How to remove the console on a Dodge Charger 2011-2023 7th Gen

[@ginob615]

Thank you! Best video by far!
If it helps anyone here is my step by step instructions for removal I'll be using today from a junked out charger hence the "cut" notes, as I intend to cut below the harness if I need to splice into my Persuit.
1. Trim tool separate shifter
2. T30 torx bit unscrew
3. Slip off shifter
4. Remove rubber cubby tray and shifter tray
5. Pry off shifter plate
6. Remove shifter connector
7. Unclip X2 shift connector wire clips (pic)
8. Unfasten orange cable x2 8mm bolts
9 7mm or phillips to remove cubby charger tray (pic)
10. Pull out charging cubby. Cut below 12v and audio connectors
11. Pop off side panells. Pry with trim tool up top if difficult.
12. 7mm or phillips to fully remove console from dash (pic)
13. Disconnect righr audio clip? (Tape to marc later and cut) (pic)
14. Remove rubber change tray in bottom console
15. Unbolt X4 8mm bolts
16. Slide back entire console
17. Flip it to unclip/cut wires
18. Unclip big harness and pull earlier wire cable through (pic)
19. Pull out back ac tube

[@s33therfan]

Thank you so much for the detailed instructions , much appreciated.

[@kolby3601]

Thanks I’m replacing those side panels so I have to remove that storage bin before I do or I’ll break the tab like you did?

[@patrickcrook8320]

Awesome vid! You happen to know the length of those 4 center console bolts?

[@StillFlyingSoulo]

When removing those trim pieces, you don’t have to become that gentle. They’re actually pretty easy to remove

[@dayslife]

👀👍🏼✔

[@s33therfan]

Thank you

[@mrrr407]

Damn here I am again on your channel . I did my starter with one of your videos now I need a center console 😂🫡

[@s33therfan]

I really appreciate you watching thank you.