I have a drive wired like this but the motor is running the opposite direction. I tried changing the rotation direction in CCW but it didnt change the rotation direction. I had to flip 2 wires to get it to run the correct direction. Any idea why changing the rotation direction had no effect?
Crazy question...did you download the parameter after changing it? Personally, I don't like to change that parameter. I would rather correct the rotation. The less parameters you have to change when swapping out a drive, the better.
Hey buddy so we have this drive we just installed. The only difference is we have green as foward and red as reverse? So when the green button is pushed it goes foward and when the red button is pushed it goes reverse. Bit can't program it to do that any help will be appreciated
Nic work... Sir I want to use AB rockwell software for plc programming download and upload different files....will u plz suggest me best software for all plc...free software
As far as free, have a look at the Connected Components Workbench software that does a variety of PLC and HMIs plus you can program in Ladder Logic, Function Blocks, and Structured Text. www.theautomationstore.com/where-can-i-download-allen-bradleys-connected-components-workbench-for-the-micro800/
Hello there, can you post a video on how to auto stop a motor if there is not load on it after running for 5 minutes
Did you have to change any peramiters to set IO terminal 3 as a reverse input
Not beyond P-46. After that terminal 3's default is reverse
Ok thank you that helps
You are welcome
I have a drive wired like this but the motor is running the opposite direction. I tried changing the rotation direction in CCW but it didnt change the rotation direction. I had to flip 2 wires to get it to run the correct direction. Any idea why changing the rotation direction had no effect?
Crazy question...did you download the parameter after changing it?
Personally, I don't like to change that parameter. I would rather correct the rotation. The less parameters you have to change when swapping out a drive, the better.
Do you have to wait till fan completely stop spinning before u change direction
No you don't have to wait but it does heat up the windings.
Hey buddy so we have this drive we just installed. The only difference is we have green as foward and red as reverse? So when the green button is pushed it goes foward and when the red button is pushed it goes reverse. Bit can't program it to do that any help will be appreciated
You want this 2 wire control video, then I think it is terminal 3 but you 'll need to check the manual.
th-cam.com/video/Ln50UTpZMuE/w-d-xo.html
Is it possible to use a momentary push button for the reverse control?
Not directly, you would need some relays.
Mr Tom how are you thank you so much for your class in control system please Mr Tom am a began in control
I need you so much in this class on ster dalter starter control
Form Africa
Glad they were helpful. Thanks for watching!
Nic work...
Sir I want to use AB rockwell software for plc programming download and upload different files....will u plz suggest me best software for all plc...free software
As far as free, have a look at the Connected Components Workbench software that does a variety of PLC and HMIs plus you can program in Ladder Logic, Function Blocks, and Structured Text.
www.theautomationstore.com/where-can-i-download-allen-bradleys-connected-components-workbench-for-the-micro800/