ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
6th Gen Honda Civic | What Wheels Fit
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2024
- Check out the Honda Civic in our fitment gallery!
bit.ly/2QK0Tgv
Today Gels goes into detail on what size wheels will give you the desired style of fitment on your 1995-2000 Honda Civic. Anywhere from a flush or an aggressive set up, FI has you covered!
Be the first to subscribe - Fitment Industries Garage:
bit.ly/2WwOLEC
Browse Air Suspension for your Civic:
bit.ly/39ChcEG
Check out the JNC004 for your Civic:
bit.ly/2sJI8Ss
We have suspension too:
bit.ly/2ChmsRw
Upload pictures of your car to our gallery:
bit.ly/2obqAZQ
Check out more videos like this!
/ fitmentindust. .
#Honda #Civic #Fitment
What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq
What wheels fit my 7th Gen Honda Civic EU8?
In the thumbnail, you have a pic of a coupe civic labeled ek. Only hatches are ek. Coupes are ej#. And the si is obviously em1. en.m.wikipedia.org/wiki/Honda_Civic_(sixth_generation)
If anyone can clear this up that would be great. Am i wrong or did you make a mistake. I feel like there is a misconception about the trim codes.
How bout showing 17’s on a 6th gen civic? I’m on 17x7.5 unsure offset wrapped in 205/50’s... would like to see more options in my style
7th gen Honda Civic
14" through 18" so here some 15 & 16's... Thanks.
14 is stock, and 17 18 look goofy as hell. They showed what looks good.
You do not want 17 or 18, they’re too much wheel and you’ll be riding on pancakes
know what i want this car to be my first daily driver thanks for the help and the pick
get it
They are awesome for starters & experienced drivers, really good for cornering because if you lower it it will become very sticky. If you seek power just swap the engine and it's basically a race car. 👌
Great choice
Just scooped up a 97 civic with only 135k miles. Def needed this, thanks! Can’t wait to start working on it
just scooped myself a 96 love the little things it needs work but body wise and interior wise it’s fine
@@evaluna122 that’s dope have fun w/ it! Sedan or coupe? I was surprised at how good condition mine was kept for being 24 years old. Good luck on your build 💪🏽
I was thinking of getting a 96 or a 97, can u give some feedback on your purchase please and thank you.
@@suicidalkermit7667 my 97 has been running great despite a few older belts needing to be replaced. A/C and cruise control work as well so I think I got lucky. I’m sure the 96 isn’t that different being that it’s also a 6th gen.
I just scooped up a 97’ civic sedan with 97k miles… bare bone stock & in 9/10 condition lol im leaning towards 16s einkei wheels & lowering springs since my struts are in great condition. Goal to make the cleanest OEM+ civic in Az
I know it's a year late but this video is really helpful! I bought a 96 dx hatchback for 1k as my first car and am working on getting a job so I can get her some new shoes. I'm new to all the car stuff so seeing examples was really helpful in visualizing what I want
Nice bro I want a 96 ek hatchback but I’m only 13 so I still got some yrs left to learn about civics and what not
Coupe*
Fucked up*lol
@@user-nh3ob9xy1vu get it yet or what?? a lil late
3:38 best 6th gen honda I've seen yet
disagree with those light stickers tho ngl
The ej was my first car, and now I have my second ej that I've had since 2017. New paint, wheels, suspension. Stock D series
Just picked up a 1998 Honda Civic Dx hatchback. Love it so far. Stock d series. Plan on getting some coilovers and RPF1’s. Eventually I plan on k swapping it but just trying to enjoy it for what it is for now! Great on gas and fun around the corners.
I have a 98 ek silver 246k miles still runs great
3:09 Holy shit my hatch in on the video :v i never saw that coming but it loocks sweet 😍❤
th-cam.com/video/ow902djJq9o/w-d-xo.html
90’s Sir civic coupes are clean af
SiR Sedans from the Philippines are cooler tbh
can you do a video about the 7th gen civic please?
7th gen civic video please
can you guys do 7th gen civics pls
Thank god for these types of vids! Does anyone know if 15x8j ET10 fit on a 6th gen 4 door? Would it need any arch rolling or suspension setup? 🙏🏼
2:38 👌
I'm adding 16 inch on my 2000 ex, I love my daily out of town driving civic
Just wait till I tuck these 16x10 -22 on my ek hatch, I’m bagged though 👀
Seen someone tuck lip with 17x10s but had 17x8.5 up front shit looked Soo good
Justin Woodard it’s a lot of work but looks so damn good
Did you already and if so what’s ur ig
Do a 7th gen civic one of these!!
please!! the only one missing
@@kirridai exactly !
Will my NB2 16 inch wheels fit on my 6th gen?
Who makes the wheel on the wall behind you. Your top right second star wheel? The silver one
I got a 98 ej6 sedan running on 15x8's 0 offset tires 175/50r15 rolled fenders tucked under
These all work on sedans right?
Yes they do
I'm looking at fitting 285/30R18 on a 18x10 +20 on my time Attack EJ8
This is a badass idea for new videos!!
What do I do to tuck my 15x8 0 offset on my ek coupe
What abt the 6th gen accord what wheels can fit??
If i don't lower it could I put bigger wheels
Yes!
@@fitmentindustriesgarage5583 whats the biggest I can go without having any clearance issues? Of course this is it not being lowered.
@@fitmentindustriesgarage5583 essentially keeping it stock ride height
is it the same for accord
Hey guy I've got ah eg8 I wanna know what parts I can't take from any of the new gens to fit in my old school honda civic.....
Great review. What is the name of that gold wheel above your left shoulder??
I have a EK hatchback 00 and my rims are 16x8 I had 205/45/16R but I didn't like how they looked. What's the best look set up with 16R?
How do I get the tire sizes and also for that blue Honda running 16X8 +20 tire size because that’s perfect to what I want
185/50!
Need to do 7th gen im looking for 17x8 on 205 45 17 with good fitment no camber will roll and pull fenders on my car to make fit
HELP
15x9 +30 offset , what wheels do i need and will it need modification???
i want to get a japan racing 3 rims and im not that smart with et, so im not sure et25 or et40 will fit without any issue i wont need any spacers?
The higher the offset, the less aggressive the fitment!
Would some rpf1 4x100 14x7 offset if 28 fit a 1998 Honda civic
15x8 offset 0, i can put on my civic or will need modifications?
Nice pick guys,
Is there one for Mazda 3/speed 3 planned in the pipeline?
What about the 2000 lx
I had 15x8 with 25 et and it was outrageours in the back
wdym?
The way he talks gives me Donut media vibrs
That is definitely on purpose
I have a 99 lx and I still don’t know wtf any of this means just want some nice rims and tires
What about 16+8.5 +17 it’s okay for the EK Or it needs some modification or cutting
cars are not meant to be slammed down / lowered like this I know from experience I've owned a 2001 accord lx sedan & shortly after I purchased the car I put the factory struts back on & removed the lowering kit the car drove like it was manufactured to perform.
I noticed when the car was lowered the way the car handled was unsafe I had to literally be aware of ground clearance at all times & could not operate the car at or above speed limits & the previous owner that lowered the car did everything right.
Honda's are not meant to be that low unless you not only do everything correctly but also modify the frame & chassis so the wheels are not tilted beyond the way the car was manufactured for proper alignment .
These cars are extremely dangerous because most people who slam them down do not spend the money it takes to lower the car without changing the geometry of the alignment.
Again if the frame & chassis is correctly modified it's a hole different story because then the vehicle will preform the way it's been modified to perform.
Who knows if 18 inch te37s will fit ?
Will 15x7.5 plus 35 rub ? 96 civic sedan
4:16 is my car
Cleannnnnn
I got an EK in Vintage Plum Pearl (Dark Purple) wanna get champion white Rota R-specs. How much should I drop it? what suspension kit should I go with? Dont wanna go coilovers as they're too expensive. I've heard that going with performance shocks and lowering springs work just as well. any help?
Can we get a version on the most hated 7th gen civic, i have a 01 ex and its killing me trying to figure out the perfect size with a light stretched tire. I just want a flush fitment😭😭😭
I have 155/65R/15 x 6 on my 1998 Honda Civic Lx & I think my shits rubbing but my cars so loud that I can’t tell 😂
Y’all should do what wheels looks best on cars
Is this a limited edition of Honda civic?
need help to pick the size for my ek3 hatch
what size would be better for daily use and sometimes touge?
I hesitate between 7x15 et25 and 8x15 et25
For a daily I’d say 15x7
What’s the best fitment for a 96 Accord?
Do 215 65 15 Fit 2005 civic
do 7th gen civics please
We will see what we can do for you!
You killed it
Konig one love
Thinking about going 15x7 soon, can someone please give me some tire recommendations, not to sure what will fit
I'm like you
I have thought about Bronze JR3 on a white Civic with a carbon hood
that would look dope! 🤘
The Answer is....
SMALL WHEELS 😁
Must have coilovers. Got it
Looking to get some rpf1s for my 98 ex coupe. Should I get 15 or 16?
That’s entirely up to you!
Show de bola mano!!!
I have a 2000 Honda Civic Gli but can’t find a single video on them are they shit? It came stock with the D17Z engine it’s hard finding parts for it
Best fitment for civic eg 92? ...i would go with 16 inch
Check out our gallery! You'll see examples of what others are running with wheel specs and fitment specs! --> www.fitmentindustries.com/search-wheel-offset-gallery
Question : I have a stock 2 door 98 Civic coup with 185/65r14 on it and I’m looking to upsize to chrome rims. I’ve been wondering if 205/55r16 would fit without any issues? Anybody know? Thanks
You get those wheels?
R16 would fit , but 205/55 is to big and will rub the fender ... you should use 195/45 or 205/45
Hello! Can i fit 16"X7,5" +35 ET wheels on my car?
Yes they do! Check out some of our 6th Gen Civics in the gallery running those same specs! -> www.fitmentindustries.com/wheel-offset-gallery?wheel_diameter_from=16&wheel_width_from=7.5&sort=yno&year=1998&make=Honda&model=Civic
would this generally fit the same for 6th gen accords ?
No. Accords have either 4x114.5 or 5x114.5 PCD depending on your engine, while Civics have 4x100 PCD.
4:6 co to za felga?
Will it fit 17x8 +40 on ek hatchback
Yes!
YOOO WAT WHEELS R THOSE ON THE WALL TOP LEFT 2ND ONE????????? 2:30
Klutch KF001!
Title of intro beat?
Just copped my 00’ coupe 👀
Me too bro, hmu! Im in so cal
Jai Stanton I’m in Toronto
Jai Stanton yo was good I got a 95 coupe I stay in SoCal
What rims u put on it? 15 or 16
@@shamdagoat3659 ask the junkyard
I gotta 00 civic ek , jus got some 16x8 +25 it has a 185/55 but seems too tall so I may do a 195/45 , gonna be cambered out:) hopefully they’ll look good
Lol wow I was a nerd 😪
@@Drew.coggs_ig but did you go 195/45 tho?
@@notbanksy8294 actually yeah💀 I sold that civic... was running 205/40 on a 9.5 on my new civic but then sold the wheels. Now I’m fully building a b18 gonna make 450 on e85 and throw some r888s 225/45 lol... I didn’t know sh*t back then😂 now I gotta b series and a ls400
@@notbanksy8294 also I had like -5 camber lol, my new civic had -12 before taking it out
@@Drew.coggs_ig hey bro I have 2000 ex with the same spec rims you had what tires would you recommend with - 5 camber
Math 101 - 0 is a neutral number no+ no- OMG lord iluminate this guy🤣🤣🤣(dont burn it his funny)🤣🤣
What's the bolt pattern for a 98 Civic ?
4x100/114.3
Will the 15inc 97 Honda Accord aluminum rims fit on on a 95 Civic?
Probably not because the bolt pattern is different from civic to accord
@@cristiandominguez7556 thanks, I figured it out the hard way.
@J T no problem man I saw this and wanted to share , tried it myself from a 96 and didn't work
Muito top!!!
Anyone have some suggestion for my fitment? I use bbs chr front 16x7 et40 and rear 16x8,5 et30 on my honda city 2006..
Using 195/45 for front and 225/40 for rear its good? Or maybe 205/45 front and rear? you or anyone can help me? Need some advice..
Thank you 😂
I have a red ek1 with everything stock. Still has the original 14s on it. The tire size doesn't exist anymore.
Damn 🥺
what are some good tires? Rim dimensions are 15x7
Like tire brands? Or size?
@@fitmentindustriesgarage5583 both would be great :)
Are you looking for performance or all seasons?
@@fitmentindustriesgarage5583 all seasons
So for brand suggestion my personal favorite is Continental Extreme Contact DSW06s! For sizes, check out our gallery here and see what sizes others are running on the same size wheel. That way you can get a visual of the ideal fitment you want! --> www.fitmentindustries.com/wheel-offset-gallery?wheel_diameter_from=15&wheel_width_from=7.0&sort=date
I want more camber tbh
Same video, ninth generation accords. !
2nd gen Toyota MR2
I'm the lame dood rockin the fat fives, '98 ex coupe.
17 x 9
20
bro you did not mention a single 17 nor 18
16"s are the best fit aren't they?
That depends on what kind of fitment you're looking for!
@@fitmentindustriesgarage5583 I'm thinking just casual camber etc, like nothing over the top crazy but enough to make it look perf.
Yeah most definitely!
So 17 inch wheels can't fit??
They can fit, do your research but 17x7 17x8 I would say +42 and +45 on the offset. 17/40/205 - 17/40/225 on the tires. It's going to come down to what type of look you're going for also.
so nobody`s gonna talk about that 2010 intro music?
Whats the title bro?
Sooooo I’m back guys... E46..... PLEASE
💻🎥🎬📸🎵💪😍😁🇯🇵👍
Tomahawk tuning TH-cam
💯🤙
Come on, it's EM2 on the preview, what the hell?
Spakes that’s a 99 or 00 Civic not a em2. You can tell by the door trim, em2’s don’t have that.
The EM2 is the 7th gen coupe from 2001-2005. That is the EM1.
This guy should be the main guy making the videos the other guy is kinda annoying
No examples of 17s or 18s hmm fail of a video
I have 17's.x 8 They look beautiful. Basically no wheel gap on static suspension. All I have are lowering springs but, I have stock ride height since I run 215/45 tires in the front and 205/50. It's the chunkiest setup you can run on 17s without rubbing.
I might go 16's to save a small amount of weight.
If you're going for looks 100% 16 or 17s x 8-8.5 would probably be best.
Never seen 18s on a 6th gen personally but I figure the tire setup would be really skinny
Because 17s are the extreme for these cars lowered.
:)