Many thanks for the great review. I really appreciate it. Based on your review, I have bought one of the XY-P15W and I will do the following: (a) Add a heatsink to the IC. (b) A small fan (c) use 2 nos. of 30 w Taoglas speakers SPKR.6.8.A (d) use a smps 24v @ 4 amps and update. Thanks again.
You prolly dont care at all but does someone know a trick to get back into an instagram account..? I somehow lost my password. I would love any help you can offer me
@Jonah Marc thanks for your reply. I got to the site through google and Im in the hacking process now. Takes quite some time so I will get back to you later with my results.
Hi I have a problem with the speaker I made with this amplifier.. I used 7.4v 2600mah and 2*10w driver and when I put it at 80% volume I hear crackling noise.. please tell me how to fix this.
@Jesrel Sunit Hi I guess the optimal voltage should be near to 11.1 v. By that you may be able to give sufficient power to the amp board. Mine is TPA3110D2 with 11.1v 3s Cell, and till now, no such issues. :-)
I am getting quite a bit of noise with it. Try the following experiment. Bring up the volume on the phone to max, play some music, and then bring down the volume on it to minimum. You get a constant hum sound.
@@tsaitaj The power supply has good capacitors, so it keeps playing when I unplug it for cca 15 seconds.Still humms when unplugged - same noise. Capacitor can not hum :) Also tried grounding it and shutting down all other electronic devices. No luck.
Hi, just bought this amp. Can i use 12V 7Ah gell baterry? If it is possible, can you please reccomend some speakers. Goal is to make a portable wireless speaker.
Sir please help me as i am having that board but it produces a high pitch noise feedback everytime it plays(not in standby).can you please please please make a video on troubleshooting the noise problem of such amps?
Sir, is it possible to connect two 6 ohm, 5'' speakers ,30 watts power on a single channel in this amp. I am having a pair of 4 ohm tweeter and a pair of 6 ohm woofers....... Pls suggest a method 🙏🙏🙏🙏
All the nobsounds/douk audio sounds good. Usualy TDA boards for me have nice sounds.. Not all but there are quite few TPA which can deliver good sound.. But there are some little boards like this that just blow me away with sound quality and power.. It's hard to tell which is best, because this are results that I get on my speakers. Sound can vary from speaker to speaker..
Sir I need same circuit to operate 4 ohm 5w speakers can you recommend me recommend that these circuits without some annoying sound of "Bluetooth Connected" Like that.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
Many thanks for the great review. I really appreciate it. Based on your review, I have bought one of the XY-P15W and I will do the following: (a) Add a heatsink to the IC. (b) A small fan (c) use 2 nos. of 30 w Taoglas speakers SPKR.6.8.A (d) use a smps 24v @ 4 amps and update. Thanks again.
You prolly dont care at all but does someone know a trick to get back into an instagram account..?
I somehow lost my password. I would love any help you can offer me
@Rayden Lucca instablaster :)
@Jonah Marc thanks for your reply. I got to the site through google and Im in the hacking process now.
Takes quite some time so I will get back to you later with my results.
@Jonah Marc It did the trick and I actually got access to my account again. Im so happy!
Thank you so much you saved my ass !
@Rayden Lucca Happy to help :D
Highly suggest adding a heat sink. I blew mine. Maybe subpar chip. But for 3 can / 2 us, ordered another. I do like this mini amp.
I am going to purchase this 😅👍
Edit :- I got This 🔥
One for me ❤
I love how mind blown you sound !
So am I too really!
Where can i get the bluetooth amplifier module sir? Excellent sound.
My speaker sounds are breaking with same specifications can you please help
What speakers are those? They look like a nice modern design.
Can you test "Mice on Venus" at full volume? I bet it will distort bad.
Hi I have a problem with the speaker I made with this amplifier.. I used 7.4v 2600mah and 2*10w driver and when I put it at 80% volume I hear crackling noise.. please tell me how to fix this.
@Jesrel Sunit Hi I guess the optimal voltage should be near to 11.1 v. By that you may be able to give sufficient power to the amp board. Mine is TPA3110D2 with 11.1v 3s Cell, and till now, no such issues. :-)
Hi! How is it compared to XY-AP50H? In terms of the sound quality? Thanks! 🙂
Can I connect 20watt speaker to this module?
I'd like to use this as a school Technology project. What are the possible ways to power this?
There's hardly anything diy here.
I tried it with a 18.5V power brick and it works. But when i try it with a 24V 35W brick it doesn't turn on. Do you know why?
I am getting quite a bit of noise with it. Try the following experiment. Bring up the volume on the phone to max, play some music, and then bring down the volume on it to minimum. You get a constant hum sound.
Maybe use battery or any other source of electricity
@@tsaitaj The power supply has good capacitors, so it keeps playing when I unplug it for cca 15 seconds.Still humms when unplugged - same noise. Capacitor can not hum :)
Also tried grounding it and shutting down all other electronic devices. No luck.
Hi, just bought this amp. Can i use 12V 7Ah gell baterry? If it is possible, can you please reccomend some speakers.
Goal is to make a portable wireless speaker.
Mine when conmected, its says loudly ure bluetooth device is ready to pair. How do i remove this sound??? Someone HELP
Sir please help me as i am having that board but it produces a high pitch noise feedback everytime it plays(not in standby).can you please please please make a video on troubleshooting the noise problem of such amps?
And this Bluetooth Amplifier it has a switch?
Speaker wattage?
How many volts does it accept according to 12 to 24 volts?
Both
What are the speakers OHMS that you used ? Great review
Thanks bro 👍 those seakers are 6 Ohm
Sir, is it possible to connect two 6 ohm, 5'' speakers ,30 watts power on a single channel in this amp. I am having a pair of 4 ohm tweeter and a pair of 6 ohm woofers....... Pls suggest a method 🙏🙏🙏🙏
It should work fine 👍 Try to connect them, then reduce the volume before start playing music and slowly raise up the volume to prevent any damage..
@@als-techreview thankyou for the instant reply❤️🙏
Out of all the Mini Amps you have reviewed, which do you think has the best sound quality?
All the nobsounds/douk audio sounds good. Usualy TDA boards for me have nice sounds.. Not all but there are quite few TPA which can deliver good sound.. But there are some little boards like this that just blow me away with sound quality and power..
It's hard to tell which is best, because this are results that I get on my speakers. Sound can vary from speaker to speaker..
I have a question: could I use this amplifier with a 3.7v lipo battery using a DC-DC step up converter? Would that work?
Can i use four 5W 4ohm speaker in this board
Yes 😊
Can I play 12w+12w speaker from this circuit.. please 🙏🏻 reply....I want to buy it
HI, yes I think you can.. As long as you not overpower the speakers..
In this review I tried on my Sony speakers 60W of power each for example.
Does not connect to via bluetooth 5.0, with samsung galaxy m51. What could be the reason?
No aux input?
This Bluetooth Amplifier is need to add a heatsink?
no this one no.. but it always good to have an aditional cooling radiator on..
how is the bass ?
Sir I need same circuit to operate 4 ohm 5w speakers can you recommend me recommend that these circuits without some annoying sound of "Bluetooth Connected" Like that.
PAM8403 (built in bluetooth version) or PAM8403 (without built in bluetooth) + bluetooth receiver losless 👍🏽
@@asikaje4982 thanks sir for ur recommendation
Bro need your help, pam8610 or xy-p15w?
Pam 8610 is best
Can you test tpa3118 sanwu board
how to wire 2 of bluetooth modul for 4 speakers guys ?
Ossum
Where to buy that power supply box
XY-P15W mantap, suplai 12,6v
How does it sound compare to PAM 8610 ? Please advice
Better than that i can guaranty that and the bonus that it comes with lot of protection and bluetooth 5.0
Where place can I bought !
Idol... Very nice tiny amp... 12v?
can it work with one 50W 4ohm speaker from a 12V 5A power supply ??
nope
what is the bluetooth codec?
Bluetooth amplifer ka prince kiteana he😍😍😍😍
660 draz pr
XY-P40W ?
Price???
$3.81 AUD on aliexpress cheaps as!
Supplied power? Volt and Amp?
24V - 10A in my case.. But you do not need such big amperage.. 3A is more than enough..
@@als-techreview Hi sir
I can using 12v-5A or not?
@@cuongnguyenphu4972 sure you can 👍
@@als-techreview Tks sir
I'm trying now.
Haw to connect to laptop sir...
will work with a subwoofer
Hey man your audio running that through self amplified monitors... let’s see it on a plain speaker!
hi,
Does the aux signal go in to the 2 way splitter?
It has no aux input
Wow
👍👍👍👍🇧🇩