Gotek drive - Flash Floppy custom firmware install and OLED / Sound mods (Amiga, Atari)
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- If you feel like supporting my channel; purchasing the items featured in this video using the links below will result in me receiving a small commission fee - all items are Prime eligible so whilst they may be slightly more expensive than from other suppliers, you will get them next day and you can get on with your project!
Thanks!
Gotek drive - amzn.to/2yv8ZTM
OLED Display (Suggested) - amzn.to/2fYLJpu
OLED Display (Larger) - amzn.to/2kvBYk4
Piezo Transducer (Hack required) - amzn.to/2fYMxe0
Software required…
Flash Floppy Wiki:
github.com/kei...
Flash Floppy Download:
github.com/kei...
ST Flasher program download:
www.st.com/en/d...
HxC Download:
hxc2001.com/dow...
Please see the timestamps below for relevant parts…
Programmer setup 4:30
Software download and flashing 9:40
USB drive setup 14:00
Testing 15:25
Mods 18:30
When kapton tape's the tape you use because that's what you have laying around, you're my kind of people
Haha! Cheers pal!
I've just recently bought an Amiga (first miggy in over 10yrs) and added a Gotek drive with the OLED and control knob. I was having a few issues getting the file selector working correctly, so this vid has helped me with that. Cheers!
Starting in 2021, Gotek drives come with Artery microcontrollers. You need to use the Artery ISP programming software, but can still use the same serial programmer shown in your video. Wish I could like this video multiple times. Nice work.
2021 - Firing up my old A1200 for fun - this was the BEST tutorial on Amiga, GOTEK and flashing it. Thank you Kris.
Great video. I've been trawling through old guides. Now I have a clear direction. Thanks.
Holy. After 4h of searching for a failure I finally found out - that the brand new OLED display from China was out of order. I ordered 5 of them, and yeah, Murphy was there and gave me exactly the single one to try with not working. ;-)
Thanks A LOT for your tutorial, really impressive!
Still useful in 2024! Thanks a lot 👍🏼
Finally got around to flashing my Gotek and it worked! My USB to serial programmer's pinouts were slightly different as you indicated in the video. Adding the LCD display was so easy. My ribbon cable's red marking was toward the power cabling, which differs from yours. The only issue I had was with the HxC files. I had to go get a newer release because the ones you linked would not work, but the new versions worked perfectly. I threw Shadow of the Beast ADFs on my flash drive and had lots of fun. Thank you very much for your video.
No worries at all!
That processor in the floppy emulator is probably more powerful than the 68000 in my Amiga.
Same here, i'm using that ARM beast to be a drive controller on an A7000+ acorn archimedes lol. Should be the other way around. :)
Sure it is. It has 1.25DMIPS/MHz core running up to 72MHz. That's roughly 100 Dhrystone MIPS. 68000 has roughly 0.2DMIPS/MHz (and 7MHz inside A500/A600) and even 020 or 030 can't really compete with ARM there. But... since ARM is as pure RISC as you can have it also means it usually takes more instructions to make same job done. And Dhrystone isn't exactly the best performance marker anyway. But honestly that floppy emulator in it's purest raw performance is like a beast tamed by a kitty (amiga). If there's pin compatible F4 it most likely would be faster than even 060 since it also has FPU (well no direct comparison to 060 fpu) and runs at speeds of 180MHz. So... yeah.
Thank you Sir! Just done mine - it was knowing how to set the USB bit that confused me. I managed with terrible soldering skills to get some pins on the Gotek. All working lovely, and I have Lemmings setup like you!
This guide is by far the best one. Simply put and no fuss explained so that everyone can do this.
I bought a Gotek some time ago and had yet to set it up.
Mine came with no segment led, bought it direct from the suppliers so no firmware etc so I will be fitting this OLed screen. Why its not a standard feature is odd.
Super video, thanks for taking the time to make it for the community!
simple, straightforward, with videos and a cool accent.....plus plus plus and plus.....thanks
I have one of these racing towards me atm in the mail and face the daunting task of making it work with a Kaypro 4/83. Woohoo! Wish me luck.
Did you get it working alright?
Just flashed my Gotek after watching this video thank you.
Kris, thank you very much for this video. I'll just add that you don't need to solder the lower pins (the group of 4 pins). In fact, it is a lot easier to solder just the top 5 pins.
Thanks for that. I thought I was going nuts! I tried the OLED option as well as the LCD/I2C-backpack options (with appropriate changes to FF.CFG) and nothing seemed to work except the original 7-segment displays. Turns out, whoever created the circuit diagram I was working from had the data and clock lines arse-about! At some point I switched them but I may have omitted to reset and by that time, was starting to suspect my hardware (eg. dodgy hookup cables perhaps). All looking good now, thanks to your mentioning which one was SCL.
Just watched this video and I`d like to say thanks, I`m a bit late in the Amiga catch up but this has help me alot :)
Kind of makes me wish I still had my old Commodore 128 or even my SX64, they were great machines in their day and this thing would replace the huge box of 5 1/4 inch floppies that I had filled with nearly every game or utility I ever found was made for the machines. I sold my SX and box of floppies for enough money to purchase a NEW laptop a few years back, their value is still holding at much more then they cost even in their hayday!
Very good explanation. I just flashed and installed a Gotek drive in an old Amiga 500. Very appreciated.
Thank you for this Kris. I just flashed two drives following your guide. This is foolproof in my book. Thanks again!
Hi, just want to add for me to get this to work I had to add two pull up resistors to the Rx/Tx lines otherwise it just would not connect to the Gotek, great thorough video btw
Hi Brian, how big were the resistors you used to fix a problem?
**Just a note that might help someone else.** I have a Gotek SFRC922D card, FTDI232 USB serial device, Windows 10, and the latest version of ST - Flash Loader Demonstrator (as of 9/16/2020). I could not get the ST flash software to connect to the Gotek until I wired in a couple of pull up resistors on the TX and RX lines which is most likely due to a shortcoming in the FTDI serial interface. This potential problem is discussed on the Flash Floppy "Firmware-programming" page. Rather than go to the trouble of soldering the pull up resistors to the GoTek board, I used a bread board and connected a 10k pullup resistor to each of the com lines there and wired the Vcc from the FTDI through the breadboard as well (5 volts) for the pullup supply.. This solved the connection problem and the flash process was successful.
Hi Kriss, thanks for the video i have just flashed mine and put an oled display works a charm thanks again
An excellent video - nicely paced and well explained. I have just bought one but I can see myself buying several for my retro computers and my Roland keyboard. Many thanks for this.
Lovely Video... Gotek, which I'm gonna use for my BBC B is now programmed with flashfloppy-v2.14.
I had the same programmer as you. Not sure I got two LEDs on the USB Programmer, but it worked a treat.... COM5 for me
Well done chap, thoroughly enjoyed it
Glad you enjoyed it
this is pretty good, i'm hoping to do this mod sooner rather than later :)
great vid. I will be using this when my Gotek arrives. thank you
WOW!! What a well explained Video! Parts now in the post after pulling 20 Year old DOS PC's from the Loft as bored with lockdown :-( Should keep me happy/busy for some time :-) Thanks!
Nostalgia, brilliant video Kris. Thank you
kris thats great. i need to get one of these and have wondered about the bits and pieces needed for the OLED and piezo. and the firmware thing helps heaps!!!!!! thanks mate
If you get an OLED screen, make sure it's IIC.
Great video, very well done, could not have explained better myself!!
Nice one Kris - I had pre bought the bits ages ago to do the firmware hack and the LED replacement and drive click but hadn't done so because I knew I would have to get all the info from the different places I had seen but you've got it all in the one place for me and I'll crack on now :)
+skilgannon1971 Fantastic pal...let me know if you have any trouble and I'll try and help you out.
Thanks Kris :)
Extremely helpful tutorial. Thank you!
Perfectly explained.
Thank you very much Sr.
You sir are gold. Thank you for the video. Step by step guide allowing myself and others to pause when needed. Very easy to follow .Thumbs up from me/Like and subscribed 👍🎖
Really great tutorial mate. Helped me 100%. Cheers.
thanx for the video ..very simple and well explained. I am waiting for my drive to come in the post
This is great. It's so clear.
Fantastic vid, very easy to understand! Kudos!
Just done the oled mod thanks for your help
+Mark Gault No worries Mark!
Excellent, well explained video. Thank you very much. Will be checking out the mods too.
Great video man, absolutely great.
People who give thumbs down should be made to explain themselves. Dirty goings on there
+772pcs Haha it doesn't bother me...would be nice if they said why though. I usually get folk saying I say errrrm too much, that's the usual negative comment lol
You know, some people are clumsy, others are sleepy, or somewhat drunk.
100% dirty goings. This happens on a lot of sites. I think thumbs down should REQUIRE comment!
@@perplexedmoth Or dumb!
Super informative video! Thanks so much :)
Great video. First video of your's I've seen. If was perfectly easy to follow. Only thing I would have added would have been to mention the other systems besides the Amiga this can be used for. BUt the site's you linked does that so no big deal.
Man, you made it look really simple👍🏻
it is really simple
Cool! many thanks for the info! i Enjoyed it a lot man!
Fantastic! Thank you very much for share!
Best guide thus far!
thanks for your help, i have install flashfloppy and oled and work perfect
Well laid out and explained!!!
Would love to see a video for us Linux users. Great info nonetheless!
Thank you for your excellent video with vivid vidography and crystal clear audio. I have a question; I just want to use the Gotek on a Techincs Music Keyboard and I want to have the OLED display for ease of finding files. Do I still need all three software downloads you mentioned?
Very very nice and easy to understand video! Love it! Greetings from germany. Your Doktor64!
Ace tutorial. Good work mate!
At 4:40 you say you'll need the (new) header in cojunction with the power connector to programm the Gotek. At 7:00 you explain how to connect. But the power-connector is directly connected to the (new) header. So you can use those pins to. I made a (fool proof) connector for these pins wich not only send the flash-data but also power the Gotek.
G'day from Tasmania, best description on youtube that I've seen, and I have been watching heaps. Just got myself an Atari, must be second childhood as I'm 84. Anyway, could you tell me if it is much different doing this for an Atari than for Amiga. Have just ordered a Gotek and I don't want to stuff it up. I had an Amiga about a hundred years ago and would like to play some of the games I remember, these modern games are too fast for me. Anyway thanks for the info in this video.!!
Thank you so much 😊
Thank you. Followed your video and flashed my Gotek and connected OLED. Now the question is how to gently cut A1200 case for Oled :)
Excellent guide !! Thanks
Superb overview and tutorial ! Many thanks !
No matter what I tried, my Gotek just wouldn't respond to the ST Flasher program. It got stuck in a loop of "Unrecognized response" and "No response from the target". I ended up using this tool instead:
sourceforge.net/projects/stm32flash/
Check connectivity
stm32flash.exe COM22
Enable read
stm32flash.exe -k COM22
Enable write
stm32flash.exe -u COM22
Write Flash Floppy image
stm32flash.exe -w "c:\path to\FF_Gotek-v0.xx.hex" COM22
Excellent video guide. Thanks for your clear explanation. The hardware aspect was spot on for me. Just my particular drive doesn't like the flash software. Hope this helps someone.
great video mate, cheers
The ARM CPU on the drive could probably emulate the whole Amiga.
The problem about this emulator is that’s is doesn’t go back in the number on the display, if you are for example in the 10 and you need to go back to number 8 for example there’s no way only turn in off the device our restar the keyboard...
Excellent Vid! sub gained!
Wow, just what I needed, great thorough video, for some reason I'm not able to communicate with my gotek using the flash loader software always gives me 'no response from the target, boot loader can not be started etc' any ideas? can't seem to fathom it out, device seems to work as intended
I enjoyed this !
Thank you very much Kris. I learned a lot from your video. I do have a couple of questions. Can you please number the pins and screen cap a little schematic of how to connect the OLED in detail. Also what's the red LED for. ?
You got my thumbs up xD
Great video! I want to put this Gotek into 2 of my vintage synths. Where did you get those jumpers at 7:40,if I deciede to go with the mods make it work from 36 pin to 24pin inputs? Kind regards.
nice job! in there a way to flash the configs to track0 of the Gotek like that of the Cortex based firmware ?
Are there more currently available displays? I would like to do this to mine, but it has to be as easy as yours was!
Thank you very much your this video, I lost communication with stm because the dfu driver not correct functioning on my computer, only wipe the old dump but can not write the new. Computer tell me continuous foreign parts. The straight to RX and TX line with ftdi serial converter I can reflash, and STM processor back to the business.Thanks again.
Kris, Great info video. Following your steps. But you gloss over a major point. At about minute 12:15 you mention com ports. How do we find what com port to use? I show Com 1,2 & 5 available from the DemoLoader but none connect to the USB-2-TTL I have. On another computer, I show zero com ports from the DemoLoader program with it connected. Also I get no power led on the Gotek itself. It is hard to tell what LED's you are talking about. You show no picture of the USB-2-TTL powered up with the Gotek. Suggestions? Thanks KLund1
Hi, thank you very much, now I've a working Gotek with its LCD screen. I've tried some different game, but not all are working. Is there a compatibility list or is an issue with my roms? i.e. Great Giana Sister isn't working, Twin World is working.
The red wire of the floppy flat-cable connector (pin 1) should be on the other side?! Having the red wire on the side where the power is connected has been a defacto standard for decades. It's very confusing seeing it connected like it is in this video, but I suspect it is connected wrong on the motherboard too. It would not work otherwise?!
People can potentially break the hardware if they would connect it this way.
This item is not being delivered to the United States according to the vendor. Any sources for US delivery?
great video and very clear. I already have one of these GOTEK drives on my MIRAGE keyboard. It already has FF on it, I learned that from your video with the F-F showing at the start.
There are 300 disk images on the pen drive, but the display will only show 257 of them before going back to 000. IS there a way to get it to update and read all the files
thanks
Hi Kris, I loved your video.
I've just bought a Gotec SFRC922D for my old Ensoniq SD1 Synth. This device has an old 720kb FDD with and old Sony pinout configuration. Can you advise me on upgrading it?
Sadly, it's true that these old floppies are rapidly deteriorating. I recently fired up my old Amiga 1200 for the first time in a while and about a third of my floppy games wouldn't even get to the load screen. Luckily, the vast majority of those old games have been converted into D64 files!
What SIZE piezo transducer are you using? (Great vid, by the way...)
share the link of AliExpress to the exact usb programmer
it doesnt say where the jumpers should be so i dnt know if they are set right
Goodnight. I am from Brazil. I need help. I installed the Gotek SFRM72-FU-DL on the Yamaha PSR620 Keyboard, and it is not working correctly, I created 10 virtual disks on the pendrive, using the Floppy Manege software, Gotek only recognizes disk 000, it does not read the other created disks. I need to know if I have to put the FF.CFG and img.CFG files in the root of my pendrive?
After soldering the 9 pin header, connecting the jumper and following your wiring description, when connected to the pc, I have no gotek display? Disconnect all the wires, and voila! Display is back on. Is the 9 pin header related to the display output?
How do you get that screen to appear on the amiga @16:47 ? Mine just boots into the Amiga desktop from the internal hard drive.
A terrific video, I don't own an amiga, so will this work with PC?
Trying to connect a gotek to an oric atmos - ive flashed the gotek with flash floppy 2.14 - set up the thumb drive............. but how do i connect the ribbon cable to the oric - the oric port is slotted so the cable will only go in 1 way , but what way do i connect the ribbon cable to the gotek !!! - if i plug it in the wrong way round it will probably kill the oric and the gotek - really appreciate any help on this - cheers man
Great video! I am hoping this will work on my Roland XP 50. The XP 50 somehow works differently to other Rolands, hence the need for a modification. Anyone had success with a XP 50?
Is there any restriction on the GOTEK firmware in order for the buzzer to work? I've got v1.05a firmware GOTEK installed in an Amiga 600, and connected a buzzer (like you did), but still no buzzer sound.... The sound (track sound) is enabled in the settings menu too. Any ideas? Thank you in advance :-)
The same question also goes for the use of an OLED display. Do I need to upgrade firmware to a newer version etc?
I have the same Gotek and bought the same (0.91") display to replace the segment led display. I connected the cables exactly as shown in the video, but the display doesn't come on. And, of course, I have no way to check if its a problem with the display.
I'm just wondering - Is it necessary to flash the firmwre update in order for the oled display to work? Or can it just be installed by changing the pin outs?
Hi Kris. Nice instruction. I need help about using this device on my injection moulding machine, Arburg. Can you help about that??
Mine is booting from the usb intermittently. I can not get it to consistently boot/load from the usb drive. I have tried flashing updated firmware as well for the gotek nothing seems to help. Do you have any suggestions?
can you run a usb cable directly from a installed geotek to a pc and archive to it?
Thanks for sharing. Do you have detailed instructions on how to physically install this on a S950?
Hey, Can all this modding, flashing and soldering be done for pc use? Or only Amigas?
Hi, just want to know, what model of USB Emulator suitable to Yamaha electone EL90?