFF
✅ Hudson Float Valve www.pressurewa...
✅ Honda GX630 and GX690 20mm Drainzit www.pressurewa...
Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you
#PressureWashHelp #JasonGeiman #RoofCleaningHelp
When I started I rented my equipment for the first five months until I had enough saved but I made sure that I had to work to support the new equipment before I went and purchased it that way I could Adam has what kind of equipment I would need to serve my business I'm just saying I would rent and do a survey on your business and how it's growing quickly before I would go spend the money great video Jason keep it comin brother and wash on
Best Advice on TH-cam, Hope more guys read this first.
Is it still going good? How much are you making monthly?
Very helpful in starting up, best video I’ve found so far. Thank you!
This guy is entertaining to say the least
He is pretty cool
Another great video.
50' sections just like FD attack lines. 1 burst section is replaceable.
Thanks foooor all the links!
Thanks for watching. Yes I like using the 50 foot sections. This way when one goes bad I don’t lose 200 feet
@@kingofpressurewash or could just buy a patch with clamps so you could cut the blown section out out could cut and out male and female end on to create two new hoses just a thought
Great video, I am a newbie, You mentioned a 1500 dollar 5.5 GPM washer to start with. I know this video is old, but can you tell me a brand, and where I should look for one? I didn't see a link, and now I fear that the prices are a lot higher, and I don't think a $1500 machine is the same as when this video was made. Thanks in advance.
I really appreciate your videos. You da man!
Thanks for watching
You brought up a lot of good ideas, I'm looking to start a pressure washing business. Your video was what I needed. I might have to come down to Cincinnati, before I make the big commitment.
I’m torn between an enclosed trailer, or a work van. I do have a truck, however it’s my personal truck. Didn’t really want to beat it up. So I’m banging my head against the wall trying to make a decision
If you do a van make sure the place for equipment is separate than the cab. You carry a lot of chemical that not really good for to breathe all the time.
Thank you for the reply !!
@@kingofpressurewash so with trailer its about 6000 or more,cause you upgraded pressure washer ,so 4gmp is not good enough
Were is the list to buy everything. I am just starting out. I am in northeast Ohio. I really enjoyed your video.
Why do we need at least a 4gpm pump ? Would a 3gpm work?
Yes a 3 gallon will work. But it's all about flow. The more gallons per minute you have the faster you clean
I really appreciate your knowledge, you've helped me so much the last year
Awesome I’m glad I could help be successful
Thank you for information it will be very interesting and helpful
Is there anything else I can help you with? If you would like to ask me a question you can go to pressurewashhelp.com/Askjason
Learned alot from you Jason thanks still starting off but took your advice it's not about the pressure it's about water flow
absolutely it about the chemicals and dwell time
This is the first time I have seen this video. I have been watching your videos and learning. But I have to say I'm in a tough spot. I have two trucks. One old and needs a repaint but ready for anything. It is a 1988 f350 crew cab dually air conditioner needs recharge and paint needs work that is my work horse. The truck that I have been using to do bids and lite work is a 1997 f150 4x4 xl with tinted windows. We all know first impression is everything. I your truck looks nice when you give the bid your in verse an old old truck makes you look like you are ?. My bid truck is on its last leg I was told by the mechanic. Do I ?
We do all our bidding on line
Hi I've been following you for a while now.Thanks for your ideas I'm at the ability to buy a stainless steel surface cleaner.My p Washer is 4 gpm and 4k psi.Im also searching for a easy read meter for my sauce mix.Thanks Tom
Im going to start a pressure washing bussness in washington state can you tell me what brand of pressure washer i should look for
I have a 2.5 gpm Simpson 3400psi can I start with that
You can start with it but you really need at least a 4gpm washer or higher. I have a 5.5 gpm washer and a 2.5 gpm washer. I only use the 2.5 as an emergency back up. If you are serious about doing pressure washing on a regular basis do yourself a favor and go bigger
Love it man
I'm in Norwood! I would like to need up and pick your brain a little about pressure washing tips! And info as much as I can take in
Great information Bro
T J B thanks
Your help is great! I'm already growing in the business while being setup with the local shop.
That’s awesome
Can you cover the recommended surface cleaner for this particular setup.
amzn.to/2MyB04C
I guess Im kind of randomly asking but do anyone know of a good place to watch new tv shows online?
@Baker Rodney i use Flixzone. You can find it by googling =)
@Baker Rodney lately I have been using FlixZone. Just search on google for it =)
@Baker Rodney i use flixzone. You can find it on google :)
Pardon my ignorance, but at the 7:50 mark, when you say 1 wire vs 2 wire, are you referring to the hose or hoses? I’m sorry. I’m new
No it’s the size of the hose. How many wires are in your pressure washing hose
Hello I’m up in Northwest Ohio and I would like to start a pressure washing business.
Where do you get a 5.5 GPM 2500 psi pressure washer for $1450-1600 ?
If high pressure doesn’t clean, how come almost all driveway jobs are not sprayed with chemical? Maybe people are starting to but it still worked fine without it
Keep it coming 😁
Thanks For Watching
@@kingofpressurewash Jason, I've been in another business way to long, now it's all computerized, or sent to China, so I bought a used E150 Van since we have an HOA preventing trailers. I want to rig this for 5.5 GPH/4200PSI, 50' sections of high pressure hose, 1/2 hose to fill a 500 gal. tank, valves to turn everything or anything I want off, bleach and surfactant. I already have a smaller washer, and smaller surface cleaner, so from this video I'll need a JRod quick connects, and some reels. Most of all, I want to train with you for two reasons...... I think you know everthing I need to get this thing off the ground and running, and you don't seem to have a line of bullshit. Am I headed in the right direction? The van will allow me to work at home without drawing but so much attention to working at home, which isn't allowed per HOA. Thanks for all the knowledge, and I look forward to seeing you soon.
I have a 4gpm 4500 psi pressure washer and a 20" surface cleaner that came with 2.5gpm 15 degree tips. What should my pressure be at?
that training link dont work? im in Columbus
What is some good cheaper 1 wire hose
amzn.to/2JOH7PV
How much is your pressure washing training
Did you make the video of the soap?
What’s your opinion on the 8 gpm 1600-1700 psi with the gx390?
I ran one for about a year when i first started. it did ok
Thank you.
No tandem axle?
Nope not that much weight
Poor mans jumping round like he has to pee I can relate 👍😜
Instead of that x jet hook up set your suction hose for pulling soap use a tee with a brass valve thats reduces to the size of hose going into the soap bucket ... will that work ?
I love going back to your old videos when building a new trailer.
Thinking about building an enclosed in the winter/ spring
What length ladder would you suggest??? 32',28' ?
Just depends. A lot of our houses we can get away with a 28 foot no problem
Trying to start a mobile car wash which one is the best trailer, enclosed, or van?
What’s a good setup with 4K
Depends on if you need to be secured or not. If need to be secured I would do an enclosed trailer.
What equipment do I need for a 8gpm machine? Do you have a parts list for 8gpm
Yes if you go on my website it’s somewhere in there
My god this was hard to listen to.
To much talk you need to slow down