Thanks so much for making this so simple and easy to understand (and adorable) One of the best videos I found for this project. Seeing the process in miniature scale actually really helps
this is just what i have been looking for, great video. I will be doing this in the very future. I am also looking to install a semi permanent frame to enclose the hot tub with a roof and solid removable walls, not needed to be weather proof. So could you use a screw in post support ground anchor threw the crushed concrete?
Great video!! Just what I was looking for because we are having trouble finding a reasonably affordable contractor. This looks simple enough that I can do it myself.
Awesome. Glad to hear that. I wasn’t sure if it was worth doing as a mock-up, but it’s information I wish I had when I was researching hot tub bases! Glad you found it helpful!
@@HowtoandReviewsOfficial Very helpful and cleverly done. I used gravel for my floating deck foundation, being that I'm in the northeast, and was researching ways to build a foundation for a future hot tub. Wasn't sure if gravel would work but I'm convinced now.. thanx again!
I was concerned about that when I looked into this method, but it was not an issue at all. It is very stable, and will not move. Just make sure to level it, and you’re all set.
Hey, love your video I had a quick question about the landscape timber. Do you screw them on top of each other to give it that finished look like the one in your pictures?
For the first/bottom layer, I ran rebar through them, and about a foot into the ground, to secure them in place. Then, there are landscape timber spikes/nails to secure them to each other as you stack them up.
@@HowtoandReviewsOfficial i see so pretty much the frame of the first bottom layer you drilled holes so the rebar can secure it from moving and they were a foot long and the rest of the layers were the landscape timber spikes ..
@@izzo4231 I would definitely recommend 3/4 inch. If your supplier has options, it’s worth asking their recommendation for your application (hot tub, about 3,000 lbs distributed over about 60 square feet, no shifting or sinking)
This little th-cam.com/users/postUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
Does the diameter of the pad have to allow for 1+ feet of space on all sides of the tub for structural reasons? I was considering just a few inches on all sides for mine
We have built a crushed stone pad. Then groundhogs decided to dig into it and made a tunnel from one end to the other. I don’t know how to fix this!,, 😢
Always always always install your hot tub on a 4" thick concrete slab. Owners manuals make it quite clear that your warranty can be voided if you install your hot tub on and un-level surface. All stone settles and sinks. I bought Spa Level-R and leveled it on a pitched concrete slab, great purchase.
I considered that because the ground was clay that does not drain well. However, I never experienced any issues with it not draining. It’s never been a problem.
Thanks so much for making this so simple and easy to understand (and adorable)
One of the best videos I found for this project. Seeing the process in miniature scale actually really helps
Awesome! Glad it was helpful!
Love your video! So helpful and funny!!😄
Glad you liked it!!
This was a very helpful and easy to follow video. Thanks for being creative and putting the time in to make it.
Glad you enjoyed it!
this is just what i have been looking for, great video. I will be doing this in the very future. I am also looking to install a semi permanent frame to enclose the hot tub with a roof and solid removable walls, not needed to be weather proof. So could you use a screw in post support ground anchor threw the crushed concrete?
Great video!! Just what I was looking for because we are having trouble finding a reasonably affordable contractor. This looks simple enough that I can do it myself.
Nice! Glad you found it helpful!
Thank you for the simple solution with repurposed materials!
Glad you enjoyed it!
Awesome mock up 🎉 very affective
Thanks, I appreciate it!
Very helpful! Thanks!
Awesome! Glad you found it helpful!
Very well done video and quite helpful. I will be using this process for my hot tub installation in the spring.
Awesome. Glad to hear that. I wasn’t sure if it was worth doing as a mock-up, but it’s information I wish I had when I was researching hot tub bases! Glad you found it helpful!
@@HowtoandReviewsOfficial Very helpful and cleverly done. I used gravel for my floating deck foundation, being that I'm in the northeast, and was researching ways to build a foundation for a future hot tub. Wasn't sure if gravel would work but I'm convinced now.. thanx again!
Should probably pack crush in layers to help reduce likely hood of settling
I wonder if recycled asphalt millings would work?
funny video! Lol
ty for the tips. cleared up some questions i had
Glad it helped! I do try to add some comedy. Glad you noticed!
Will it crack the hot tub to put it on crushed rock? Seems like there could be pressure points and the tub bottom could get cracked.
I was concerned about that when I looked into this method, but it was not an issue at all. It is very stable, and will not move. Just make sure to level it, and you’re all set.
Just use gym foam pads underneath
Hey, love your video I had a quick question about the landscape timber. Do you screw them on top of each other to give it that finished look like the one in your pictures?
For the first/bottom layer, I ran rebar through them, and about a foot into the ground, to secure them in place.
Then, there are landscape timber spikes/nails to secure them to each other as you stack them up.
@@HowtoandReviewsOfficial i see so pretty much the frame of the first bottom layer you drilled holes so the rebar can secure it from moving and they were a foot long and the rest of the layers were the landscape timber spikes ..
@@izzo4231 Exactly!
@@HowtoandReviewsOfficial hey just wanted to thank you again for the advice the crushed concrete is 2inch ok or 3/4 ?
@@izzo4231 I would definitely recommend 3/4 inch.
If your supplier has options, it’s worth asking their recommendation for your application (hot tub, about 3,000 lbs distributed over about 60 square feet, no shifting or sinking)
This little th-cam.com/users/postUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
Does the diameter of the pad have to allow for 1+ feet of space on all sides of the tub for structural reasons? I was considering just a few inches on all sides for mine
No, I don’t think so. If the frame of the base contains the rocks, a few inches will be fine. And the rocks can always be re-leveled if things settle.
Great, but how does my family fit in there if they aren't squirrels?? Very helpful video -- thanks!
That’s no problem! You can just use a tub stretcher. I think you can rent them for free in Narnia.
Can we use 2x6 boards instead of 2x8 boards. Will those still work? Thanks!
I think that would be ok. They are 5.5” wide (not 6”), which should be sufficient. I would not have any concerns wit it.
Why crushed concrete over granite gravel?
Cheaper, and as he said, locks together better than gravel.
Legend , mini version😂
We have built a crushed stone pad. Then groundhogs decided to dig into it and made a tunnel from one end to the other. I don’t know how to fix this!,, 😢
I battle them all summer. They are awful.
They cannot tunnel through rocks. Maybe they tunneled underneath it and it sank.
Always always always install your hot tub on a 4" thick concrete slab. Owners manuals make it quite clear that your warranty can be voided if you install your hot tub on and un-level surface. All stone settles and sinks. I bought Spa Level-R and leveled it on a pitched concrete slab, great purchase.
How did you level the pitched concrete?
@ You can’t, all concrete is poured with a pitch for water run off. The Spa Level-R adjusted for the pitch.
@@Misfits138-23ah I see, I didn’t realize they had product like that
digging down, do you have issues with it retaining water, since part of it is buried? or has drainage not been an issue?
I considered that because the ground was clay that does not drain well. However, I never experienced any issues with it not draining. It’s never been a problem.