Fantastic series of videos! I subscribed and liked. I'm from Indiana also, and hopefully will get to meet you at a show some day. Please keep up the great work Zip!
I set up at Portland on North St. (first paved road that runs along the parking field). Just look for my tractors. They'll be mixed in with King Midget cars, some John Deeres, an Allis G Mini and a Cub Low Boy and a smattering of other small engine powered machines. Hope to see you there! Cheers! Zip~
hey ZIPPPPP.....I WAS LOOKING FOR INFO ON JUST ONE OF MY MANY BRIGGS, ENGINE.. THE KHOLER on one of my riding has a bad flywheel so I was going THRU the spares the KHOLER is a 26 hp....version so I decided to look on utube..... decoding BRIGGS... and boom! there you were... turns out it's a 44777......26 hp... perfect.. but will look well into it before is pull the KHOLER.. I don't know about the bolt patterns being close... I'll find out for sure.... I bought a never started 26 hp BRIGGS.. for 250... since the other is a 26 I'll keep the never started for something else... good to see your post!
Hi Zippo, I know this video was done in 2017 & I have used the links you provided, thank you. Just a heads up the links do not work now or were taken down 🙁. I do have a question, on the chart it list by series #. Where do we find that (series #)
Your Model Type and Code are on all Briggs. The Series would be the "Type". This is the set of numbers that differentiates which manufacturer ordered these engines for their power equipment and associated with this same number are specifications unique to the manufacturer. Like, engine color, carburetor type etc. Hope this helps! Zip~
I'm really thankful for your information following you from Libya Mr. .. Hope if I can get instruction manual and workshope manual for my Homlite Generator 252417 model 0169-01 Type.. I bought it 5 days back having problem with Carburetor and I found Main jet is broken.. Hope if you can give advice ,cause I didn't find spare parts here in Libya.. Thanks in advance
Hey Zip, very helpful videos, is there any way to ID a Briggs and Stratton engine that has had the original starter cover replaced ? If I sent a photo to you, could you tell anything from that? Thanks
i herd that the code's first two numbers are the year of the motor from a lawntractor forum quite a few years ago. oh also picked up a free toro ' wheelhorse' friday, not sure of the year but its a 17hp oil presure briggs, 44" deck and hydrostatic. sounds great, but.....trans is locked up, motor covers are missing, hoods broke. ill try n see whats goin on with it sunday possibly. more then likely itll be used for parts , im thinkin its too far gone.👍
Can you help with model number for early 1960 3HP B &S. Only reference I can find is a plate on the block which says: TD NUMBER 2222198. However I can't find any BS manual referencing that model. I want to replace not working coil with Magnetron coil to eliminate the points/condenser. Can you help?
There are a number of ways to determine the power of any small engine and the easiest is doing an internet search of the engine model number in question. Another is looking up your log splitter model number. Typically, Consumer grade log splitters are between 5 and 8 horse power depending on the pump requirements. I run a 25ton with a 6hp with absolutely no issues. Zip~
Ok so I have both of those pdfs before but How can you find the valve specs when my exact model number and type don't show up anywhere specifically. 406577 0106 e1. Ant find it anywhere. Any help is appreciated
Dear Zippo, I have an old Briggs engine, model ZZ, the label says: Mod. BP - TYPE 300732 - Series 193249. Could you please tell me the year of manufacture of this engine?
The Model BP is the same base design of the ZZ but a later model engine. As for what year it is, I'm sorry but I can't help. I used to reference the ASECC website, but it is no longer. This caused a great many of us to look for people who knew the codes and associated years which took me to Facebook Groups, where there is a wealth of information and people eager to help. So that's my suggestion to you is to go to Facebook and search for vintage Briggs engines groups, join the groups and use them as references. Zip~
The Model BP is the same base design of the ZZ but a later model engine. As for what year it is, I'm sorry but I can't help. I used to reference the ASECC website, but it is no longer. This caused a great many of us to look for people who knew the codes and associated years which took me to Facebook Groups, where there is a wealth of information and people eager to help. So that's my suggestion to you is to go to Facebook and search for vintage Briggs engines groups, join the groups and use them as references. Zip~
Can you do a video on identifying lawn tractor transaxles? I know most of them myself but I think it's a good idea to raise transaxle awareness so people know not to scrap them, they don't make good ones anymore!
Well, it would be a short list Rich. Other than the Peerless/Tecumseh trans-axles that plague everything these days, all of my trans-axles are Simplicity made units. I've got three types, the Vickers Hydro powered, strait 3 speed and variable three speed. I'm not familiar enough with other manufacturers to give much information on them. Cheers! Zip~
What happens when you don't have a model number stamped on engine? My 4hp push mower from 2002, bought on clearance at Home Depot, MFG#02009. Family YBXSX 1581VA. The UPC doesn't bring up anything either, 0 47282 74278 5. Made in Lawrenceburg TN. Got a few partial numbers from another sticker. I'm lost here.
If the engine is covered with a plastic shroud, remove it and you should find the numbers stamped in the metal housing if it's a flat head engine. If it's an over head valve engine, the numbers are on the valve cover. Zip~
Man in Georgia refused to tell his model number Briggs engine. It is mostly similar to- 31H777 which is for riding mower- vertical shaft Intek one cylinder, with 12v starter, but his has no alternator stator nor magnets under flywheel according to him. What code would that be?? Or is he lying? The code for 319775 is replacement 18 1/2HP engine for power generator without alternator, with starter. What vertical shaft implement with 18HP has no stator? I thought that a 12v starter motor required a 12v battery, so that an alternator was also required to charge it.
I'm trying to work on my Briggs mower, but i cannot find what model mine is...can any of you nice ppl direct me to a service repair manual, here is what i can see on the block(9P602 0022H1) I have a Haynes techbook, but i cannot find my numbers at all, thnx in advance
If the engine has a plastic cover over the metal blower housing. Remove that (usually with two Philips screws) and your numbers should be stamped on the blower if it isn't an over head valve engine. If it IS an over head valve engine, your numbers will be on the valve cover. Zip~
@@ZippoVarga THANKS...i forgot to also add, directly under those numbers is what appears to be a date.(DOM 01 14 15). when the sun rises, i shall follow your instruction...my manual gives me 2 piCs, 2 models, model 80000 300e/ 450e series.90000 also ranges with many other series..
Just looked up a blower housing for a Homelite T-16 Briggs engine and I'm seeing prices around $175 This is no doubt price gouging and an embarrassment to the industry.
That's highway robbery! Is yours missing or just rusted out at the bottom? You can use blower housings from the 13hp to 16hp. I'd check the Facebook Groups that cater to Briggs, Simplicity and Allis-Chalmers and ask around. Typically you can find one for $30-$40 plus shipping from other enthusiasts. Zip~
Fantastic series of videos! I subscribed and liked. I'm from Indiana also, and hopefully will get to meet you at a show some day. Please keep up the great work Zip!
I set up at Portland on North St. (first paved road that runs along the parking field). Just look for my tractors. They'll be mixed in with King Midget cars, some John Deeres, an Allis G Mini and a Cub Low Boy and a smattering of other small engine powered machines. Hope to see you there! Cheers! Zip~
Useful resource. Thanks for taking the time to produce the video.
Glad you find it helpful John! Cheers! Zip~ And good luck with the Welch plug and electrical!
Knowledge is power thanks for the info brother have a great night
hey ZIPPPPP.....I WAS LOOKING FOR INFO ON JUST ONE OF MY MANY BRIGGS, ENGINE.. THE KHOLER on one of my riding has a bad flywheel so I was going THRU the spares the KHOLER is a 26 hp....version so I decided to look on utube..... decoding BRIGGS... and boom! there you were... turns out it's a 44777......26 hp... perfect.. but will look well into it before is pull the KHOLER..
I don't know about the bolt patterns being close... I'll find out for sure.... I bought a never started 26 hp BRIGGS.. for 250... since the other is a 26 I'll keep the never started for something else... good to see your post!
I have the exact same model, type and code number. Must have been a productive year.
thanks for the info on the brigs and stratton engines /keep up the good work
Thanks for the link soon I will be working on an older 5 h.p. horizontal shaft
Very cool info man! Thanks!
Great video. Thanks for the info.
Thank you for this great information. Very helpful. More grease to your elbow.
Any idea of what the current links are to the torque page?
Can i find a wireing diagram for a simplicity 3112 V. on said site ?
Hi Zippo, I know this video was done in 2017 & I have used the links you provided, thank you. Just a heads up the links do not work now or were taken down 🙁. I do have a question, on the chart it list by series #. Where do we find that (series #)
Your Model Type and Code are on all Briggs. The Series would be the "Type". This is the set of numbers that differentiates which manufacturer ordered these engines for their power equipment and associated with this same number are specifications unique to the manufacturer. Like, engine color, carburetor type etc. Hope this helps! Zip~
@@ZippoVarga Thank you. I do see the "Type" but not the series. And now I know.\
Thanks again. Joe Z
Thank you for this information
I'm really thankful for your information following you from Libya Mr. .. Hope if I can get instruction manual and workshope manual for my Homlite Generator 252417 model 0169-01 Type..
I bought it 5 days back having problem with Carburetor and I found Main jet is broken.. Hope if you can give advice ,cause I didn't find spare parts here in Libya..
Thanks in advance
Hey Zip, very helpful videos, is there any way to ID a Briggs and Stratton engine that has had the original starter cover replaced ? If I sent a photo to you, could you tell anything from that? Thanks
Hi Maine. You need to measure the bore, stroke, valve sizes to determine the HP of an engine and there for, what engine it is for ordering parts. Zip~
I don't have stamped engine numbers on valve cover or and sticker is wore off on blower cover how do I know what engine I have??
i herd that the code's first two numbers are the year of the motor from a lawntractor forum quite a few years ago.
oh also picked up a free toro ' wheelhorse' friday, not sure of the year but its a 17hp oil presure briggs, 44" deck and hydrostatic. sounds great, but.....trans is locked up, motor covers are missing, hoods broke. ill try n see whats goin on with it sunday possibly. more then likely itll be used for parts , im thinkin its too far gone.👍
Does anything tell you the type of shaft without pulling the motor? Eg threaded, keyed, diameter etc?
very nice job.
Thanks Josh! You're working your way through all my videos pretty fast! Cheers! Zip~
Can you help with model number for early 1960 3HP B &S. Only reference I can find is a plate on the block which says: TD NUMBER 2222198. However I can't find any BS manual referencing that model. I want to replace not working coil with Magnetron coil to eliminate the points/condenser. Can you help?
What plant is plant 55?
How do you determine the horse power of a Briggs and Stratton small engine ? I need to replace one on a log spliter
There are a number of ways to determine the power of any small engine and the easiest is doing an internet search of the engine model number in question. Another is looking up your log splitter model number. Typically, Consumer grade log splitters are between 5 and 8 horse power depending on the pump requirements. I run a 25ton with a 6hp with absolutely no issues. Zip~
Ok so I have both of those pdfs before but How can you find the valve specs when my exact model number and type don't show up anywhere specifically. 406577 0106 e1. Ant find it anywhere. Any help is appreciated
The standard is .005 on intake and .007-.009 on the exhaust to allow got heat expansion. Hope this helps! Zip~
Hi ! I have an old engine like this and I can't find the reference. can you help me? I live in Brazil .
Type : 60720 model : A serial : 16103
Dear Zippo, I have an old Briggs engine, model ZZ, the label says: Mod. BP - TYPE 300732 - Series 193249. Could you please tell me the year of manufacture of this engine?
The Model BP is the same base design of the ZZ but a later model engine. As for what year it is, I'm sorry but I can't help. I used to reference the ASECC website, but it is no longer. This caused a great many of us to look for people who knew the codes and associated years which took me to Facebook Groups, where there is a wealth of information and people eager to help. So that's my suggestion to you is to go to Facebook and search for vintage Briggs engines groups, join the groups and use them as references. Zip~
The Model BP is the same base design of the ZZ but a later model engine. As for what year it is, I'm sorry but I can't help. I used to reference the ASECC website, but it is no longer. This caused a great many of us to look for people who knew the codes and associated years which took me to Facebook Groups, where there is a wealth of information and people eager to help. So that's my suggestion to you is to go to Facebook and search for vintage Briggs engines groups, join the groups and use them as references. Zip~
Thanks for finding that PDF download bro
No problem
Can you do a video on identifying lawn tractor transaxles? I know most of them myself but I think it's a good idea to raise transaxle awareness so people know not to scrap them, they don't make good ones anymore!
Well, it would be a short list Rich. Other than the Peerless/Tecumseh trans-axles that plague everything these days, all of my trans-axles are Simplicity made units. I've got three types, the Vickers Hydro powered, strait 3 speed and variable three speed. I'm not familiar enough with other manufacturers to give much information on them. Cheers! Zip~
thanks man. I was trying to figure out what year my old ariens sit down was...come to find out its an 1985.... thanks!!
Glad it helped!! I'd love to see a quick video of your Ariens! Zip~
My son took over my you tube page. I'll upload vid this weekend.
Awesome! Let me know when it's posted! Zip~
Cool
So my model number begins with 197412 can you tell me what size
8hp Minibike. Zip~
Do you know what size is the crank Journal?
my model number has an A in it but it's vertical
What happens when you don't have a model number stamped on engine? My 4hp push mower from 2002, bought on clearance at Home Depot, MFG#02009. Family YBXSX 1581VA. The UPC doesn't bring up anything either, 0 47282 74278 5. Made in Lawrenceburg TN. Got a few partial numbers from another sticker. I'm lost here.
If the engine is covered with a plastic shroud, remove it and you should find the numbers stamped in the metal housing if it's a flat head engine. If it's an over head valve engine, the numbers are on the valve cover. Zip~
Man in Georgia refused to tell his model number Briggs engine. It is mostly similar to- 31H777 which is for riding mower- vertical shaft Intek one cylinder, with 12v starter, but his has no alternator stator nor magnets under flywheel according to him. What code would that be?? Or is he lying? The code for 319775 is replacement 18 1/2HP engine for power generator without alternator, with starter. What vertical shaft implement with 18HP has no stator? I thought that a 12v starter motor required a 12v battery, so that an alternator was also required to charge it.
Can anyone please send me the link? I try and pull it up, but says "No page found." DRATS
Link for what Gary? Zip~
@@ZippoVarga
the links you posted for the Briggs info. they kind of come up 404.
Mr. Google is pretty smart eh. I use the same spec page link all the time. (well not ALL the time).
I've got a huge hard copy collection, but for the quick things...Google Rocks! lol Cheers Bruce! Sean~
The earlier engines must be completely different ID wise.
1963 and earlier are definitely not coded to easily tell the year of manufacture, you are correct 29er! Zip~
I'm trying to work on my Briggs mower, but i cannot find what model mine is...can any of you nice ppl direct me to a service repair manual, here is what i can see on the block(9P602 0022H1) I have a Haynes techbook, but i cannot find my numbers at all,
thnx in advance
If the engine has a plastic cover over the metal blower housing. Remove that (usually with two Philips screws) and your numbers should be stamped on the blower if it isn't an over head valve engine. If it IS an over head valve engine, your numbers will be on the valve cover. Zip~
@@ZippoVarga THANKS...i forgot to also add, directly under those numbers is what appears to be a date.(DOM 01 14 15).
when the sun rises, i shall follow your instruction...my manual gives me 2 piCs, 2 models, model 80000 300e/ 450e series.90000 also ranges with many other series..
link is dead
th-cam.com/play/PLg2OlIsLR-cdBq7K8Esep5mAUZjnrQdKF.html
Just looked up a blower housing for a Homelite T-16 Briggs engine and I'm seeing prices around $175 This is no doubt price gouging and an embarrassment to the industry.
That's highway robbery! Is yours missing or just rusted out at the bottom? You can use blower housings from the 13hp to 16hp. I'd check the Facebook Groups that cater to Briggs, Simplicity and Allis-Chalmers and ask around. Typically you can find one for $30-$40 plus shipping from other enthusiasts. Zip~
Thank you very much