How to install and configure Remote Access (VPN) on Windows Server 2012 R2 (Step by Step guide)
ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2024
- In this video I am going to show you how to install and configure Remote Access VPN on Windows Server 2012 R2.
Tips and Tricks:
1. Common Ports:
For PPTP: 1723 TCP and Protocol 47 GRE (also known as PPTP Pass-through)For L2TP over IPSEC: 1701 TCP and 500 UDPFor SSTP: 443 TCP
2. Allow the user to Dial-In
3. Check Event Viewer on the RRAS Server for further troubleshooting.
![[TH] 2024 PMSL SEA GF D2 | Summer | ร่วมส่งแรงใจ เชียร์ไทยไปพร้อมกัน](http://i.ytimg.com/vi/dN2gLsCJ0T0/mqdefault.jpg)
Hi, Nick i have seen almost every major topic video you created to counter check on our technique and get various thing to keep for us. Thus i found your video very helpful in terms of detail explanation regarding every topic you made for those who are in the filed IT & Acting as Admin somewhere to cope at their end on a quick way. Overall provided info, clear voice and step you created relevant to topic are quite good. Keep providing more tips & tricks. Thanks
amazing tutorial, nice and comprehensive and professionally done. keep it up!
Excellent tutorial, very detailed and meticulous, plus your English is perfect too.
Thanks for making this, am now subscribed.
Very clear and helpful instruction. Thank you!
Nice and clean explanation, thanks NLB.
Thanks for the help with VPN, it's been a while since I did this.
Thank you for the support Mike !
Great Video.. I've been struggling to configure a vpn server properly but this was perfect
Thank you, Ron! Happy I was able to help.
Thankx for breaking it down.. great tutorial for beginners
Thank you. This tutorial is very helpful..
Thank you for the support, Ananda!
Excellent tutorial. Thank you
Thanks for taking the time to do this! Good video (:
Thank you for the support LA!
Wow, Amazing work brother, thanks for helping us.
Awesome!!! Ur videos are just to the point. nice
Thank you, Tapas! Much appreciated!
Thanks, It's a nice demostration..
Thanks a lot :) please add some more video on Performance monitor Alerts and trace logs
Simple and nice explanations
Great video, thanks for making it!
Thank you, Valiant.
Thank you very much for this tutorial
worked like a charm , thank you
FACTS!!!!!! Thank you so much man, you're the best!!!!!!!!!
Great Explained this topic .....thanks
Thank you for the support Essam!
Love your stuff! Big help!
Good job, thanks for this helpful video, solved my problem in 10 minutes
Thank you for the support!
thank you very much for this demonstation
Thank you for your support, Lahcen!
Realy good, thanks. Congratulations
Hello Pedro, thank you for your support!
Thanks for making this video...
Very good summary. A couple of questions if I may. 1. Will this mechanism allow RDP client access from iPad using one of the available clients? 2. Will this deter/divert any DoS/Remote attacks on my (changed) RDP ports? :)
Perfect éducation. Thx.
great video!
one question, after the client pc has connected to the vpn server, if that server 2012 also has a file server on it..will the client be able to see all the shared folder and access them?
and can i access this remote server by any other OS? or can it only be accessed by a windows client os?
Hi Kratosgamer, thank you for the support.
1. Yes, the client will be able to access the shares even if they are not on the same VPN server, as far as they are part of the same domain/network.
2. Yes, this should be working on other client OS as well. They will need to support the PPTP protocol though.
merci très bonne vidéo, très bien expliquer même si je ne comprends pas bien anglais lol
Thanks, Great video. cheers.
Very very very good. liked it 👍👍👍👍
Perfect and precise 👍👍
Pretty clear.Thks a lot .
most helpful tutorial
very helpful, thanks
Thanks for the tutorial
Thanks, you have a nice English pronunciation
Hi, Great tutorial, I have a question can i do PPTP Connection using my WAN modem ?
I have tried it able connect but no IP Address is given.
Hi Jasdeep, usually you should be able to do it. If you do not have DHCP on your environment, try to assign static IPs to clients.
ice one and very helpful.
Thank you Sachin! Much appreciated.
Thanks for the video, I guess Hendrik dose not know what he is talking about since I did not know how to configure a VPN.
Thank you for the support 3Bs.rocks, much appreciated!
Thank you so much sir
Very helpful one
I know this relatively old topic, but does the 2012 VPN server have to be connected to the ISP's gateway? Does the server need 2 nic cards in it? One for the ISP gateway, and one attached to the local network? I have a laptop connected to the ISPs gateway, with one of the 5 IP addresses that we're allowed to use to mimic someone trying to access the server from outside our network. I have yet to make it work.
I'll try and go back to the begging and run your setup routine. BTW, did you have to open up 1723 on your local router? I didn't see that.
Would like to have seen the configuration for IPSEC but other than that, it was a good presentation.
Thank you, Gizmo.
GREAT VIDEO ! Thanks for making it ! :D
Thank you, MrShaun !
Hello NLB solutions,
Your video was of great help. But i want to confirm one thing, When i went through other resources of tutorials on configuring VPN , many have mentioned about port forwarding to be done on router. I did not find any such thing mentioned onyour tutorial.
So please confirm if this(Port Forwarding) is to be done or not.
And another doubt is whether or not to change anything on security tab of VPN connection properties. Whether or not to enable the check box saying "Microsoft CHAP version 2"
Hi Akhil, thank you for the support. Yes, you are right I only mentioned the need to open ports on your firewalls/routers in order for your VPN to work, but did not show on how it is done. This information is mentioned in the Tips and Tricks section of the video and in the video description.
Hi there,
does the client OS must be WIN PRO in order to work with VPN through domain credentials access? Or it's working on WIN HOME also?
Nice video, thank you for upload!
Hi Madvih, good question - props. As for the Win Home edition you should be able to connect it via VPN, but I think there are multiple limitations, that will make the experience, lets say a bit difficult as Home editions are not domain joinable.
Thanks for the video! Quick question, I have a client server running Windows 2012R2 with RAS working fine. However I built a new server in a remote location and although it connects and joins a new VPN session to that RAS box nothing happens. It would be good to demonstrate that if you connect to a RAS in which there is no local DHCP server at that end - how does your connection at your end work? I am trying to join this remote server to the Domain in which the RAS server resides but its only getting an APIPA address. I assume I need to go into the VPN advanced settings within IPv4 and set a static. ? :) staceman
Hello Staceman, yes you are right. You can assign a static pool of IP addresses, and they will be given upon connecting to the RRAS server. Good luck !
merci beaucoup pour cette video ,vous avez bien explique ,j m suis meme abonnee
Thank you for this!
No problem thank you for the support !
Thank you for the great tutorial.
I want to apply this solution out of LAN (via Internet), what do I have to do, in addition to redirecting port 1723 from the fixed and explicit IP address of the router on the local IP server? I needed UNC access via VPN. Thanks!
The answer of this question also interests me; please sir if you had an answer let me know. thank you so much
Thanks man for the great demonstration. But what if my server was not joined with any domain and I want to make VPN connection from my home using Windows 10? I mean, I rent a virtual server somewhere in the internet and I need to use it as a personal VPN.
Hi Fahad, although I have not tried this you should be able to configure it. Most of the settings like accounts and IP addresses for the VPN can be configured on the server. If you are going to do it, I would be more than thankful if you share the experience. Thank you for the support!
Excellent demonstration. I have a VPN through a Cisco ASA from an outside company and need a virtual MS 2012 to be able to connect. The host server is 2016. How do I get them to be able to see the Virtual as well as the current machine which is an old 2008 Server? The firewall has everything opened to their router, but they cannot see the new machine. The 2008 is the DNS server and is configured appropriately. I can log into the machine with local remote desktop without an issue. Thanks
Great video! I do have one question. How were you able to create your NLB Solutions folder.
i FIGURED IT OUT, DISREGARD :)
Hi Edgar, sorry for the delay. Glad you were able to solve it. Good job!.
NLB Solutions thanks again! I ordered a new modem in order to do the port forwrding. just in case it messes up I can put the other one back. when I have some free time I will be checking out more of your videos. stay well!
Very helpful tutorial. But didn't have how Jessie's account was created. Good video though.
A Very Good demonstration for a learner, but had a question.
Can this VPN service replace the existing VPN solutions in the market, like what we use now to connect to our office network from home. If yes, how secure is this compared the VPN solutions. Please reply
Hi Ramsmallkay,, thank you for the support.
Depending on what solution you are using in your company. There are great 3rd party VPN solutions that are very secure and flexible. Remote access is a great native feature in Windows that can help you achieve the same, but this option is not as secure. I recommend using SSTP, IPSec or IKEVv2 VPN solution.
SSTP in Windows Server 2016 tutorial - th-cam.com/users/edit?o=U&video_id=1xAXqmN9tiU
Thanks for your reply... Got your point now :) :) cheers
No problem, ramsmallkay! Happy I am able to help.
Very good video but i would like to hear more about how secure is the vpn and what are the encryption options.
Hello! I'm new to VPN. Do I have to modify something on my router? I have seen many tutorials and I can not make it work. (Sorry for my bad English).
Hi Jesus, you would need to configure Port Forwarding from the external IP to the internal IP (VPN server) on port 1723.
Hello! First just let me say, great video, simple but clear.
I have a question, I want to access my server from outside the local network, will it work using a dynamic dns?
I know i have to open the PPTP port in my router, but is there anything else i have to do?
Hi 4smm, thank you for the support! Now for the work, I assume you mean dynamic IP? Using a dynamic IP address should be fine for non production, test only environments. You just need to keep track of the external IP address that you have. Well you need to open the PPTP port on the router and forward it to the internal IP address of the VPN server.
Thank you so much for the response. I'm talking about a dynamic dns. Like no IP, or dyndns. Instead of configuring the client with the server local ip, I would use something like mynameserver.ddns.net.
Is it possible? In theory I think so, but I'm not a pro :P
Hi 4smm, this is a thing I haven't tried. But I would love to hear if it is indeed working. You can test it and share your experience!
s. Thank you In The setup❤️
thank you good sir
wow.....well done
Thank you, Steve!
Hi, i would like to know if the VPN server can be same DC ? and how do i configure two network interfaces one for internal and other for wan ? if i can get a video link it will be great.. Thanks
Hi. I Used prettymuch the same settings, I also added NAT and some firewall settings. My goal is to make my VPN accessable from other networks, but I only can connect to it from the local network. Do you have any suggestions? In advance, Thank you!
Thank u very much
very good video thanks !!!!!!!!!!!!!!!!!
Hi
I’ve created a vpn on my server. My client is connected but when I try to ping IP server I don’t find it.
Can you help me?
Hi, Excellent tutorial but could you please explain the IP address of the card on the server. The local and the external card and which one get the gateway and which one doesn't? Thank you
THANK YOU SIR
Thank you for the support Vasco!
I have a Question. I Want to connect external computers to my Windows 2012 server, I have CisCo router where I have Server. Can someone please follow up me with what steps I need to carry out?
Thank you!
Thank you for the support!
i had wanted to know how would i find out what my internet address would be when wanting to connect the client machine to the VPN
Very nice!
Thanks man.
Thank you for the support !
Thanks man for your effort and help. Could you make a video or just explain here how can restrict users to open web sites if in my server 2012 r2 missing group internet explorer maintenance?
Thanks man for the great video. How can I do file sharing after I've configured VPN connection? Thank you in advance
Thank you, Phillip! You can share the folders that you want to be accessible and provide the according permissions on them.
EXCELLENT!!!!!!!!
Thank you, ThePrelude! Much appreciated!
Hi if you already have a DHCP server and you specific the range of static ip addresses , will it cause a conflict with the DHCP?
no , I have this scenario and it worked fine
Awesome
Hi
Great video.
are there any requirements for certificates ?
First, thank you Prashant. If I understand correctly, both internal and external certificates can be used for secure VPNs.
very good
Thank you!
hi thakyou for this video i manage to create VPN from our local network. but i want to access VPN outside my network then connect it through VPN . i have already set a port foward on my WAN but no luck. any ideo i got 800 error during connecting. thankyou!
Hi john, this article is very detailed on VPN errors and should help you look into the right direction - blogs.technet.microsoft.com/rrasblog/2009/08/12/troubleshooting-common-vpn-related-errors/
hi i have a question im a student in it course and i have a problem with the remote desktop, i try to connect from my windows 10 to my server and it says i have an connected sessoin already but there is no sessoins connected. i have done many thigs but they just dont work. we saw that my first network card does not want to connect and when we tried with my wan card with the school ip it worked can you help me please
Great Video!
I have issue with configuration of VPN on Windows server 2016. Its shows below error
The Routing and Remote Access service terminated with the following service-specific error:
A device attached to the system is not functioning.
Event ID : 7024
Source : Service Control Manager.
Can you please provide me solution for this?
How did you configure you Active Directory
Thanks.
Nice video
Dear,
Can u tell me how many users can connect simultaneously with my VPN at same time.?
Так интересно, полезно ...
Thank you Yuriy! Спасибо.
Thanks! :)
Thank you Einar!
I follow your procedure but I am getting "The PPP Link Protocol Was Terminated on Windows 10" and can not see the warning on the event viewer. Please, let me know how to solve it.
Does this work with Dynamic or static ip?
à great Man thanks
Thank you, High Tech!
thanks !!!
Hi...Can i configure it without a public ip address? just for a test at home...Thanks
Thanks. Are you ever going to create a video showing how a client can access the server from outside the network? Say from the internet?
Would you be able to show us how to open ports on our router so clients can remote in from outside our network, not just local.
You guys will get there soon. Just keep practicing I'll see you guys at the finish line
Thanks
good job
Thank you for the support Muhi!