@ononewheel7 I just finished tearing it down I want to build it back up over winter, going all out on this one. I plan on fully rebuilding the motor, fresh plastics , powder coat and can’t forget the suspension . Looking at getting some Elka stage 5 . I’d love to get into gncc but there isn’t any in New Brunswick Canada sadly
Love your videos! I have a couple questions! Since your fuel pump is always running, does it change anything for reliability? Does it wear out faster? Also what did he delete on this harness? He deletes the main relay in the back also? Would it work with a stock ecu or would I have errors? thanks!
I honestly think running it hot all the time does shorten the life of it. For my setup all the headlight and tail light wiring all the wiring for European models speed sensor,tip sensor, fuel pump relay,ais is eliminated. Jimmy can build then how ever you want i like to keep my fan relay and idiot lights and with this setup you need a vortex ecu.
Hi Joe, what brand of install did you use? Is there another alternative apart from OEM? What do you think of the Caltric brand? greetings from Argentina
Can you use the seat pins from 38 Motorsports with that sideways cage? All other “normal” cages I have seen can’t be used with those swag pins since they will hit the vortex
Its kind of similar as far as routing I’m not sure the carb model will have less connections since its not efi. Best bet is to grab a service manual if your unsure but im sure its not too hard to figure out.
Hey men, thanks for all your videos, pretty explanatory and excellent! Keep the hard job! Got 3 questions: (1) which brand of dielectric grease you used and why? and (2) where can I purchase your Vortex protector cage? Thanks a lot.
Ismael Ramon i will look at the name i forget the brand it was from autozone i use it to help keep all the connections from corroding it keeps moisture out! The vortex cage was from starlake fabrications but braaptech bought them out so you have to go threw them now or even check out ebay you may find some there!
I've been having an issue with my quad, the fuel pump isn't priming, already checked the relay and switched the tank to another quad to make sure the fuel pump worked witch it did, so don't know witch way to go now? New harness?
@@ononewheel7 its the little cable which goes under the sprocket, but i figured it out today by the way your videos are really nice i have almost finished my yfz, i used to ride with a ktm hybrid but since yamaha are the only ones manufacturing the quads im switching to a yfz. I also wanted to ask, what is your budget for a completely new quad?
Thanks man. This new one is like 25k between buying a brand new quad and setting it up this way. I actually bought every part brand new since when buying new there is a lot that you don’t use
@@ononewheel7 i message him. He hasn't gotten back to me yet im sure he's a busy dude im looking to get this bike on wheels before I leave for Texas in December any chance you could ask for me im willing to pay what ever cost asked for the job done thanks -Dan Allen
I have been looking for someone that will make a custom race wire harness for TRX450ER as I am doing a full rebuild. That Wired Out harness looks top notch. I also can't find a way to contact Jimmy Bartz to see if he is available to fabricate wire harness. It would be interesting to see if Jimmy has expanded his business or if this just a side job.
Hmmm thats a good one i guess for me the thing i break the most are the frames so i guess that would be it! Nothing else really on the quad that i can thing of now if i can stop hitting trees then ill be good 🤣
ononewheel7 I feel that in my soul😂 I bought my quad used and definitely abused; it’s got a sizable kink on a joint but it’s not cracked. Oh well🤷🏻♂️ But hey, if the trees are there to keep ya on your toes😂
Thanks for all the grate videos
Becuase of you I finish my quad. You gave me that inspiration
Anytime man glad i can help!
Keep up the good work man
Thank you glad i could inspire you 🤘
Literally perfect timing I might have to mess with mine in the next week love the the vids 🤟🏼
Thanks man!
ononewheel7 You’re welcome!
Awesome work, what Vortex cage was that again?
Its from Chris borning
Man your channel is so helpful been picking away at my 450x keep em coming 👍🏻
Nice man thanks for watching!
What are you doing to yours?
@ononewheel7 I just finished tearing it down I want to build it back up over winter, going all out on this one. I plan on fully rebuilding the motor, fresh plastics , powder coat and can’t forget the suspension . Looking at getting some Elka stage 5 . I’d love to get into gncc but there isn’t any in New Brunswick Canada sadly
Oh nice man! Is there any other racing close to you that you could hit up?
ononewheel7 sadly no
Bummer most of them for me are a 5hr lis drive for races!
Love your videos! I have a couple questions! Since your fuel pump is always running, does it change anything for reliability? Does it wear out faster? Also what did he delete on this harness? He deletes the main relay in the back also? Would it work with a stock ecu or would I have errors? thanks!
I honestly think running it hot all the time does shorten the life of it. For my setup all the headlight and tail light wiring all the wiring for European models speed sensor,tip sensor, fuel pump relay,ais is eliminated. Jimmy can build then how ever you want i like to keep my fan relay and idiot lights and with this setup you need a vortex ecu.
@@ononewheel7 awesome man! Thank you for the info 🤘🏻 Very appreciated
Anytime
Hi Joe, what brand of install did you use? Is there another alternative apart from OEM? What do you think of the Caltric brand? greetings from Argentina
I run harnesses from Wired Out Racing. If you just need a normal harness get an oem one.
@@ononewheel7 🙌🏻✊🏻
Can you use the seat pins from 38 Motorsports with that sideways cage? All other “normal” cages I have seen can’t be used with those swag pins since they will hit the vortex
Yes i do. I do not use the cotter pins in my xc setup. That is more for mx. But keep in mind w the seat pins the seat is not gna fall off.
I don’t use the cotter pins either. Just installed them to keep the seat from moving around so much and falling off like it was. Thanks for the help!
Anytime
Is the install on the carb model yfz harness the same as the fuel Injection?
Its kind of similar as far as routing I’m not sure the carb model will have less connections since its not efi. Best bet is to grab a service manual if your unsure but im sure its not too hard to figure out.
Can you do a video on hooking lights up for reference also does your buddy make a branded for carb models like 2007 450 se
In the fall i can when i reinstall my light/heated grips! He can make anything custom so reach out to him and see!
Hey men, thanks for all your videos, pretty explanatory and excellent! Keep the hard job!
Got 3 questions:
(1) which brand of dielectric grease you used and why? and
(2) where can I purchase your Vortex protector cage?
Thanks a lot.
Ismael Ramon i will look at the name i forget the brand it was from autozone i use it to help keep all the connections from corroding it keeps moisture out! The vortex cage was from starlake fabrications but braaptech bought them out so you have to go threw them now or even check out ebay you may find some there!
@@ononewheel7 thanks for your quick reply. Excellent job man!
Anytime and thanks!
On a quad that has stock harness are you literally taking every wire off? I’m getting a race cut over the winter.
This guy actually builds them from scratch now. Before he used to cut them.
I never heard of him. I’ll have to contact him. I was going to use raw connections
His name is Jimmy Bortz you can message him on ig and i think i left hos email in the description.
Where did you get your steel subframe ? Is it better then the stock subframe ?
It was from xcel racing
What’s the site for your harness? I need one for my 2010 yfz450.
Hes just on facebook/ig search jimmy bortz
I've been having an issue with my quad, the fuel pump isn't priming, already checked the relay and switched the tank to another quad to make sure the fuel pump worked witch it did, so don't know witch way to go now? New harness?
It maybe a broken wire. Was i talking to you on ig or messenger?
@@ononewheel7 yep that was me
How do you route the small cable next to the sprocket?
Which cable?
@@ononewheel7 its the little cable which goes under the sprocket, but i figured it out today by the way your videos are really nice i have almost finished my yfz, i used to ride with a ktm hybrid but since yamaha are the only ones manufacturing the quads im switching to a yfz. I also wanted to ask, what is your budget for a completely new quad?
Thanks man. This new one is like 25k between buying a brand new quad and setting it up this way. I actually bought every part brand new since when buying new there is a lot that you don’t use
Think he could fab up an 06 cr125 2stroke harness for me its a discontinued part from Honda and any help would be appreciated
You can message him on facebook and ask i know rite now he’s a ways out with orders rite now! Search jimmy bortz
@@ononewheel7 i message him. He hasn't gotten back to me yet im sure he's a busy dude im looking to get this bike on wheels before I leave for Texas in December any chance you could ask for me im willing to pay what ever cost asked for the job done thanks
-Dan Allen
I have been looking for someone that will make a custom race wire harness for TRX450ER as I am doing a full rebuild. That Wired Out harness looks top notch. I also can't find a way to contact Jimmy Bartz to see if he is available to fabricate wire harness. It would be interesting to see if Jimmy has expanded his business or if this just a side job.
He does do trx custom harnesses are you on facebook? Im not sure if i put his email in the description if not after work i will!
Are you going to the gncc next weekend?
No
Awesome video man
Thanks bud! Did you make it out this weekend?
ononewheel7 Yea had a blast me and one of my subscribers is everything ok with u I seen that picture man 😬
Awesome man! Ya i am good hill decided it didnt want me on it 🤣🤣🤣
ononewheel7 yea 😬 I seen that is the qaud good
Ya its fine!
Where u get that sub frame
This was from xcel racing i believe
I would love a kit like that for my raptor 660. Does he make it for that?
I looked for him on Facebook but having trouble. Can I have a link?
His name is jimmy bortz you would have to check with him on the 660 I’m sure he could! I should have left his info in the video description!
@@ononewheel7 I found him and sent a message but he never replied, might have went to his FB spam.
@@dudefromkeene i will pass along the message as well!
i have a 09 yfz450r and the sprocket hub has some play on the splines. any idea on what i need to do to fix it?
You can try tightening the axle nut 1st see if takes the play away! If not might be time for a new hub!
@@ononewheel7 thx for the info. I will try that.
Anytime man!
Hey man, what’s your least favorite part of a quad to maintenance
Hmmm thats a good one i guess for me the thing i break the most are the frames so i guess that would be it! Nothing else really on the quad that i can thing of now if i can stop hitting trees then ill be good 🤣
ononewheel7 I feel that in my soul😂 I bought my quad used and definitely abused; it’s got a sizable kink on a joint but it’s not cracked. Oh well🤷🏻♂️ But hey, if the trees are there to keep ya on your toes😂
Oh ya!
i sure hope you get yellow nets for them heal guards . yellow is the way to go. would make them heal guards stand out
That would be sweet but my only option mayb be black but i am gna check w my guy!
@@ononewheel7 you had them already . i dont see why not
867diesel I’ve had blue and black on the other quad I’m sure i can get yellow i may have to look into it!
@@ononewheel7 oh thats right . i thought the last ones was yellow for some reason . lol
Well the actual heal guards were yellow on the previous quads so that may be it!
where is the kill switch on the custom start button?
Its a Separate part of the harness
Its a pro armor kill switch thats plug and play
And a custom start button also plug and play!
Why does that harness only have 1 terminal for the battery its the black wire, wheres the red wire u connect to the positive terminal on the battery
That is a Separate wire that comes off the solenoid to the battery.
Wher the fuel pump relay
In the rear of the quad by the ecu
Cleaned up the harness
Oh ya bigtime!
Sleek bro
So how much did you sell this quad for
10k
Dam that’s a steal for what you had in it garenteed
Oh ya it was for sure! Keep in mind a raced it for a season but it was still like new!
Link to order harness ?
Best bet is to message him on facebook or instagram jimmy bortz search on my friends list
how can I get the harness done? tried contacting the guy on Facebook but no luck, any direct contact number or something? thanks
I will send him a pic of this message he’s probably just way behind i bet!
First
😎