Hubsan H501S HE Tutorial Video
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Hubsan H501S High Edition Tutorial Video
We just set up service center in LA, please contact service@hubsan.com or call 9094440555
~-~~-~~~-~~-~
Please watch: "Hubsan Zino 2+ 4k Aerial Filming Drone Short Aerial Teaser"
• Video
~-~~-~~~-~~-~
Hubsan I have a h501s it's amazing and works fantastic I have making videos with it on my channel it's pretty rugged for what I have been putting it through
3 different 501's bnf's on 1 advanced Tx.All flown almost daily for 10 months. No downloading any upgrades, calibrate, Fly & no issues. A good looking, decent quad.for the $$.
Ya esta gracias!! Solo que gracias a estos videos lo resolví solo era que tenía despegue con gps on.. desactivado y como la seda q pasada cómo suena... gtacias de su atención!!!
I never fail to need a refresher, your video is perfect. Thank you.
Thank you for this video. Amazing work.
Little tip if you're not getting sat signal on the quad just flip the GPS switch on and off it seems to make it search for signal as mine tends to show 5 then I did this consistent 12 sats every flight
Hubsan is best quadcopter company
M&U Myths And Facts i own 4 different hubsan products and yes they are good when they work but i can assure you they have terrible customer service. 3 weeks and still no sign of them sending me the updates required to bind my controller to my 501A.
Just bought a new hubsan H501 advance. Do I need to do anything apart from calibrate 1,2 before flying? Sorry I am new to drone. Thanks.
just bough one of these and it is Brilliant! But, when we push the video button, it goes into circle mode? Are we doing something wrong? Can the four buttons (Enter, Exit, Up and Down ) be fully explained please? Thank you
I have the same problem, did you figure it out??? Thanks
I love this thing. If you have an LA center why are all my orders fulfilled from Brooklyn?
Hi,Sir, which country are you from ?Our service center is located on California, SOUTH EL MONTE
I have just returned to amazon my brand drone because it doesnt take photos and when i start to record video i cant finish it and properly save in the sd card. I have ordered a new one and i hope it will be ok because despite these problems it seems to be amazing.
Hi Hubsan team,
It is possible to connect a fpv goggles 5.8g to controler, please.
Thanks for your lovely product
Regards
Meus parabens pelo seus videos tao bem esplicados, eu tenho um hubsan H501A eu fiz a atualizaçao do drone mas nao consigo fazer do radio controle advanced pois o mesmo nao aprece conectado na ferramenta de atualizaçao no pc ( not connect ) o pc aceitou o controle mas nao conecta na ferramenta de atualizaçao, ja comprei tres cabos de fornecedores diferentes mas nenhum conecta a ferramenta e aparece NOT CONNECT.Alguem pode mim ajudar a solucionar este problema pois nao sei o o que fazer. Desde ja eu lhe agradeço, fique com Deus.
what firmware are you using , according to your barcode on the quad I have the exact same one that is before the X4 came out. mine just beeps at me and wont arm the motors.
how do you get it in compass mode? Or any other mode???
Hiw can i open light for night
can you use lipo batteries for this controller..what are the specs for the battery
What is the default 5.8 frequency for the Hubsan X4 501s? I changed the frequency from the default and my FPV quality hasn’t been the same since?
I just got this drone for Christmas and I can not manage to upgrade the drone do to the fact that I have a Imac and Im unable to upgrade help!
Did you guy did this for PC only?
It is only for Windows operating system.
I ordered a H301S SpyHawk and it's remote looks like this one. When it arrives will I be able to use the remote with my H501S (came with standard remote)?
James Webb how is your spyhawk? mine turns like a truck :D
I waited for 2 months and it never arrived. I had to contact the seller on Ebay to get my money back! I still fly my H501S and it works great.
I just wanted the drone to go up and down but it started to drift away
hi crew !
how to switch in MODE1, instead of the default MODE2 ?
thanks
Use the transmitter stick calibration (shown in your manual), primed for Mode 1.
Why T1 and T2 exists in transmitter?
There are dont have any function...
Any idea why my NEW Hubsan Advanced 501S doesn't send a video feed to my remote or take pictures or video?
Hooverdarnit because Hubsan is a piece of crap?
how to change the setting from 1080p down to 720p??
Hi, Hubsan team.
I would like a clarification on Circle Fly mode.
is it possible to change the radius of the circle fly mode?
thanks.
Hello. The radius depends on how far away the aircraft is from its centre of orbit. If you want to fly with a certain radius, you set it by flying the aircraft away from you to a certain distance before engaging Circle Fly. That's how you change it.
i have watched your video: one question: but with new firmware 1.1.21, or better with the latest 1.1.22, the only way to arm/disarm motor is putting both stick in extarnal lower potision. Is it so?
Hi, 1.1.22 is a little more stable than 1.1.21. And yes, the only way to disarm/arm the motors for both firmware is by pulling left stick to the lowest left corner and right stick to the lower right corner.
My new 501S-S disarms the motors with only the throttle stick down a couple of seconds. Or with both too as usual. Is this normal now? I know a couple of reviews stated they'd like to see that double disarm gone.
Does it work with 64GB micro SD card for you? Mine seems does not recognize it (formatted in exFAT).
Void 32gb
needs to be FAT32 not exFAT, if windows won't format it to FAT32 try using easeUS Partition master , you can use the demo I think .
cheers.
Hello, I have been contemplating purchasing a H501S, and I would like to have the one with the larger transmitter. Will you please tell me what to order?
Thanks
I just got the h501S-S in white. It's the latest. It's the advanced version with a modified 501A board, so it also does waypoints and circle around. I plan to switch to a black 501C shell, I hear it's stronger and has less flex in the arms. Cheers!
Thanks your a little late lol. But I have Mavic Pro now,
You're a lucky man. Congratz!!
Y’all mine isn’t working and is just blinking pink WHAT DO I DO
Hi Hubsan Official, are u guys gonna sell the spare ND Filter that comes with the newer releases of H501S? It really helps reduce jello effect.
Yes, we will sell the ND filters soon, we are still working on producing and distributing them.
Hi Huban, is there an instruction manual pdf for the Advanced transmitter? And what's the latest Tx firmware version?
You can use this link www.hubsan.com/productinfo_14.html for H109S manual and under the FAQ & download section, the H109S low edition instruction manual will have information on the advanced transmitter.
HUBSAN OFFICIAL
HUBSAN OFFICIAL This has been removed!
com esse modelo e possível enviar sinal de vídeo para celular, pra que eu possa usar óculos VR
What do you do if it says gps signal lost
I just get into menu (throttle down and hold enter), and put "Fly when no GPS" to "ON".
Why does everyone talk about altitude hold mode when I don't see it on the advanced version transmitter? Isn't it just 1)headless, 2)GPS, 3)home and 4)follow me?
oh sorry. Just realise in the manual it says when GPS mode is switched off, it automatically reverts to altitude hold mode. Guess this means altitude hold is default mode.
It tells you which mode it's in at the bottom of the TX screen.
Hello. I just received my H501S and noticed that there is a dark glass cover over the camera. What is it? Also, I ordered prop guard but did not receive them with longer screws. Where can I get the correct screws? What is the correct size?
Hi,
The dark glass is likely to be a photo filter to improve camera quality.
Please email the problem to Service@hubsan.com, it will be easier to ask for your personal information and we can arrange something for your propeller guard screws.
Thanks for your quick response.
litesp the plastic piece on the lens is for packaging, remove it and you will see a huge difference in picture quality, if you twist it you can see its not connected to lens if you want pics i can send
Hello. It looks like a glass piece on mine. Can you please share a picture of what you see? Thanks.
litesp u talking about the small red tab? that's a protective sticker to be peeled off. don't remove anything else!
Hi i had the problem to connect my h1009s to his transmitter (low edition) he doing nothing...
I apologize for the late reply, have you found a way to bind your transmitter to your drone?
hi, yes i found a way to bind them with a new motherboard, but now i cant do the calibration... i think that it is the compas..
Soundtrack of video
A lot of these fly away and never see them again
have me why can not make a photo
Video way too fast doesn’t give you time to read the prompts
Wouldnt recommend this product. Customer support is horrible.
You must be in an alternate universe. My experience with them has been fantastic.
Adolfo Rosado congratulations... you're lucky. 50/50 shot of getting one that works properly = horrible odds. Getting Hubsan to solve an issue? Good luck.