Solar mini grid system ya solar company jo epc ka tender government se leti hai for I&C uske interview se related questions per video banaye jo ki ek mnc company ek experienced candidate (solar I&C) se kiya ja sakta hai...jaise ki cuf, pr etc.. Plant size calculations, sld,
Sir i have 2kw on grid solar plant at home with havells enviro gti 2200 inverter. The penels are clean , no Shadow at all. Angel is perfect. Still receive only 1130 watt maximum power from 2kw plant.. should it be producing around 1.5kw.? What could be the problem.. its been 3 days since i installed that plant
Hi Ali , your observation is absolutely correct , there are actually 2 different PR calculated 1) (location indipendent value) i.e. PR before installation through pv syst in which we use online Radiation value , it usually differs . 2) ( location Dependent value) were Radiation sensor installed on the site gives accurate information of PR. I hope I cleared your doubt
Thanks for replying , wont the pvsyst have different values for different regions when we put in the lattitude and longitude ? I mean it wont be a universal value , so it will mean that the PR does depend on location .
Dear sir.. Mai apka sab video dekti hu.. Sir mera ek problem ho raha hai 1kw solar plant Or 100kw solar plant 1din Or 1year me kitna electricity generate karega east, south, all faces please explain calculation
My plant of 20 kw was installed 25 days earlier but After cleaning my panels 2 days ago the generation earlier was 96-106 unis ,but after cleaning it reduced to 75-86 units .what may be the reason.
well it will depend , what resolution you have set , to record the data, decimal can always be rounded off , and yes in no grid condition the PR will go down
Also, according to PVSYST the efficiency in the denominator of your equation depends on losses, not module efficiency (forum.pvsyst.com/viewtopic.php?t=31). Could you clarify? Could you also tell what is the importance of Capacity factor of a plant? Why not tell everything in terms of PR?
मान लीजिए मेरा प्लांट 100 मेगावाट का है और मैं उसका पीआर टेस्ट निकालना चाहता हूं तो कैसे निकाल लूंगा किस बेस पर मुझे डेली pr नहीं चाहिए जैसे कि 100 मेगा वाट का pr कितना आना चाहिए और इस प्रकार उसका एक एक्चुअल pr कितना होता है उसके बारे में बताइए जिसे पी जी टेस्ट भी कहते हैं
Kisi bhi solar plant ka PR decide keya jata hai after conducting PR test when plant run on 100% capacity , this test is conducted for 5 to 6 days and the average value PR is decided , Before PR test weather forecast is done so that radiation ramain aproxx uniform throughout 6days of test , for 100mw we have plant that maintain a PR of 79%
@@SustainableEveryDay 1. how do we add/calculate temperature correction? 2. can I use the PR formula on a 15 minutes basis? does it mean that I do not need to calculate avg of irradiation just take the value?
your videos are very informative and your way of explaining makes them easy to understand, thanks
Thanks to all team
Very nice video
Sir, superb, you are nicely explained.
Thanks for the support
Very good job 👍
Thanks for the support
Thanks for the valuable info💐
Sir the video you provide very clear and informative plz send me the Excel
Hi let's connect on LinkedIn from video discription
Helpful, thanks.
Thanks for the support
Solar mini grid system ya solar company jo epc ka tender government se leti hai for I&C uske interview se related questions per video banaye jo ki ek mnc company ek experienced candidate (solar I&C) se kiya ja sakta hai...jaise ki cuf, pr etc.. Plant size calculations, sld,
Absolutely Aditya, brilliant idea I will definitely upload a video on this , thanks
How to calculate plan availability and grid loss Generation formulas sir pls
Sir i have 2kw on grid solar plant at home with havells enviro gti 2200 inverter. The penels are clean , no Shadow at all. Angel is perfect. Still receive only 1130 watt maximum power from 2kw plant.. should it be producing around 1.5kw.? What could be the problem.. its been 3 days since i installed that plant
Can you please make an video on CUF ? What is it and what does it indicates ? What should be minimum CUF ?
th-cam.com/video/aIKPOoaoGPk/w-d-xo.html
Sir, thanks for breif explanation. Plz share me the link to know the irradiance according to the area.
Share your email
Very valuable information, can you share me the excel data sheets
Good information
thanx for the support
Hello , the solar radiation will vary with location , so how is the PR independant of location? Please correct me if i am wrong .
Hi Ali , your observation is absolutely correct , there are actually 2 different PR calculated
1) (location indipendent value) i.e. PR before installation through pv syst in which we use online Radiation value , it usually differs .
2) ( location Dependent value) were Radiation sensor installed on the site gives accurate information of PR.
I hope I cleared your doubt
Thanks for replying , wont the pvsyst have different values for different regions when we put in the lattitude and longitude ? I mean it wont be a universal value , so it will mean that the PR does depend on location .
Correct
great sir
Thanks
Dear sir.. Mai apka sab video dekti hu.. Sir mera ek problem ho raha hai 1kw solar plant Or 100kw solar plant 1din Or 1year me kitna electricity generate karega east, south, all faces please explain calculation
I think it is better to create 2 separated videos for each language..
Correct I will upload soon
thank you
My plant of 20 kw was installed 25 days earlier but After cleaning my panels 2 days ago the generation earlier was 96-106 unis ,but after cleaning it reduced to 75-86 units .what may be the reason.
One string got disconnected
Sir please fwd the details as per ur video for PR related calculation
Good job
Thanks sir
Thanks for the support
really helpful
plz share the downloadable excel file
Hey msg me on LinkedIn
Hello. You can say me how to evaluate PR. How can i know the result of PR calculated is true. Thank you very much
If we don't have grid for half day than the pr ratio should be around 48 and not in decimal numbers can you explain my confusion
well it will depend , what resolution you have set , to record the data, decimal can always be rounded off , and yes in no grid condition the PR will go down
How could irradiation for one day is 247 kWh/M2 !!
It must be W/M2 !
PR can not be 97%
Instantaneous irridiance is w/m2 , but the whole day value is in kw/m2
Sir if u have any pdf calculation solar generation plant pr ratio
Can I get this excel sheet?I want to practice own
Love u bro ..kindly share
Please connect with me on LinkedIn
@@SustainableEveryDay how do i connect with you on Linkedin?
Sir can give us file of basic viva or interview questions asked on the solar system it will be usefull for us.
Sir mera plant 901kw ka he to PR deacrese ho raha he to kya krna padega ???
81 chahia lekin abhi 79 ho gya
Shadow , aur cleaning ka kya schedule hai
@@SustainableEveryDay month me 3 bar cycle lekin dust he
Dust bahot raheta he
Sir i have 6 megawatt plant how much daily generation
Do you have PvSyst report
Dear sir... 1kw solar plan 1din me kitna generate karega, 100kw 1din me kitna karega... Calculation kaise kare sir... Please help me 🙏
video is quite helpful, could you please provide the excel file ?
Sure please ping me on LinkedIn
नए इस्टैबलिश्ड प्लांट में पीआर टेस्टिंग कैसे होती है सर इसके बारे में बताइए जिस पर हम pr टेस्ट करते हैं वह क्या प्रोसेस है
Can you explain weather corrected PR
hi sir can u explain inverter efficiency calculation
Plz
Share a pf ratio sheet..
Good information sir,
Kindly share excel to my mail.
Hi Rakesh please text me on LinkedIn or Instagram I will share it there
Sir kindly tell me what is the meaning of active line?
Power supply line
Sir,Where is the exeel sheet,Bcoz apnr jo link diya h uspe to imageses khulke aa rahi h bss,sheet nhi h
Plz share the excel sheet for PR calculation
Hi bro, I need this sheet. I have some doubts. Plz given the data with the Single module.
Share your email
Sir best for me PL send sheet
Could you explain how are the losses linked to the PR in your excel?
Also, according to PVSYST the efficiency in the denominator of your equation depends on losses, not module efficiency (forum.pvsyst.com/viewtopic.php?t=31). Could you clarify? Could you also tell what is the importance of Capacity factor of a plant? Why not tell everything in terms of PR?
Sir if u have any PDF of calculations of solar plant PR Ratio
how to calculate with the temperature to plant performance and generation
Himanshu ji please sahi tarike se Hindi me explain kijiye. Ek or thoda sahi video banana plz, pr par
Can you please share the sheet for calculation of PR
Share your email
enquiry.hastenpower@gmail.com
Also would like to know the differences in O&M of rooftop and ground mounted solar plant.
hi, kindly please share the performance ratios excel file
Video discription
can you please tell that how can i download the irradance by day wise and monthly wise.
It can be easily downloaded via your SCDA system in excel format
What are the types of DC fault?
Hello,
I tried to download file from link in description, but it gives an error saying file might have been deleted . Pls share file.
Message me on LinkedIn I will share the Excel file in msg box
Connect with me on Linkdln
www.linkedin.com/in/himanshu-tewari-58994413a
@@SustainableEveryDay oh, I am not on LinkedIn. Can you please send to sanketpatel@yahoo.com
PR. Aur CUF KO NIKALNE KA KOI ASSAN TARIKA BATAI SIR
Formula hai , aap ko google pe excel mil jayegi
How to calculate the instantaneous performance ratio of solar plants?
for that we need to capture instantaneous meter data as well as radiation data , only possible with PLC based offline SCADA
Thanks For Sharing, PL send sheet ♥
Please msg me on LinkedIn
Pls send the PR calculation Excel
Please share your mail ID
@@SustainableEveryDay karunanidhi081@gmail.com
@@rajshukla_official shared the excel file on mail
prakash.khade8@gmail.com
Dear sir pls share PR calculation sheet.....
Request for sheet on vilasthube18@gmail.com
Can u send me the excel file for calculating pr of panel
Which company you job sir. .?
Mahindra Susten Pvt Ltd Dubai
@@SustainableEveryDay ok sir...apki viedo bahut Achi he sir...main solar plant main he job karta hu
Hi, I was looking for the sheet in the link ,seems it's deleted. Can u share it with me plz
Message me on LinkedIn I will share the Excel file in msg box
Connect with me on Linkdln
www.linkedin.com/in/himanshu-tewari-9876976705/
Can you showing tilt and GHI
मान लीजिए मेरा प्लांट 100 मेगावाट का है और मैं उसका पीआर टेस्ट निकालना चाहता हूं तो कैसे निकाल लूंगा किस बेस पर मुझे डेली pr नहीं चाहिए जैसे कि 100 मेगा वाट का pr कितना आना चाहिए और इस प्रकार उसका एक एक्चुअल pr कितना होता है उसके बारे में बताइए
जिसे पी जी टेस्ट भी कहते हैं
Kisi bhi solar plant ka PR decide keya jata hai after conducting PR test when plant run on 100% capacity , this test is conducted for 5 to 6 days and the average value PR is decided , Before PR test weather forecast is done so that radiation ramain aproxx uniform throughout 6days of test , for 100mw we have plant that maintain a PR of 79%
hai sir
how are you sir
i want
PR% EXCEL sheet send me
Why PR is between 70 to 80% for most of the plants
practically 100% PR is only possible if the sunlight radiation is constant for morning to evening along with 100% availability of the plant
Why PR and CUF are inversely proportional?
Pl share excel sheet for PR ratiao
Hii guys ....can u send me formulation of
Global formula... Please help
Please ping me on LinkedIn
Sir excel sheet cannot be accessed
thank you sir please i requested to send this xl file to my mail id as soon as possible sir
PR%=total generation /(plant capacity *GHI value)*100
kindly requested to send this xl file to my mail id as soon as possible sir
Sure
Please share this Excel sheet🙏
How to calculate radiation by internet
I needed Excel pls
Hello pls can i hav excel file
Connect with me from video discription , i will share the details
Hi sir I want excell sheet
Check video discription
@@SustainableEveryDay I have already check the discretion I'm not found
Please share the excel file
Can you send me this excel file.
Dear sir please send me PR EXCEL SHEET
Hi please share your mail id
Send me the excel of performance ratio
Please mail Solar 5 MW Performance ratio formal and total no of module 15620
Sorry I don't have it
PR = (E/(plant DC capacity x avg irradiation))×100
Tiwari ji, is this also correct formula to find out PR?
Correct , also if you can add temperature correction it will be great
@@SustainableEveryDay
1. how do we add/calculate temperature correction?
2. can I use the PR formula on a 15 minutes basis? does it mean that I do not need to calculate avg of irradiation just take the value?
Hello share
Please share Excel sheet
i need this excel filee
Sir plz send Excel sheet
I have pinged you on LinkedIn . Kindly let me know
Please send the Exel
Hi Please find the details in video discription
kindly share the excel sheet please
Join us on Linkdln
www.linkedin.com/in/himanshu-tewari-sustainableeveryday
Join on Instagrm
instagram.com/sustainableeverydayy/
Pleaseshare me excell sheet sir
Sir Pls mail excel sheet.
Sir plz mail me PR calculation excel sheet
Please share the sheet
Please send me sir PR of solar plant
Please TXT me on LinkedIn
Send me excel sheet
Please send me this Excel file
Dear sir, please mail this excel sheet
Dear sir good explanation about PR.
Pls share excel sheet of this calculation.
please send me excel sir
I need the mail
Please
Send me this excel formula sheet
sdsaddam0239@gmail.com
Message me on LinkedIn I will share the Excel file in msg box
Connect with me on Linkdln
www.linkedin.com/in/himanshu-tewari-58994413a
@@SustainableEveryDay i try to send u msg but nai jara ap ko msg
Ap apna LinkedIn I'd share karo mai aap ko request bhejta hu
@@SustainableEveryDay han send kiya hi maine ap ko sdsaddam se
plz sir send me this sheet
Video is not clear sir