I’m a locksmith, you’re right on the explanation you gave, and have a key already.But when you don’t have an original key and you want to program a new one. You have to do the 3x minutes time.
THANKS. this fixed my 06cobalt took a half an hr and it didn't start immediately after the third time but about 3-5 mins later it started. ran lie it was on 2 cylinders so I shut it off an popped the hood to look for issues, didn't find any so I tried the key again and it fired up and ran fine.... self healed lol oh btw mines at 200k miles and still peppy as ever and no pesky light!! (anymore)
Thanks man 👍 this is faster than the original 30-minute programming I'm going to try this tomorrow for had misplaced my keys again. I have a 2010 Cobalt hopefully this does help
The original 30 minute programming is if you've lost all your keys and so what I had to do was go to GM with the title of my car and they get the codes from the factory for the key. So when I got back to my car I had to program the key and that is the one that takes 30 minutes
bought a reprogrammer for my 2009 Chevy cobalt LT and after I programmed a fob to it, my engine light came on. I ran the code reader and got a p0700 code and u0073 code. This makes no sense why it came on right after I did this but it’s been fine. I only have 89k miles. Any help/ideas why please?
Do you know how to program a key fob please let me know. I just bought a 2010 Chevy Cobalt and it has two keys but no key fob I was wondering if it will take a key fob or not it was a used one and it did not come with one.
heres a question, I have a key that is broken in half, can i use a new unprogrammed key that was copied from the 2 broken pieces, and turn the car on while using the end og the broken key that has the programmed RFID, to trick it into thinking the key thats in the ignition is the one is programmed to start it, then follow the the steps to reprogram the new key?
Sorry for the late reply don't know if that work with a chip key I know it work with The key the have the modulator on it I have done that with my other car You can't hurt nothing by trying
Get a key that doesnt have a chip. Insert the clipless key and palce in the on position. Take the broken chipped key and place it on metal of the ignition. Once the security icon goes away turn off while the chipped key is still in contact Now remove and proceed to next step.
Hello all, I have this problem now. My original key broke in half. I was able to get a new key cut but can’t seem to get the original key code to copy to the new replacement key. Even when holding the plastic or metal part to the ignition. Anyone know my options?
I program keys on the spot our machine is $ 4,000 If you have no key at all we have to cut off the vin nummbers then program a the only key at that point for the car. If you do not have a key program you still will need someone like me to come out or tow it to the dealership and that cost way more.
I'm not a mechanic or a technician but for myself I would try this idea If you have a newly cut key that has the chip transponder in it and the transponder is working thin it should work if that's not working take the key to Home Depot have them cut you a new key it could be possible that transponder in the key is not talking to the car I would try that first if that doesn't work thin you're going to have to take that car to the dealer and they're going to have to program it
Did this with my 2009 cobalt and it worked perfectly. Thank you!
What 2009 do you have? Is yours stuck in the anti theft mode?
I like videos that are straight and to the the point like this one. No 15 min endless rambling!
I’m a locksmith, you’re right on the explanation you gave, and have a key already.But when you don’t have an original key and you want to program a new one. You have to do the 3x minutes time.
Is the the theft light supposed to flash or be solid?
Carlos Lainez can you explain if I don’t have a key? I have a new cut key
What if i lost the original key for it too?
THANKS. this fixed my 06cobalt took a half an hr and it didn't start immediately after the third time but about 3-5 mins later it started. ran lie it was on 2 cylinders so I shut it off an popped the hood to look for issues, didn't find any so I tried the key again and it fired up and ran fine.... self healed lol oh btw mines at 200k miles and still peppy as ever and no pesky light!!
(anymore)
Dude wow thank you so much for this video!!!!! Is was so simple and saved me at least 50 bucks!! This worked perfect on my 09 cobalt!!
Thank you for doing this video bc I lost a key and to get another made and programmed... so helpful
Did this work for you? I just lost my only key . Unlike the person who made the video I don't have another key to insert 1st.
But I bought a spare and your programming and Worked like a charm.. thank you brother
Thanks man 👍 this is faster than the original 30-minute programming I'm going to try this tomorrow for had misplaced my keys again. I have a 2010 Cobalt hopefully this does help
The original 30 minute programming is if you've lost all your keys and so what I had to do was go to GM with the title of my car and they get the codes from the factory for the key. So when I got back to my car I had to program the key and that is the one that takes 30 minutes
bought a reprogrammer for my 2009 Chevy cobalt LT and after I programmed a fob to it, my engine light came on. I ran the code reader and got a p0700 code and u0073 code. This makes no sense why it came on right after I did this but it’s been fine. I only have 89k miles. Any help/ideas why please?
Does it work if u just got the replacement key
The security light won't even start flashing regardless of what procedure I use, even yours, it just don't work.
I do not see the security light change NOR the engine start? or am ii not reading the icon "security light" correctly
Awesome! Really works right away!
Does this work with the original key if the security light is on ?
It should
Do you know how to program a key fob please let me know. I just bought a 2010 Chevy Cobalt and it has two keys but no key fob I was wondering if it will take a key fob or not it was a used one and it did not come with one.
Sorry no I don't
heres a question, I have a key that is broken in half, can i use a new unprogrammed key that was copied from the 2 broken pieces, and turn the car on while using the end og the broken key that has the programmed RFID, to trick it into thinking the key thats in the ignition is the one is programmed to start it, then follow the the steps to reprogram the new key?
Sorry for the late reply don't know if that work with a chip key I know it work with The key the have the modulator on it I have done that with my other car You can't hurt nothing by trying
Get a key that doesnt have a chip. Insert the clipless key and palce in the on position. Take the broken chipped key and place it on metal of the ignition. Once the security icon goes away turn off while the chipped key is still in contact
Now remove and proceed to next step.
Hello all, I have this problem now. My original key broke in half. I was able to get a new key cut but can’t seem to get the original key code to copy to the new replacement key. Even when holding the plastic or metal part to the ignition. Anyone know my options?
Please information about these holidays, theft prevention signal
I changed my computer and need to reprogram my key can I use the same key
Thank you ..thank you 😊 this Work
Looking to do it with out the original keys.
Naa Yaa wait a minute bucko
Will this work on a 2007 chevy cobalt?
Luis Valdez from some TH-cam tutorials I believe so I seen him do it on of a Chevy motor in years
No it doesnt.
So if you have the same key bu it' seems to not start the car you can program it the same way
Yes if it a chip key
Pls I have thesame car and mine the engine doesn't creck(turning to spark) and the key light too is on
how about for the fob? How do you program new remote start for chevy cobalt 2010?
Sorry i Dont know for the fob
whats a chevy cobolt?
What about programming a key fob?
Dont know how to do that but I know somebody on here knows how to
@@gemni22 could you point me in the right direction? it would be much appreciated.
You will need scanner snap-on or maca to program fob key
If you have no keys you need to wait the 30 min, what your showing is if you already have a working key, but good video regardless!
I have a Chevy cobalt 2006 to
I program keys on the spot our machine is $ 4,000 If you have no key at all we have to cut off the vin nummbers then program a the only key at that point for the car. If you do not have a key program you still will need someone like me to come out or tow it to the dealership and that cost way more.
Good video. However, do you know how to program a key fob, for a 2007 chevy cobalt?
En mi carro fue que le quisieron robar la batería y al dejar solo un puente conectado se desprogramo
What if you lost your key
did this with my 2nd of 3 keys in the G5 now to figure out why the doors won't work with the fob
also Ace Hardware would not touch my vehicle
I have an 06 cobalt did you figure out why the doors didn’t work with the fob I have this issue as well
I lost my key so i called pop a lock thats my new key but my car doesn't stard how do i fix it i only have 1 key
I'm not a mechanic or a technician but for myself I would try this idea If you have a newly cut key that has the chip transponder in it and the transponder is working thin it should work if that's not working take the key to Home Depot have them cut you a new key it could be possible that transponder in the key is not talking to the car I would try that first if that doesn't work thin you're going to have to take that car to the dealer and they're going to have to program it
0:23 starts
But I don't have the transponder key
Do you have a cut key for the car if so just get a new chip key cut
Well that is cool, Now see if you can do that for the party fund key! LOL! Oh and put some dam gas in that car!
If I had a key I would be trying to program it I don't have the factory key
There chep to get the dealer to cut you one from the vin
it took 20 sec for me
Now wat if there is no original key?
You just have to take the VIN number to any Chevy dealer and they will cut you a new key