Mikuni Carburetor Re-jet and Rebuild Episode 4
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- How to re-jet and rebuild a Mikuni carburetor. Episode 4 is the last in our series on how to clean and rebuild a 06B60 Mikuni Carb. This process will work with just about any Mikuni carb.
The information provided in this video is for entertainment purposes only and should not be taken as legal, financial, or professional advice. All viewers are advised to do their own research and seek the advice of a qualified expert if needed. The content of this video is based on the personal opinions and experiences of the presenter and is intended to be used for entertainment and informative purposes only. The presenter does not make any representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability with respect to the content of this video. Any reliance you place on the information provided in this video is strictly at your own risk.
New subber here. Thanks for these carb videos, buddy!
Welcome aboard! Thanks for the kind comments!
Hello thanks for the vídeo, My cuestión is how the correct idle jet setting? Thanks
That is coming in a later video, during the final build. The head is off and nearly finished. There will lots of video's very shortly.
nice! thank you! enjoyed following. So what is next on the bike to rebuild? :)
Next will be a video on how to set your valve clearances.
Where did you get the factory pro kit from any info would be helpful ty
I looked online, and it looks like they shutdown. I would recommend contacting Keyster directly, and asking them if they can supply what you need.
I need those Rubbers mine are disintegrated.
I used the original one's, which were still in good condition. I am looking for replacement tubing, and if I find anything, I'll post a link here.
This is the Keyster kit that I used. KS-0655NR
www.ebay.ca/itm/383218583088