Chris: I am an avid viewer of your programs and enjoy them thoroughly. I live in Canada and want to replace my ancient Bianci and I am a retiree not a skill rider like you, what do you recommend for a replacement of around HK$6000, considering the bike in HK is about 20% less and don't have to pay 12% sales tax on top. Brand and model if you can. Thanks and much appreciated.
tsz chun au yeung fitting is to measure the rider body position when one is on a road bike, as road bike position are normally being measured down to millimeters, a proper fitting can ensure less body stress and proper energy transfer onto the road bike, but like Chris said, ride first, don’t spend all your money on it first, wait until you really like the sports and you cycle enough then only you go to do fitting.
Fitting is to avoid injury. If you're using cleats, wrong cleat position, seat height, crank length etc. will hurt your knee. Stem length will hurt your shoulder. A respectable shop should do a standard fitting for you and you can readjust yourself after a few ride. In general you don't make the change once you have a proper fit. You may need one when you start changing parts
新手唔洗考慮咁多，
應該踩國產平車，
睇吓自己係咪三分鐘熱到！
fitting就簡單d唔洗太複雜，
根據以下幾點調較座位，
第一：腳根踩腳踏踩到六點鐘方向時，
腳放鬆時可以完全伸直。並且臀部應該安定地坐係座位，腳尖掂腳踏腳就會微曲，相當好發力。
第二：用腳尖踩腳踏到向前三點鐘方向時，菠蘿蓋要同腳踏中心點垂直對齊
，同樣都係為左更好地發力
第三：坐位既前半部份應該保持平水（差唔多同樣高度），
可以減輕手部負擔
如果都唔岩，可能車架尺寸唔岩你，或者要改立把長度、曲柄長度、坐管後飄距離
踩踏時上身保持穩定，腳要保持同一軌跡，不要左搖右擺長期會好傷
培養到興趣後就可以換車，入門買三千蚊內就夠。換車先至做fitting，佢會幫你揀埋合適既車架
Tyler Wu 師兄講得好好👍
師兄可唔可以推介下系邊度買車可以3000內？
你唔介意架車重啲,veloce有啲款三千蚊有找。
想請教 上lock點樣微條lock片？
有冇fitting 好介紹同埋大概要幾錢
新手買車一定係睇樣 個樣岩自己心意馬力立即加多10匹
我覺得新手做唔做fitting，係睇買成車定係自己砌車。如果自己砌車既話，我建議做一次會好啲；但如果買成車既話，就要睇自己有幾多子彈，，fitting完之後有無錢換手把/ 鵝頸/ 曲柄........
自己砌會平幾多？
我覺得買錯不停換件反而更貴
@@limother3749 其實唔係平幾多既問題，而係可以自己選擇用咩件，例如碳件/ 鋁件、全新/ 二手、105件/ Ultegra Di 2件，豐儉由人
@@lingwong5004 認同，但相信大部分人一開始都係買成車多，而成車一定唔會 fit 到每一個人
其實自己砌一定比成車個cp值低
因為零件單價係貴好多
其實果陣我第一次踩rb,果陣112kg,入手giant propel slr1,一直都冇事，到呢家90kg都仲用緊呢部車，原裝刀拎🤷🏼♂️馬牌5000，giant車就算重量級車手都可以carry到，唔使驚
停車腳架我有裝過,唔介意重量,但不知怎的總是發出噪音,明明菜籃車腳架沒有噪音,最後還是拆了
買架合自己身材大小的單車是第一步令你減少運動受傷。自己可以做些基本fitting，主要是坐位高低和前後。TH-cam都有些片。Chris，有機會可講下如何調教坐位，把手前後和高度。
You can do simple fitting yourself. A lots of video in YT.
帮到很大忙，我就是准备向公路车迈进
我125公斤，踩緊Argon 18 GalliumCS，大家參考下啦
咁西利，配咩鈴
Hui Cheungkit Vision 55 SL
啱先睇完新手買車嗰條片 退出Full Screen就見到呢條😂
重温埋第一集先🤪
同埋我今個月買車啦👏🏼👏🏼👏🏼
睇完段片的確知道多咗一些Road bike 既知識
最近由我第一架既Road Bike(Giant SCR1 2013 M碼)轉左做Giant Contend 2 2021 (46.5cm)
不過好似有啲末得心應手噤
唔知道係咪好似你所講噤
車架大細唔啱我
希望你可以幫到我既問題啦
另外想問你果架係咩車來架
好似踏得好順噤既
P.S : 經常睇你D片，拍得好好
繼續努力，支持你
車架細咗小小可以加長龍頭，拉高seattube,大咗少少就冇得搞
Carlos F 車架相差 3.5cm 我見中碼應該係50cm
如果你既意思係咪換個龍頭及拉就個seat tube就會好一點點？
如果車架太小是這樣的做，支stem可自行換長短，不貴
Chris: I am an avid viewer of your programs and enjoy them thoroughly. I live in Canada and want to replace my ancient Bianci and I am a retiree not a skill rider like you, what do you recommend for a replacement of around HK$6000, considering the bike in HK is about 20% less and don't have to pay 12% sales tax on top. Brand and model if you can. Thanks and much appreciated.
Bar tapes are beautiful, mate~~
我體重110kg，之前孭住十幾kg背囊 踩架city bike踩馬路，覺得有時架車會飄，唔知係唔係過左個maximum loading
我都係買你圖示的一款, 唔洗放車時刮花. 而且影相打咭型啲! 另外你好少早上九點幾十點出車喎, 梗係熱C人啦. 12:00個師姐係唔係P牌架,?! 睇都唔睇就打橫!
謝謝分享 👍
想問你哋啲單車泊係邊？
家裏拆前輪擺在露台
屋內
Enoch 那有沒有方法更安全
不在屋內
@@sit5844 無 屋外好risky 車界普遍認為 架車貴過1000蚊就會比人偷 但多宗案例證明 匪類平貴通吃 幾百照偷 所以。。。 但係如果你係住屋苑 有私人單車停車位 即外人接觸5到果d 就ok 我見過有人泊公路車 暫時都相安無事 至於泊街就。。。 睇運
痴痴槍CMG_ 屋外只有租倉
如果有錢人我都見過屋企樓下停車場，我見過d貴價私樓停車場係有單車停泊專用位
That girl in the end making a U turn. WTF. I crashed into a girl doing the same thing.
其實香港有咩地方賣公路車………(想入坑＞。＜)
普通單車鋪都會有，入去問職員有無岩新手用既公路車，佢地都會同你介紹返，價錢大約1000-3000不等，視乎你budget幾多。個人推介Trinx Tempo 1.0（大約HKD 1500)，或者片主介紹既giant scr系列。
👍
btw, 踩籃車也是不用背書包XD
無知既我試過孭斜孭袋踩 煩到仆街
我都照孭，孭左上身較到條帶最短放喺背脊，佢就唔會fing黎fing去😂
@@alexwu2701 真係會fing黎fing去煩到仆街,我而家孭左上身較到條帶最短放喺心口位
單車有專用斜孭袋, 三條带Y字設計, 可以參考下
希望會有新手第三集
如家裏沒有露台應泊在那
意思是指單車
@@sit5844 我泊房 吊牆既
g g 家裏沒錢💸💸
@@sit5844 喺間房幅牆度開幾個窿再放個架要幾多錢呀？……咁既錢都冇就唔好玩RB啦，因為保養之類要用既錢更加貴😭😭
無聲 不妨直說其實我家有錢鑽牆只是爸爸不准泊在家裏😭😭😭😫😫😫
真心想問大家著單車衫搭mtr會唔會覺得尷尬😅
有單車車係隔離咪唔尷尬
Haha,單車褲只係一條有pad嘅泳褲
想問點樣可以令到個屎忽唔痛
seat位角度
what is fitting😂
tsz chun au yeung fitting is to measure the rider body position when one is on a road bike, as road bike position are normally being measured down to millimeters, a proper fitting can ensure less body stress and proper energy transfer onto the road bike, but like Chris said, ride first, don’t spend all your money on it first, wait until you really like the sports and you cycle enough then only you go to do fitting.
Fitting is to avoid injury. If you're using cleats, wrong cleat position, seat height, crank length etc. will hurt your knee. Stem length will hurt your shoulder. A respectable shop should do a standard fitting for you and you can readjust yourself after a few ride. In general you don't make the change once you have a proper fit. You may need one when you start changing parts
我琴日好似見到你
Yam Carson 講真其實真係好見到佢
因為只要踩大埔同埋佢成個身都黃黑色好難認唔到
用高度去買車唔準
1