Thank you so much for the tutorial. I replaced my props wrong and the drone was making a low sound like you would hear on a bigger drone. I knew something was wrong but I took off and the drone failed. I looked at this tutorial and I fixed it and it succeeded. Thank you.
Please help, I am following every steps, but the new screws won't go in, when the old screws just go in without problem. What should I do ? Is it possible that the new screws aren't the same ?
Wow, I have this issue for month! Today I call DJI and went though some details with them after that the result was sending the drone to them I look on TH-cam to see other options, and I found this video and guess what? Pum 💥 Problem Fixed after hitting the top of the drone hehehehhehe thank you
Hi there, thanks for sharing. We are glad to know this video helped. If there is anything else we can help you with, please feel free to contact us. Happy flying!
I’m not quite sure, but my Mavic mini seems to be drifting more than usual and I did recently have a collision where my propellers were hit multiple times. The crash wasn’t too bad and nothing else appears to be damaged on the drone. Should I replace the propellers even though I can’t see much damage?
Adam Thomas Yeesh, that seems a lot worse than my issue! It might not even be a problem at all, but mine seems to be a little less stable in the air. Your issue on the other hand seems a lot worse than mine. Change the propellers and make sure they are on their correct positions. You should also look into calibrating the compass and IMU. If that doesn’t work you should probably get it checked after quarantine. Hope everything gets fixed soon 👍
i bought the Mavic Mini fly more is there a video on how to store the drone in the box , i think i did it wrong since i got a motor warning and change prop on right back side after just 3 flights with no drama :), so it had to be the way i stored it
I have the same problem too and I think so too. I just think that I have to watch out with the propellers when I put it into my box. I Hope I could help you.
Recently, in fact yesterday, my Mavic mini was making a beeping sound on the left back propeller. At the base it felt very warm compared to the other propeller bases ... told me that I needed to change it .... Any reason why?
It could be nicked or warped. I had to replace mine today when it said it was rotating too fast, when it landed it was making that beep sound. I confirmed it was nicked so I changed it. The blades need to be in as close to perfect condition as possible for proper, stable flight.
What size is the screwdriver? I looked on the website and DJI doesnt sell the screwdriver if you didnt purchase it in the Fly more package. I was going to get a screwdriver off amazon but not sure what size to get
Hello, there. A screwdriver for removing propellers comes with the Mavic Mini aircraft. To make it more convenient for you, we use the common Phillips screws. You can use a PH0 screwdriver to remove and install the propellers. PH0: The screwdriver bit's diameter is about 3.0 mm, and it can be used for mounting or removing M1.6 to M2 screws. If you have any questions, please contact out support through email. Here is the link: www.dji.com/support?from=store_footer
Hi Sam, sorry to hear about the difficulties that you encountered. Could you please record a short video to show us the issue? We'd like to help you check it. Thanks.
Hi! I have a question! Why is the code different on the spare propellers? G2 7426 F....F1 7426 F...C3 7426 F... what do the first 2 characters mean? (F1 ... C3 ... F1 ...)
I was able to change the propellers in my Mini SE easily. However for the Mini 3 , three of the four screws are too tight. I think I’m stripping the plus ; I cant get them out :(
Hello, there. Sorry for the inconvenience. You may try as follows: After the screwdriver is inserted into the screws, please apply with certain force to insert the screws stably and disassemble them. Or you may try another recommended screw head. Screwdriver model: PH0 Phillips screwdriver.
@@DJITutorials thanks for the tip. I’ve ordered a PH0 screwdriver as recommended. Someone had suggested I would need a PH0000 type but I couldn’t find one. There is a PH0 Philips ; I have ordered it on Amazon
@@DJITutorials I got a PH0 screwdriver and I was able to remove one more screw. I’m now left with two screws I cannot get out. The + on the screw doesn’t look like a plus anymore. How can I remove the plastic (propeller) and the screw without causing damage? (I live in the U.K. do you have any physical locations in London where I can bring this into please ?)
What tool can I use to remove the black plastic surrounding the stripped screw? I tried using a hot knife to melt the plastic but it didn’t work and I’m nervous about causing damage
Hi there, since there is no specific picture or video, we don't know which screw you have screwed. kindly please contact us support team via htttp://www.dji.com/support, we'll do our best to help this out.
I think I answered my own question, I didn't think it was a big deal but you really do have to replace the screw with the propeller. It makes a world of difference.
If the props come off in the air then it falls.... That's why they have thread locker on them. Thread locker usually fully cures within 24-48 hours, but IDK what brand/model paste they have on there.
No. The Mavic Mini is an entry-level product that is used with our brand-new app, DJI Fly. We will continue to optimize this product according to customer feedback. If you have relevant compatibility requirements, please feel free to tell us. Your suggestions are very important to us.
@@DJITutorials well yes. just today I saw an interesting polirized les for this model. it weights only 1.3 grams... but that will make the drone to weight more then 250 so i cant buy it :P
Hello, the Mavic Mini Propellers on DJI official web: store.dji.com/product/mavic-mini-propellers is out of stock at present, you can click the "In Stock Reminder" and leave your email, we will send you a notification as soon as we have the item in stock. Thanks.
I felt like I already lost the screws and my drone already felt of the sky and I haven't even bought one yet... Also the screwdriver idea just killed any possibility of traveling with it, as that screw driver will be confiscated at any airport. I guess buying a new screw driver anytime one lands?
I live in Philly and went to California over Christmas vacation. I bought myself a Mavic mini for Christmas and had it shipped to my moms house in Cali because it wouldn’t be at my house before we left Philly for vacation. Anywho, coming back I had the drone and everything that came with the drone in my carry on (I didn’t even think about the screw driver) and TSA didn’t stop me or anything.
Why is it so complicated? Just make them click in like other DJI drones....why the need of screwdriver and all those extra steps....you made a drone simple and more complicated at the same time.... :/
They most likely had to do it this way. The hardware/mechanism for the push/twist props would’ve added to the weight and when you’re trying to keep the drone under 250 grams, every little bit counts.
Thank you so much for the tutorial. I replaced my props wrong and the drone was making a low sound like you would hear on a bigger drone. I knew something was wrong but I took off and the drone failed. I looked at this tutorial and I fixed it and it succeeded. Thank you.
THANK YOU! I had the wrong number of striped propellers on ... got it now! WOO!
Extremely helpful. Thank you!
The video talks about removing thread lock. Should we be using thread lock when we replace the propellers?
You should throw away the old screws, and the new screws already have thread lock on them.
Are there any low-noise propellers available for the mavic mini? Can the low noise ones be used from the larger Mavic models?
Excellent presentation. All the information I needed. Thankyou
Please help, I am following every steps, but the new screws won't go in, when the old screws just go in without problem. What should I do ? Is it possible that the new screws aren't the same ?
Very Nice I'm Waiting For This Dji Magic Mini 😊
Wow, I have this issue for month! Today I call DJI and went though some details with them after that the result was sending the drone to them I look on TH-cam to see other options, and I found this video and guess what? Pum 💥 Problem Fixed after hitting the top of the drone hehehehhehe thank you
Hi there, thanks for sharing. We are glad to know this video helped. If there is anything else we can help you with, please feel free to contact us. Happy flying!
I’m not quite sure, but my Mavic mini seems to be drifting more than usual and I did recently have a collision where my propellers were hit multiple times. The crash wasn’t too bad and nothing else appears to be damaged on the drone. Should I replace the propellers even though I can’t see much damage?
Adam Thomas Yeesh, that seems a lot worse than my issue! It might not even be a problem at all, but mine seems to be a little less stable in the air. Your issue on the other hand seems a lot worse than mine. Change the propellers and make sure they are on their correct positions. You should also look into calibrating the compass and IMU. If that doesn’t work you should probably get it checked after quarantine. Hope everything gets fixed soon 👍
i bought the Mavic Mini fly more is there a video on how to store the drone in the box , i think i did it wrong since i got a motor warning and change prop on right back side after just 3 flights with no drama :), so it had to be the way i stored it
I have the same problem too and I think so too. I just think that I have to watch out with the propellers when I put it into my box. I Hope I could help you.
My propellers have all one orange stripe but half of them have a raised mark. What should I do?
i ❤ this dRoNe
Recently, in fact yesterday, my Mavic mini was making a beeping sound on the left back propeller. At the base it felt very warm compared to the other propeller bases ... told me that I needed to change it .... Any reason why?
It could be nicked or warped. I had to replace mine today when it said it was rotating too fast, when it landed it was making that beep sound. I confirmed it was nicked so I changed it. The blades need to be in as close to perfect condition as possible for proper, stable flight.
What size is the screwdriver? I looked on the website and DJI doesnt sell the screwdriver if you didnt purchase it in the Fly more package. I was going to get a screwdriver off amazon but not sure what size to get
Hello, there. A screwdriver for removing propellers comes with the Mavic Mini aircraft. To make it more convenient for you, we use the common Phillips screws. You can use a PH0 screwdriver to remove and install the propellers.
PH0: The screwdriver bit's diameter is about 3.0 mm, and it can be used for mounting or removing M1.6 to M2 screws. If you have any questions, please contact out support through email. Here is the link: www.dji.com/support?from=store_footer
Bjt what if you are running out of propellors, is it any way you can get new ones by themselvs? PLEASE ANSWER!
Yes, you can get them from the DJI store.
Hi dji .. i have a probleme with the app on android.. i can't go on quick shot... (the little white icon)... please help me .
thank you
Hi Sam, sorry to hear about the difficulties that you encountered. Could you please record a short video to show us the issue? We'd like to help you check it. Thanks.
DJI Tutorials how do you want me to send to you?
DJI Tutorials (where) do you want me to send the video .thankyou
Hi! I have a question!
Why is the code different on the spare propellers?
G2 7426 F....F1 7426 F...C3 7426 F...
what do the first 2 characters mean? (F1 ... C3 ... F1 ...)
Hello, the codes are various because they help us to distinguish the molds that the propellers made from. Thank you.
Torque spec on the screws?
Torque to them very nicely 🤣 No, seriously, tighten them to their stop. Don't force them any further.
I was able to change the propellers in my Mini SE easily. However for the Mini 3 , three of the four screws are too tight. I think I’m stripping the plus ; I cant get them out :(
Hello, there. Sorry for the inconvenience. You may try as follows: After the screwdriver is inserted into the screws, please apply with certain force to insert the screws stably and disassemble them.
Or you may try another recommended screw head. Screwdriver model: PH0 Phillips screwdriver.
@@DJITutorials thanks for the tip. I’ve ordered a PH0 screwdriver as recommended. Someone had suggested I would need a PH0000 type but I couldn’t find one. There is a PH0 Philips ; I have ordered it on Amazon
@@cats-uk Thanks for your update as well, if there is anything else that we can help with, please feel free to contact us anytime.
@@DJITutorials I got a PH0 screwdriver and I was able to remove one more screw. I’m now left with two screws I cannot get out. The + on the screw doesn’t look like a plus anymore.
How can I remove the plastic (propeller) and the screw without causing damage? (I live in the U.K. do you have any physical locations in London where I can bring this into please ?)
What tool can I use to remove the black plastic surrounding the stripped screw? I tried using a hot knife to melt the plastic but it didn’t work and I’m nervous about causing damage
I recieved a unit whit one screw not screwed in properly so i screwed iy in my self. Is this the right way?
Hi there, since there is no specific picture or video, we don't know which screw you have screwed. kindly please contact us support team via htttp://www.dji.com/support, we'll do our best to help this out.
I can't tell, should i be screwing them in 100% or more at 90%? When I screw them in 100% the blades don't hang limp like they're supposed to.
I think I answered my own question, I didn't think it was a big deal but you really do have to replace the screw with the propeller. It makes a world of difference.
What if the screws become loose when the drone is flying in air?
If the props come off in the air then it falls....
That's why they have thread locker on them. Thread locker usually fully cures within 24-48 hours, but IDK what brand/model paste they have on there.
Is it not a good idea to reapply new loctite or some thread adhesion compound?
Hi, there is some Loctite on the threads of the new screws. You can see a small amount of blue Loctite if you look close enough.
My Mavic mini props are squeaky when I move them manually is that normal?
Jasvinder Singh They might be too tight
did you find out? Mine do this too
🥳🥳Believe or not Right now I bought from Currys PC World UK dji mini more Combo fly £459 only. ❤❤❤🥳🥳🥳
Hurrrryyyyy yahooooo
Sylheti Blogger London that’s more expensive than the original price
@@devinderkumar8202 but it's Combo that's why extra. ×2 battery and more
Thats the price of it everywhere unless you’re in america...
I Love mavic mini filing Happy...
can use the new DJI goggle FPV, with this drone?
No. The Mavic Mini is an entry-level product that is used with our brand-new app, DJI Fly. We will continue to optimize this product according to customer feedback. If you have relevant compatibility requirements, please feel free to tell us. Your suggestions are very important to us.
@@DJITutorials well yes. just today I saw an interesting polirized les for this model. it weights only 1.3 grams... but that will make the drone to weight more then 250 so i cant buy it :P
DJI Tutorials litchi please 😁
The only flaw on mavic mini compared to big boys?
do we need sd card for quickshot
Yes
anyone else have issues getting screws in straight?
I don't like the propeller of the dji Mavis mini, because when I get to flying it sometimes it pop off the propeller.
Hi, sorry for the inconvenience. Your feedback will be forwarded to the related team. Thank you.
I can't find propellers in stock anywhere
Hello, the Mavic Mini Propellers on DJI official web: store.dji.com/product/mavic-mini-propellers is out of stock at present, you can click the "In Stock Reminder" and leave your email, we will send you a notification as soon as we have the item in stock. Thanks.
Usa store
*DJI, RESOLVAM A QUESTÃO DA BATERIA DO CONTROLE FICAR CARREGANDO A BATERIA DO O TABLET OU CELULAR ANDROID!!! BATERIA DO CONTROLE TÁ DURANDO POUCO!!!*
Unfortunately I can see how users doing this incorrectly will cause this drone to fall out of the sky. Yikes !
I felt like I already lost the screws and my drone already felt of the sky and I haven't even bought one yet... Also the screwdriver idea just killed any possibility of traveling with it, as that screw driver will be confiscated at any airport. I guess buying a new screw driver anytime one lands?
Yeah, good point. Guess it's best to place the tools in checked baggage.
I live in Philly and went to California over Christmas vacation. I bought myself a Mavic mini for Christmas and had it shipped to my moms house in Cali because it wouldn’t be at my house before we left Philly for vacation. Anywho, coming back I had the drone and everything that came with the drone in my carry on (I didn’t even think about the screw driver) and TSA didn’t stop me or anything.
@@rwolfcastle problem solved :)
Been through various airports without an issue even carrying my dji in its bag as hand luggage.
Can i have a heath
👍
Did you guys need make it so tight to the point you have to damn near break it to get it off
In that cases.. Try to use after market precision screw driver
I faces same problem while i need to change my mini 2's props with screw driver from the package.
A dog ate my screwdriver.
A Icrap phone screwdriver will do the same job or a cheap jewellers screwdriver the same.
''Erreur vitesse moteur ESC'' depuis la dernière maj, suis je le seul ?
"Erupted"?? Must've got lost in translation lol
Hello
hello
Hello
Hello
Too fast not clearly explained
Why is it so complicated? Just make them click in like other DJI drones....why the need of screwdriver and all those extra steps....you made a drone simple and more complicated at the same time.... :/
They most likely had to do it this way. The hardware/mechanism for the push/twist props would’ve added to the weight and when you’re trying to keep the drone under 250 grams, every little bit counts.
It's hardly complicated, just takes a little longer than other dji props.