I don't believe that kid actually beat you in the end. We need to see a rematch under an official ruleset. Other than that, great build. Inspired to build my own.
I was wondering, why not use dumbbell handles and cut one end off? Wish me luck as Im about to make one for my gym, and this video was A MASSIVE help! thank you sir
Awesome video,can I ask you about the holes on the elbow pads and where should I put the bolts on them.Also what's the measurment of that hole next to the elbow pads which is for changing the position of the pin pad?I would be very appreciative If you can help me out with it,because I can't seem to find info.
@@WJBlades You're such and awesome guy,made a video to explain it for a confused person like myself :D.You weren't even slow with the response.Thank you again,you actually did the best tutorial for making an armwrestling table!
Old aluminum tubing that I cut off an obscure tool handle and aluminum rod I had on hand from Lowe's. You could just as easily use automotive gas line and steel rod from Lowe's.
If you're referring to the pens the go through the holes in the table, I didn't measure them. For the elbow pads they probably stick out about an inch and a half. For the pin pads they probably stick out 2 inchs.
if you are interested in the dimensions, I made a video about it. the bars I used are ~27 cm long, 15cm is above table, the rest is below table level for securign the bar.
I don't believe that kid actually beat you in the end. We need to see a rematch under an official ruleset. Other than that, great build. Inspired to build my own.
Brilliant video. Really helps my plans to possibly build one!
Great video. Great dad.
I was wondering, why not use dumbbell handles and cut one end off?
Wish me luck as Im about to make one for my gym, and this video was A MASSIVE help! thank you sir
Another guy did a video using an old dumbbell. I was unwilling to cut the only set I have... still using them as dumbbells. =)
I made a table and used dumbell handles
@@JohnHughesTR im making mine currently and i used bmx pegs
You didn't give any dimensions? Table height, width, thickness of the plywood. Looks good, but a few measurements details would have been good.
I did a follow-up video for that exact reason.
I like your table. I have a bunch of EMT laying around and am going to try to build the frame with it. Wood is just too expensive right now sadly
Easy and useful Techniques
Good video. Thanks a lot.
Awesome vid mate
table dimensions please
How long did it take you to build from start to finish
very good
That one nice table top. I wrap the elbow pad using ducktape to make it more firm before applying the cover.
Just want to add, table edge sweet spot is 4 inch thick. Feel good when you dig your hip against the table edge.
Awesome video,can I ask you about the holes on the elbow pads and where should I put the bolts on them.Also what's the measurment of that hole next to the elbow pads which is for changing the position of the pin pad?I would be very appreciative If you can help me out with it,because I can't seem to find info.
Sorry for the slow response, it's been crazy. I just went to my first tournament yesterday.
I'll try to make a quick video about where I put the holes.
@@WJBlades You're such and awesome guy,made a video to explain it for a confused person like myself :D.You weren't even slow with the response.Thank you again,you actually did the best tutorial for making an armwrestling table!
Thanks, I just took 3rd with my right hand in my first tournament yesterday. Just amateur but lots of fun. Good luck with your training. =)
@@WJBlades Oooo,that's nice man,congrats!Good luck next time,get first place :)!
Where did you find the dimensions of the table top
Web searched it and found the WAF specs.
@@WJBlades got it, thank u
How much would you charge to make another one
I'm not planning on making any more.
Hi, I’m late but where did you get that foam from. Do you remember? Nice video btw
Can't recall, might have been post office.
@@WJBlades thanks and where did you find all the measurements for the pads and the holes for right and left hand?\
@@termixx9139 I did a follow-up video explaining just that it's on my channel.
@@WJBlades thanks a lot
Nice table. How did you wrap the pads? Looks like you cut out cross, but how did that come together at the corners of each pad? Thanks.
Great video
Thanks, I was a bit worried that my forging audience wouldn't like it.
What did you use for the pins and the metal grommets on the table where the pins go?
Old aluminum tubing that I cut off an obscure tool handle and aluminum rod I had on hand from Lowe's. You could just as easily use automotive gas line and steel rod from Lowe's.
Make a steel table in the future bro..
How tall are you? You're not a short man.
Lol... 6'2"
How much measure the support pin? It seems to have about 6 inches? The elbow pad 2 inches, and the beat pad 4??
If you're referring to the pens the go through the holes in the table, I didn't measure them. For the elbow pads they probably stick out about an inch and a half. For the pin pads they probably stick out 2 inchs.
if you are interested in the dimensions, I made a video about it. the bars I used are ~27 cm long, 15cm is above table, the rest is below table level for securign the bar.
Hi where are you based ??
Slightly North of Binghamton, NY
👍🏽
avr american home
They are gonna rip out eventually them handles are so bad
Not a chance, those handles are very secure. I did have to reinforce the legs with lag bolts though.
@@WJBlades nice one nice table anyway good