Me alegro que ya esté tomado forma pero me di cuenta que no le pusiste gomas entre el rompe piedras y el chasis de trasporte para amortiguar las vibraciones y le vas a colocar en el siguiente episodio o no planeas colocarle ????
I like to send the pilot three what I’m doing, score where the hole saw it self will cut, then drill another small hole where the saw scored so chips can fall out of the hole, and use compressed air 👍🏻 takes another minute longer but it works for me
Most important is to keep your drill speed and pressure low, to fast as used here over heats the drill teeth and shortens if not totally ends the drills life. .
Your jaw rock crusher is gonna be built better than any you can buy from a manufacturer. It's looking great, excited to see the first crushed products dropping out the bottom.
Pretty cool build. I repair small crushers like this for Rocklabs and am in Nevada now doing that. For your jaws you may want to see if you can get some hardened AR plate. The rocks will destroy the mild steel and rebar in no time. Watch for any deformation or cracks at the bottom, the pressure to crush rocks is incredible Great job, lots of work you have done.
Hi Donn, Your skills are so darn impressive. Beautiful work, just fantastic. Thanks for the video, and I hope we're going to see some crushing next week.
amazing mug! "moin" or in hamburg "moin moin" is a north german variation of "morgen" (which is the short form of "guten morgen" --> good morning). but unlike "morgen" and "guten morgen" you can say "moin" / "moin moin" any time of the day as a greeting.
Yer craftsmanship gets better with each build bud. Im very impressed. You're a talented young fella. I love watching yer stuff. Keep up the good work!!! Casanova Pennsylvania out.
All coming together, I bet many viewers would love to work with you, I do. Yes just to watch the welds so clean and amazing. I will sign up for class. I see weather not so nice, enjoy your time, big thanks....... :)
Looks like a nice build. By the looks of the rust on that Peugeot, they must use salt on the roads in you part of Europe. No shortage here in Minnesota in the winter either. Lol
This build is totally awesome. Love how quickly you can put a trailer together. Maybe only slightly jealous? Excited for the next episode and then the next project!
I think its already late, but I'm only found your channel now :) On industrial application we used triple washers, then couple of springwasher and a nylock for all the screws. Otherwise the vibration will loosen all your bolts. We use Countersung headed screws from the inside, so it is flat with surface(it wear out later), and from the outside you can use the pneumatic wrench to tighten it up(the conical surfaces friction holding it without a key on the otherside). And when the jaw plates needed replacement, we just torch cutted the bolts, and replaced them.
I have made one many years ago , there is a scrap yard near I was living and this scrap yard is the only one for several mills around so everyone go there selling their scraps metals, I went there from time to time sneaking in the scrap for valuable and I found some plates from an old stone crusher, I got them for about 30 $ . Couple years later I made a stone crusher when I found an excentrique shaft at the same scrap yard .
Hey Don great update as always. About the hole saws, instead of hole saws you could try annular cutters. They are more expensive but also way better suited for thicker materials and you can cut more aggresive with them. Greetings from the Netherlands, Mark
Very interesting Mark. I was surprised to see him using a hole saw but until today I've never heard of an Annular Cutter, thank you. I need one of these magnetic mount machines.
I bet you could find some hub rings to adapt those wheels. Audi uses 5x112 also but I think maybe a larger hub. Porsche and Bentley. At least it’s not too big! I have a MK7 golf too lol
With the rock crusher taking priority on completion of the ATV, I'm guessing the shop expansion may be happening sooner than later? Regardless, I look forward to seeing this machine work.
More fabrication videos on th-cam.com/users/DonnDIYvideos
Me alegro que ya esté tomado forma pero me di cuenta que no le pusiste gomas entre el rompe piedras y el chasis de trasporte para amortiguar las vibraciones y le vas a colocar en el siguiente episodio o no planeas colocarle ????
Why have you not finished the ATV you haven’t painted it like always ?? Looks like it needs a few things to finish it off
To me or is it ?!?!
@@elgarajedetk r cccffxx
Do you have the drawings in dxf or CAD dwg for sharing, thanks.
Hello Donn,,, I liked you videos,,,I liked you job plus you equipment,,,. I loved,,,from Virginia
When using hole saws, I blow compressed air on them, it keeps them cool and keeps chips from binding up and ripping teeth off. Great work as always!
I like to send the pilot three what I’m doing, score where the hole saw it self will cut, then drill another small hole where the saw scored so chips can fall out of the hole, and use compressed air 👍🏻 takes another minute longer but it works for me
Most important is to keep your drill speed and pressure low, to fast as used here over heats the drill teeth and shortens if not totally ends the drills life. .
Somehow I feel like I'm a member of the "A Team" when watching your videos. But, I do love it when a plan comes together 😜 enjoyed 👍 👍
Pity The Fool!
Auch wenn der Steinpeiser kein Lenkrad hat,
DU BIST DER BESTE
It’s really looking good now Donn !! Thanks for sharing with us, Fred. 🙏🏻🙏🏻👍👍👏🏻👏🏻👋👋
Damn I love the stuff you can make!...much respect from Zimbabwe 🇿🇼🇿🇼🇿🇼
Long wait is over, yet again. 💪
💪😁
Can't wait for the next installment 👍💯
Rumours have it that donn DIY created his entire workshop from scratch
Whenever he wants to make anything, he ends up with a battle tank...
He pretty much did.
Nope he buys all new tools, leaves them to rust in the yard. Then recombines them into works of mechanical art.
Завидую белой завистью за прямые руки!
Donn for president!! (-:
А что завидовать,бери и делай,кто и что мешает делать так же,а может и лучше.
@@константинлуценко нет воли
Чертовски мощный аппарат! ))) Довольно сложный и великолепно получается!
Я понимаю камни дробить на щебень этот аппарат
I was into Contracting Highway Construction before retiring. You've created a nice jaw crusher...it would work great for a "piliot mill".
That's a really fantastic build. Not many people build rock crushers, but I think you hit it out of the park. It sure looks like a beast. Great job!
I'm loving this build... your really 'crushing' it.
.
.
.
.
I'll let my self out
Exactly my thinking !
can you keep the door open for me !!
Lol!
Wish I could lay down perfect welds like Donn. 👍
They're not perfect. I'm no professional welder. 😉😁 But thank you!
It's very satisfying to watch your welding work and skills. The result looks perfect! Tervitused Soomest!😁
Tervitused Eestist!🤙
From North Alabama, USA. I have been following your channel for a long time and continue to throughly enjoy your videos…!
Your jaw rock crusher is gonna be built better than any you can buy from a manufacturer. It's looking great, excited to see the first crushed products dropping out the bottom.
Pretty cool build. I repair small crushers like this for Rocklabs and am in Nevada now doing that. For your jaws you may want to see if you can get some hardened AR plate. The rocks will destroy the mild steel and rebar in no time.
Watch for any deformation or cracks at the bottom, the pressure to crush rocks is incredible Great job, lots of work you have done.
Good to see your brother is still "voluntarily" donating his car parts.
I love it when your plan comes together :)
The A-Team was one of my favorite childhood TV shows. It’s appropriate for your shop!
Друг, делать то, что ты делаешь тебя сам Бог благословил! Очень круто!
Hi Donn,
Your skills are so darn impressive.
Beautiful work, just fantastic.
Thanks for the video, and I hope we're going to see some
crushing next week.
amazing mug!
"moin" or in hamburg "moin moin" is a north german variation of "morgen" (which is the short form of "guten morgen" --> good morning). but unlike "morgen" and "guten morgen" you can say "moin" / "moin moin" any time of the day as a greeting.
This was brought to us from a german. 😉
Mr chop is the best
Now this is a project I’m waiting to see work. Planning on building my own.
I hope to get it running this week. New video on Friday.👍
Yer craftsmanship gets better with each build bud. Im very impressed. You're a talented young fella. I love watching yer stuff. Keep up the good work!!! Casanova Pennsylvania out.
Да, этого парня уже не остановить!
6:56 Всегда рад видеть юмор в высококвалифицированной работе. 😀😀😀
this guy is as good or better than any builder on TH-cam.
All coming together, I bet many viewers would love to work with you, I do. Yes just to watch the welds so clean and amazing. I will sign up for class. I see weather not so nice, enjoy your time, big thanks....... :)
Weather getting colder indeed.
Ну как всегда на высоте привет с РК
good time of the day there are drawings of the crusher hello from Kazakhstan
I love your videos! I’ve gone back and watched them all!!👍🏼
Oi, you crazy man! Cheers!😁
@DonnDIY you should build a gantry crane for moving heavy items... Will free up floor space.
You beat me to it, I was going to suggest the same thing.
He said something about one on the way.
I'll have a proper gantry crane in my next workshop. If not in this life then maybe in the next one. 😁
Your welding getting pretty good!
Donn, the one man A-Team.
Hi, Donn!! We have a hurricane coming to town! (NE, USA) That is OK. You will not feel a thing! Love your work!! :-)
Hello friend🤝, everything is super, as always fascinating,I don't even rewind it very exciting and interesting 💪 😀 👍 👍 👍
Looks like a nice build. By the looks of the rust on that Peugeot, they must use salt on the roads in you part of Europe. No shortage here in Minnesota in the winter either. Lol
Here in Newfoundland its all rust buckets here as well
@@djsnowman06 gotta get one of them Labrador trucks.
Yes, lots of salt. All the cars rot eventually.
This build is totally awesome. Love how quickly you can put a trailer together. Maybe only slightly jealous? Excited for the next episode and then the next project!
Can't wait to see this thing in action!!
I liked you videos,,, I liked you job,,, plus you equipment,,,I loved,,,,, from Virginia
Looking good can't wait to see it finished.
Did some nice work again sir !
Love your " Moin Moin" mug!
And the trailer will make a nice mobile crushing system!
:-D
just over 5 minutes in. That is looking heavy duty
You are the A-Team!
Great video
Guter meister.
Like immer wieder
Lookin Pretty Good Man
BRAVO OTTIMO lavoro 👍👍👍
I think its already late, but I'm only found your channel now :)
On industrial application we used triple washers, then couple of springwasher and a nylock for all the screws. Otherwise the vibration will loosen all your bolts. We use Countersung headed screws from the inside, so it is flat with surface(it wear out later), and from the outside you can use the pneumatic wrench to tighten it up(the conical surfaces friction holding it without a key on the otherside). And when the jaw plates needed replacement, we just torch cutted the bolts, and replaced them.
Very nice. We shared this video on our homemade tools forum this week :)
Cheers!
Awesome 👍👍👍Thanks for sharing
Awesome build!
A-team baby!
THere is a neat little jaw crusher on display in Death Valley. A pack of cigarettes just fits in the jaw opening.
Thanks for the vids
Good work bro
Hello Donn very good you getting close to finish i like your work well done
Im' really always impressed in your videos for the perfection of welding work!!!
Nice drillpro tools 😀
Great work as always.
Very skilled , keep up the excellent work and content . From U.K. .
Looking great! Enjoying watching all of your builds
Молодец. Прекрасная работа.
A-team are the best !!!
It's really coming together now!
Great fab work man!!
love it too watch.
Looking good. The home stretch...
Mr. T approves of the song playing in your head.
That is really awesome....can't wait to see the next one.
Man that looks great
Комментарий в поддержку видео и канала, а также труда мастера.
Grande Mr Chop!!
Great job, waiting for next episode👍
I have made one many years ago , there is a scrap yard near I was living and this scrap yard is the only one for several mills around so everyone go there selling their scraps metals, I went there from time to time sneaking in the scrap for valuable and I found some plates from an old stone crusher, I got them for about 30 $ . Couple years later I made a stone crusher when I found an excentrique shaft at the same scrap yard .
You would make a great neighbour 😃
Perfect work bro 🤞🙏🙏
Hey Don great update as always. About the hole saws, instead of hole saws you could try annular cutters. They are more expensive but also way better suited for thicker materials and you can cut more aggresive with them. Greetings from the Netherlands, Mark
Very interesting Mark. I was surprised to see him using a hole saw but until today I've never heard of an Annular Cutter, thank you. I need one of these magnetic mount machines.
Looking good, dancing great 👍
Love your videos. Looking forward to the crushing end.
I bet you could find some hub rings to adapt those wheels. Audi uses 5x112 also but I think maybe a larger hub. Porsche and Bentley. At least it’s not too big! I have a MK7 golf too lol
Great !!!!!!! 👍👍👍
Can’t wait to see the aftermath!
Yer crushin' it! FR
Good looking unit
Mantap asic Brow 👍🙏🇮🇩
great job
I like the face you drew on your chop saw Donny, I was laughing as he opened and closed his mouth when you cut your material.. Lol! :D
Greetings from Czech Republic. Nice video, I have the same engine in my home tractor.
Hey, cheers. Let's hope it lasts.💪
I like your work looks right to me...
Молодец! Как всегда круто!
Great theme song. And do you love it when a plan comes together? A-Team.
I do love it.
With the rock crusher taking priority on completion of the ATV, I'm guessing the shop expansion may be happening sooner than later? Regardless, I look forward to seeing this machine work.
No worries, UTV will return soon. Shop expansion has to wait. 😉
ok, im subbing your channel and a thumbs up... love this..
very nice work!
сварка у него лютая!!!