วีดีโอ

The only flames here are the ones in my heart for you! Seriously, THANK YOU. It's ridiculous that Axial has an issue with this, and that we still have to fix it in brand new models in 2024.

Another extra you can add is a bearing behind the spur gear as it only has the one on the 'box itself,I had a bearing kicking about that was a snug push fit and a proper fit on the shaft. Makes a difference to the gear alignment and also makes it a little smoother! I know they were made to a price but I'd have paid an extra couple pounds at purchase for the benefit. Also instead of stressing the plastic gearcase,thin super glue will do the job and fill the gap,a light wipe with grease or light oil on the bearing will stop it from sticking in but the glue will fill the gap nicely! Give it a go if you feel confident,I use a specialist bearing glue on bike engines that helps with slack bearing housings so a similar thing,and not everyone has a tube of bearing glue but super glue works just don't forget the grease or oil!

5 years after you made this and it helped me a lot. I bought a cheap 10ii dig transmission, and this took all the slop out of the input shaft. Good stuff right here.

This looks amazing I will do this

I'm reading the comments and your replies. Are you saying this held up for over two years and still no slop in the bearings?

Thank you for Great tips..

won't the grease eat the paper ?

Thanks for your explanation, but I wish that the transmission of the crown could help me to have more force to climb rocks stronger better for my 2 speed transmission for an alxial SCX 10 2 1/10 Rc and a pinion for a 550 35T engine

Thanks for these info and tips. .🙏😊

Thanks for the good information sir also the video is well done

R u kidding me, lol that's ridiculous, I'm going to get the trx4 instead

Would aluminium foil work better? My scx10 ii kit was the same and also made a clicking noise

Great tip, thanks for sharing 👍

Nice!

This pisses me off. Is the kit the same way????

Good idea im going to to try with a plastic bag might hold up a bit better if i get it wet

Really ticks me off that we have to do this to an expensive toy, seems like Axial has dropped the ball on quality lately, getting to be the Matchbox of the RC world.

Hi Great video, had exactly the same issue with my Axial crc (not that old !!) and I've done exactly the same to bearings ( same as you been a mechanic for 25yrs good trick !) I also found a spacer that fitted ( interference fit) inside the plastic housing of spur gear shaft and drilled a 5mm hole in it for shaft seems to work , time will tell 👍👍

Pretty damn smart. Might just have to do this.