How to Fix Mitutoyo Calipers Dashes Flashing on Display After Replacing Batteries | Digimatic
ฝัง
- เผยแพร่เมื่อ 4 ธ.ค. 2020
- After replacing a dead battery in my Mitutoyo calipers, with a fresh new good quality battery - amzn.to/2LpK6Rn - the display started flashing with dashes, and no amount of button pressing would make it go away. I had to do a little research to find out that the way to get rid of the dashes is to do a hard reset.
Push the ORIGIN button and hold it for more than one second, until the flashing dashes disappear, and the screen shows a normal reading. Then the Mitutoyo calipers will operate normally again.
Buy only good quality replacement #357/303 (Sr44sw) watch batteries - amzn.to/2LpK6Rn
Buy the 6" Mitutoyo Calipers here - amzn.to/3txy8q8
Buy the 8" Mitutoyo Calipers here - amzn.to/39VilJC
How to Fix Mitutoyo Calipers Dashes Flashing on Display
#calipers #mitutoyo #engineer #measurement
The products shown here were purchased by me with the intent to use them. I did not receive any free items, and I am not being paid or compensated for this review. The video and description may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, crafting, and DIY. - แนวปฏิบัติและการใช้ชีวิต
Quick Tip: Use an object to help press the button harder. Finally got mine going just now after years of flashing. UNREAL
you're right
thanx, that worked for me also :)
Thank you for a simple, direct, clear video.
Your welcome 🤗
Thousands of dollars of new equipment depending on my calipers and the dashes kept blinking. You, Sir, saved us a lot of $. Thanks for a straight to the point video.
Great success!
Well done !!! I got the same problem. Bought two new batteries and face similar problem. Chance upon this and it's settled and ready to Work !!!
OMG I thought I had broken my calipers. Thank you SOOOOOOOOOO much for posting this!!!!
Just an update, I had another go this morning….after a few unsuccessful attempts with my finger/nail….. I pressed harder with key…..bingo!!, it worked👏
Thanks again for your most helpful video….. and have a great 2024.
Thank you! You saved me from buying a new one. Subscribed.
Thank you!!! Short, sweet, and to the point!
This is exactly of how you make a good video. It gets to the point quickly and solves the problem. A++++
Appreciate the video! Was doing calibrations at work and this helped a ton. Thank you very much
Good fix, well done, thought my callipers were dead. Many thanks.
Thanks a lot your video saved lot of trouble of mine. 3 years before i have purchased original Mitutoyo vernier caliper , used it for 2 or 3 times and then kept packed for nearly 3 years and now when i took it out battery found dead hence i replaced it with LR 44 but the problem of flickering dash occurred. As i am in small town it is difficult to obtain SR 44 battery ( thinking that caliper need only SR 44 ) but your video instantly solved my problem. Thanks.
Thumbs Up ! For sure, very simple well explained video. having trouble with my Calipers, will give it a try. Thank you very much
Thank you. I’ve been using this type for 40 years. Different upgrades over that time. I long ago lost the books, boxes.
Your welcome 🤗
It is a clear video that helped me. Short and good. Good work.
Thanks, so much. I pressed (and held) every button except the origin button. You saved me from buying a bunch of battieries.
I did the same before learning this trick. Was very frustrating, so I made the video to share.
You just saved my life! I'm in a work travel and I thought it was broken forever!
Nice 👍
Thank you very much. Appreciate your straight to the point and short video
Your welcome!
I think that procedure comes on a sticker on the back of recent models, though it doesn't specifically mention blinking dashes.
thank you very much. I have the same issue with my Mitutoyo caliper. By viewing your video I just fixed it. thank you.:)
Very help full, today I have same issue, rectifying your guide, thanks Sir
Excellent fix! Thank you!
Thanks for the help. I have been trying to figure this out the whole day.
Your welcome 🤗
Omg thank you!!! This was invaluable!
This is very helpful...thanks for posting!
Thanks for the help. I was very confused with it ,, now happy
Thank you sir! Direct and to the point :)
Man you’re goat. Thank you. I was thinking my Mitutoyo is dead. And I was going to throw as garbage. Thanks man.
You saved my calipers from the trash can!
Thank you I couldn’t have done it without it you make great videos
This is exactly what I needed! Thanks!
Your welcome!
Thanks man. You fixed my calipers.
thank you!! Helped me out today at my work!!!
Thanks for the fix. Works great now.
Thank you very much. Thought mine was broken. It worked for me.
Thank you! I swear I tried this fix before but it sure worked this time.
Thank you for this video. Very helpful !!!
Legend, saved me a bunch of head scratching. Thanks!
Good looking out! Thanks
Thanks, this video is really helpful! 😁
Thanks my dude! You saved me time and money 🎉
I just got same situation. Thank you for video
You saved the day. Thank you!!!
This fixed my problem, thanks a lot !!!
Awesome, problem solved, thanks for posting.
thank you for this video mate!
Very helpful, thank you!
Thank you. Much appreciated.
Thanks, the fix worked perfectly
Thank you for the tip....outstanding video
nice video first I thought of going through the manual. This video is more helpful.
Thanks for the help, was gonna buy new batteries but this is much faster lol
Thanks man, you just saved my day
Thanks for the info.
Awesome, Thank You Very Much!
this helped me out..thanks!
THank you!!!! such a help.
Yep I just needed something to press the object button down I wasn't getting it with my fingernail thank you very much for the video
Great success!
thank you.. this solved my problem
Have a like, this was a well-presented quick and easy fix.
Very helpful thank you
Brilliant, many thanks
Thanks for your information,, the problem was solve,,
It happened to mine yesterday. Thanks.
Thankyou bro I appreciate you.
Thank you very much👍
Thank you so much!!
Really Helpful
Thank you, that worked.
Thank you, good sir.
Good video... Helpful
Thanks just fixed my mitutoyo.
Thanks a lot bro .....I was facing the same issue with my caliper
Your welcome!
Thank you very much!!!
Thank you
very helpful, thank you
Thank You!
Thanks buddy, that was very helpful!
Your welcome!
Thank you very much! You saved my day!
You're welcome!
Big help thanks
THANK YOU!
My vernier has been flashing for more than 3 days. Haha thank you very much
Thanks for tricks
Thank you brother!!!!
Thx man. You help me a lot
Thanks worked for me.
Thank you!!
Thanks
Thank you!
Thank you, now I can stop pulling out what little hair I have left.
Thank you. 👍
Thanks you
Thanks mate appreciate it
Thx. It fixed my Mitutoyo 🙂
Welcome 👍
thank you very much
Thanksalot… You save the day
Thanks for the fix
Your welcome!
Thanks!!
thank you brother
Thank you sir!!