MINI LATHE TRANSFORMATION! DC motor to an AC motor 🔧 [Optimum D180x300]
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2018
- In this video you will learn how to change the DC motor of your lathe. In this case the Optimum D180x300 lathe.
AC Motor link ► amzn.to/2UTCsl6
Variable Frequency Drive link ► amzn.to/2D6buws
Subscribe to my channel: th-cam.com/users/Idiffill...
Aless Gonzalez - บันเทิง
![ไม่ต้องมีที่ที่ให้ฉันอยู่ แต่ขอแค่มีฉันอยู่ก็พอ (Spaceless) - getsunova [OFFICIAL MV]](http://i.ytimg.com/vi/4N8idbxZ-7M/mqdefault.jpg)
well it's a lathe th-cam.com/users/postUgkxN9zrzkkhnjUF5PQbuA_B1gYdsfCu9k6z but it wasn't what i would have anticipated. Headstock, tailstock, carriage apron are manufactured from aluminum now not cast iron. The spindle diameter for the bearings is too small allowing for a few play in the spindle so I am using some blue Loctite to take out the play.
You not only can do machinist work ,you are also good at electronics! Nice job.
Very impressed with your initiative. Quality work. Please watch your fingers when drilling and consider clamping rather than hand holding, I know from experience!
Oh! Brilliant broaching of that keyway!!!!
That is a true transformation, like transforming David Banner into the Hulk !
Excellent! Never occurred to me to go AC with my mini lathe. I have a 3/4 hp 3ph motor laying around that I've been wondering what to do with. I may have to try this. Well done!
Really impressed with your anvil and the hammer you used. Very nice video and appreciate the acoustic guitar background. Thank you sir.
Thank you for this video! It's very easy solution but with a big upgrade! good job!
Very nice Aless! I like your step wise approach to this project.
Madre mía, me recuerda mis primeros años en la mecánica... Que nostalgia 😋
Show Off! Nicely done!!!
Great work. Gives others the inspiration to do likewise... Good video.
Nice video! Thanks for sharing. Very satisfying end result
Now that was a sweet ass job on that . now you have a bad ass motor with plenty of power great video !
Simple and effective, nice !
Nice job; well implemented. Have you had any issues in the gear train with the big increase in power?
Although I do not understand all the ramifications and I am not a machinist this looks very nice! I thought DC was better but the operation and instant forward to reverse is superb!! Wow well done!
This is brilliant!
GREAT JOB YOU DID !!
Nice work!! Impressed!!
Tudo ficou muito top, show demais meu irmão parabéns aqui do Brasil!!👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Great work
Nicely done!!!
IIt didn't take me long to burn out my 500w motor on my chinese lathe so I replaced it with a 2400w motor from a useless mulcher I had ,as for the pulleys I changed them to multi-v [they last longer ] ,That enabled me to make a simple clutch I have made a lot of changes to my chinese lathe ,now I can make a reasonable depth of cut on alloy steels i
the last lathe bender :) kingman :D
Cool mod I’ll have a look at doing this when I get mine
Nice job , well done.
Excelente, Aless!!!
Good work, have fun with your upgrade and continue to show more of your ideas. Herri in Kunming China.
Lovely Job man !
Carai que modificación mas guapa, parece facil pero deve ser super difícil . Enhorabuena👏🏻👏🏻
Compañero otro estupendo video !!! Haber cuando uno probándolo a full , un saludo 💪💪
Excellent work.
great job my dude !!!!!!
Very nice work sir.
Next is, I suppose, to install ball screws, steppers, controller and to have CNC lathe :-). Excellent job!
Excelente trabajo!!!
Nicely done.
Thank you for showing, nice work, also good video. Have a good day.
Muchas gracias por mostrar su trabajo, su diseño y terminación. Su video fue muy constructivo, tenga usted un buen día. Desde Uruguay lo saluda Charrua
Muito bom seu vídeo , fez mais alguma melhoria no torno ?
Excellent job.
Good Job. Now it have power enough.
This is definitely a huge improvement to these bench top lathes.....well done.
molto bravo, complimenti :)
Well done brother.
Well done and that is a very nice shop you have.
Excellent work!
Bravo très intéressant
Good job Mr Gonzalez
Nice work!
Very very good
Muy bueno.
Gracias, mi hermano.
Que tal! Gracias. Esto puede servir para cualquier mini torno, me imagino. Son muy similares estos mini tornos chinos.
Aless muy bueno tu video. Cuando harás uno mostrando las bondades que da su nuevo motor.
Puedes darnos las características de tu nuevo motor?
Un saludo desde Chile
good job now all you need is a quick change toll post and a tool rack with all the parts on it keep up the good work. my family say we are related to a Spanish general the torre part .
Nice soldering :)))
Amazing video
Awesome 👍👍👍
Estupendo vídeo, muy instructivo si sabes trabajar, estaría fenomenal que pusieras el enlace del cuenta-vueltas.
Nice job👍👍👍
Muy interesante un saludo compañero
Good music as well!
Aless, Nice Modification! May I ask what is the H/P of your new Motor?
@Jayce Decker Uh...? Why?
How slow can you take the speed on the lathe now and still get a good cut? Are you happy with the motor upgrade still? Thank you so much for the video!
boa noite rapaz vc sabe o que está fazendo pra modificar o motor de forninho e a elétrica vc esta de parabéns 🤣🤣🤣🤣 ótimo trabalho que vc fez fica com Deus abraço
Muito bom, prendendo comprar um torno deste modelo e fazer as mesmas modificações.
Ainda vou modificar para que ele se torne CNC.
Parece que você pretende fazer o mesmo.
Uma dica é você fazer um sistema para lubrificação do material usinado, luz e proteção telescópica ou sanfonada nos fusos, barramento e carro transversal.
E mais uma dica é de instalar paquimetros digitais de profundidade no carro transversal, assim quando você for usar de forma manual terá um indicador digital que lhe dará precisão.
Faz uma base que colete e filtre o óleo solúvel que você vai utilizar caso faça o sistema de lubrificação.
Buen y bonito trabajo, gracias por compartir!!!
Que tal te ha salido ese torno? Estoy en la posibilidad de adquirir uno de similares características, y la verdad que no hay muchas referencias sobre ello.....
Muchas gracias de antemano y saludos desde Canarias.
Para trabajos pequeños y precisos, recomiendo los tornos americanos Sherline o los alemanes Proxxon.
Enhorabuena por la mecánica. La eléctrica nos has dejado con muchas preguntas. El motor parece trifásico amenos que tenga el condensador dentro de la caja de empalmes. Mejor trifásico porque tiene mayor par de arranque. Esto concuerda con el variador de velocidad V/F . He encontrado uno parecido de menor potencia ASX-AT1 pero 750X ( 0.750kW ) y es entrada monofasico 220v y salida regulada en velocidad ( frecuencia) trifásica. ¿Voy orientado?
thanks mister
Muy buen trabajo, pero el stop siempre es un contacto normalmente cerrado y has puesto un NO, el caso es que luego te funciona bien, es posible que lo cambiar a posteriori?
muy bueno.. que transmision dentada estas usando??
Hi, how it works the rpm indicator?
I mean, the proximity read the magnet on the axis bar, and then? It gives directly the signal to that display?
Interesting conversion to a much better three phase variable frequency controlled lathe - more torque, wider speed range. Just shows what can ve done by those who try. BobUK
Молодец!!! 👍👍👍
Un muy buen trabajo, tendría que hacer el mismo trabajo a mi G4000 que el motor esta fallando y no tiene fuerza suficiente, y muchas gracias por compartir, tenga usted un buen día.
Very nice work, I must do the same to mine G4000 because the motor it is not working very good. Thank you for sharing, and have a good day.
Fantástico amigo
Had to upgrade my Sieg C3 as the board burnt out. Went with a C6374 from Ebay, a 60amp esc and servo tester, all powered by a 24v 25amp power supply.
I now have 2.7kw instead of 350w. It cost approximately $160au which is $30 less than the price of a new replacement board. It all works as standard, even the speed indicator.
You're solution is better, this is not a good induction motor application.
You should write an article detailing how to do it. I’m sure there are plenty of people who would love to be able to do the same.
Really nice Aless. Just a question though. Was the main reason for the change more power only or are there other benefits you were looking for?
a bit late but a i believe that AC motors have full torque at lower speeds which DC motors do not
Magnífico vídeo!!
Super boulot mais comment tu fait les poulies ?
excelente idea como no tengo luz trifasica lo boy instalar con variador de velocidad entrada monofasica salida trifasica
can you give me the link where you bought the engine speed display (rpm)? thank you
First, always cover the ways with a board when you change the chuck, Second, a good set of taper roller bearings in the spindle will do wonders for runout and noise.
super
Yo lo he echo en el mío, y es lo mejor que puedes hacer , no hace falta tener corriente trifásicamente , ya que las tres fases se generan en el control
Oi! Estou procurando escovas de carvão para o modelo Optimum 93ZYT005 aqui no Brasil, mas não consigo achar de jeito nenhum. Tem alguma forma de substituir ? Ótimo vídeo, muito obrigado.
Hi, I'm thinking of buying a lathe. I have seen with brushless motors. Would you recommend with that type of brushless motor? thanks for your answer
Also, what pulley system are you using?
Primero que nada gracias por compartir este exelente video de verdad yo tenia pensado hacer algo similirar a mi torno marca grizly es identico al que muestras, pero no sabia ni por donde comensar mil gracias haora ya tengo una idea , respecto a la nececidad de convertirlo yo lo veo como algo inevitable devido a que todos estos tornos estan mal diseñados el mother board el motor y las ligas que usan de bandas son delo mas corrientes y terminan fallando el mio fayo alos 6 meses y despues alos 2 años me canse de arreglarlo y esta guardando polvo desde entoces pero despues de este video no mas ! ademas de ser una mejora tambien pienso se puede aumentar el hp del motor el mio era de 3/4 hp pienso poner uno de 2 hp !
Very nice! Is that a proximity sensor? What function did you have it perform? Also are you able to provide a wiring diagram? Thanks!
Chad Atkins tachometer
Good Idea and great work.
But IT can be dangerous.
Each three-jaw chuck(Dreibackenfutter) only has a certain maximum speed limit!!!
Hola, enhorabuena por el trabajo, estoy en ello, me gustaría por favor que comentaras la relación de las poleas, de cuantos dientes o diámetro son... Mil gracias desde ya. Saludos.
2:22
Interesting technique.
Damn, neat! Never thought of using my lathe as a scraper! Woot! I was going to grind down my key but instead I'll scrape the key slot in the pulley! Sweet
Super
Good
Hello. The optimum choice is 180x300 or proxxon pd 250 e. What is the reason.
how much hp/wattage does the new motor have? and how well does it cut?
I can't believe you held that bracket with your hand while drilling it. Good way to tear your fingers off.
I almost learned the hard way myself, although it was a much smaller part and at worst would only have cut my finger open; still, doesn’t take much if the drill bit catches the work.
ales, te doy un truco para convertir tu sierra de banda que corte automaticamente, 1 paso el tornillo del eje donde balancea la sierra aloja en su interior un muelle que es el que te sube la sierra, quitaselo y ajusta la presion del tornillo de tal forma que la maquina caiga sola pero sin que tenga juego , 2 el boton (Pulsador) del mango lo suelta e inviertes los contactos con el fin de que si no lo pulsas la maquina se enciende y si lo pulsas se apaga.
Con esto se acaban esas pequeñas correas, que se rompe casi siempre y que son caras, esta transformacion, el torno es indestructible, ademas trabajas con poderio , no decae el motor, excelente