Upgrade procraft vmm800 Elimination of backlash of small longitudinal feed Installation of thrust bearings Metal Lathe alii.pub/6jgrcc MGEHR1010 alii.pub/6jgrcq MGGN150 alii.pub/6jgrd4
The newer version (blue) of the Shahe DRO is better than the DRO you show (I have both)(on my mill). I took the back off and used a mains 3vdc power supply for continual on with no sleep. I need to do some of these things to my G4000 9x19 lathe. Good vid.
Awesome video! I'm upgrading my mini lathe (Busy Bee B-244) motor to a stepper motor from my friend (the stock motor from 1986 finally died), should be a monster! Maximum will be approx 2000rpm (chuck) with about 6nm pull-out torque at that speed (much much more torque at speeds less than that). It's a beast. He said it can run on 120v at lower power and while running it draws next to nothing but when you put it under load the controller always trying to keep it at the same speed, so for short durations it can pull up to 2000 watts to try and keep it there (you can tell the controller the maximum you want it to pull).
This is way off topic and probably not something anyone watching this would know but, this beat is from a really old rap song called Burbons and Lacs from Master P.. 1997
![MINI LATHE TRANSFORMATION! DC motor to an AC motor 🔧 [Optimum D180x300]](http://i.ytimg.com/vi/u5_XmAoCYrU/mqdefault.jpg)
Much respect. The last couple of videos are truly inspiring, you're showing that real work can be done with very modest tools. Brilliant
Turning the compound radially vs the stock, at
Nice job on the lathe. Also good to see someone using a decent parting tool!
New here nice to see some machining, hoping to learn here.
Nice upgrades, just subbed
Very good job, and nice video work sir !
ha!, just bought a HF mini laith, this is now my #1 go to channel, please keep em coming for newbies. Im lucky to have some machinist friends to help.
Great job!!! What is the specification of the bearing?
Hello sir,
The newer version (blue) of the Shahe DRO is better than the DRO you show (I have both)(on my mill). I took the back off and used a mains 3vdc power supply for continual on with no sleep. I need to do some of these things to my G4000 9x19 lathe. Good vid.
You also would benefit from a quick change tool post so you can have several tools already set up on center. I'm an ex tool and die maker, retired.
Станок работает над собой с помощью человека.....
Awesome video! I'm upgrading my mini lathe (Busy Bee B-244) motor to a stepper motor from my friend (the stock motor from 1986 finally died), should be a monster! Maximum will be approx 2000rpm (chuck) with about 6nm pull-out torque at that speed (much much more torque at speeds less than that). It's a beast. He said it can run on 120v at lower power and while running it draws next to nothing but when you put it under load the controller always trying to keep it at the same speed, so for short durations it can pull up to 2000 watts to try and keep it there (you can tell the controller the maximum you want it to pull).
Hello friend. What's the code of axial bearing that you used on leadscreew ? Excellent job, congratulations!!
Did you make that sweet little tapping handle? do you have a tutorial and or drawing you would be willing to share?
cut be possile have a picture of the label of the gear guide. Thanks in advance.
This is way off topic and probably not something anyone watching this would know but, this beat is from a really old rap song called Burbons and Lacs from Master P.. 1997
Nice upgrade vid,
Sweet song ten mins In