Dodge Charger - MIDDLE / CENTER CONSOLE INSTALLATION or REMOVAL (2011 - 2021)
ฝัง
- เผยแพร่เมื่อ 1 ก.ย. 2021
- Step-by-step guide on how to install / remove / replace the middle console on a Dodge Charger ex police sedan ( 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | SE | SXT | R/T | LIMITED | HEMI | 3.6L ).
Give me your support and join the channel:
/ @quitealright
In this video I have a previous police Dodge Charger that came without the oem center console. I am showing how to install the factory console and fit it in. I am not showing how to redo the wiring, just how to install the console itself. Middle console is mounted by 2 small phillips screws at the front of the console and four 8 mm screws at the back. If your Charger has a shifter on the top like mine, you will most likely have to get shifter trim bazel separately. Everything is explained in the video.
Thanks for watching.
If this video was helpful, don't forget to Like it and SUBSCRIBE to the channel!
⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
Power adapter that goes from Pursuit to stock civilian console is available on ebay and amazon.
Thanks for sharing
Great video
Thanks for posting
I have a 2014 charger rt that needs those 2 side panels by the shifter and the metal trim on top replaced,
Do you happens to know how are those called ?
Thanks again
No problem, you're welcome.
Side panels are called center console panel right side and left side.
Metal trim is called middle console gear shift panel trim.
Great video. How much did your salvage yard charge you for console with side pieces
Thanks. I think it was $150
@@QuiteAlright Dang. Good find. I just paid $400 but for the entire assembly.
@@JLCra87 Yea there is a local salvage where guys know me so I get extra good prices. They crush hundreds of cars monthly so they don't care too much about parts
@QuiteAlright Dang! Mine came without a center piece. I'm only finding them new for like $100+. The little storage bin with the electric port. Think you'd be able to get one? Send me a DM if you can. I'd definitely appreciate it. If not it's all good.
@@JLCra87 I'll take a look next time Im on car salvage and let you know if I find anything
do you know where the police vsim or pim module is on a 2014 dodge charger pursuit ?
There is a lot of videos for the 2011-14 videos
How did you install the shifter bezel tray? For some reason mine doesn't snap into place
It should just snap in, maybe you are missing some of the clips on the bezel tray
They are starting to sell crap so you have to cut some of the plastic away and sometimes file down clips.
Does the charger port inside the arm rest work?
It won't work unless you get all the correct wiring for it and reconnect everything. But again it depends what police mechanics did and how it looks. Every ex police car is a bit different depending on the department
Did you move the gear shifter as well? If u did how
Charger on the video is ex police so the shifter is up next to the steering wheel
Does the rear A/C works? or is it something that won’t work since it was a police unit?
It will not work, police charger is not equipped with it. The console that I got was from SXT which had rear climate control
It should work if you have the plastic pipe that goes to the unit. If you buy a aftermarket one new it comes with it
does it just snaps in or i'll have to mess around with it for it to fit?@@borgshark
That cover is on Amazon for $26 now
Do you have the link for that?
What is strange is my car is 2015. I bought a 2015 center from a junk yard and all of the wires are different!
Is your car ex police? If yes most likely you will have to get wiring for the console. depends on the department, but they often leave their own wiring inside when striping it and don't return the original
Can the column shifter be moved to floor for the 2018 police pursuit?
Hmmm I don't think so. It would probably be quite a challenge
Yes
Yes, it’s extremely easy
@@hedrasoliman6677where can I find out how
@@hedrasoliman6677can u tell us how?
I heard to get the rear climate control there is a foam sponge do you know how to remove the sponge or where it is?
Sorry don't have any knowledge on that. Try calling dodge dealer and asking for the part # explaining what you are looking for. They will have all the detailed diagrams
Can I put a 15+ console in a 2012
Hmmm I don't think so. 2015+ is after the facelift so probably they changed something. Your safe bet is 2011 - 2014
Damn okay I seen some people do it when they do swaps so I’m wondering what they did
@@Caine459 I mean with some modifying it can be done probably. I've just never done it. There could be only small differences such as mounting points or something bigger which will be a problem
I sell adapters on ebay for people that made the mismatch mistake. Happens all the time.
@@unclesamautos what’s the ebay
Man they really chopped your wires there. Luckily they left the Power outlets and USB/Audio jack on mine.
Yea it really depends on the department what they do, but usually they cut pretty much everything without thinking