วีดีโอ

@thegoastofmccain5368 I don’t know, I’m Canadian. Do you know?

@@01VIPER27bullets

@@01VIPER27 guns

@@01VIPER27you know very well

@@GlobalSourcing Good catch but the ammo box seal actually has 2 - 1” gap that I cut out for off gassing that I did not mention on the video.

Thank you sir.

Thank you sir.

Thanks 👍

Almost there.

Thanks. It’s the first try. I have since replaced that and have made a better set up that I can actually let is loose or pull it down.

Thank you sir.

It’s is rip stop nylon. I just wish it were water proof. Even spraying and soaking it down with waterproofing agent did not last but yes I have a ton of fun with it. Please be sure to tag me when you get yours done.

Thanks for the sub

It can hold its own even with its heavier weight. The DF95 will surely win though if the wind starts to pick because of its lighter weight and slimmer body profile.

@@01VIPER27 The Seawind appeals to me over the DF95 in the aesthetics side of things... I can tell you really like the Imoca class boats in full scale...Wouldn't it be fantastic to have an Imoca 60 in a 1m variant...That'd be insane

@@Top-Jimmy I only know two guys succesful with Imoca scale boats. One is P-E Reg very successful, Thomas Norton, but has not posted lately, and an Aussie man on mezzenger with a very fast Imoca foiler but don't post on YT. Those are the only 3 I know.

@@01VIPER27 👌

I’ve always understood Tagalog but because of new friends and TH-cam helped a lot.😊

@@01VIPER27 - enjoy and stay safe my brother - hope to see you in the Spring !

Electronics are slowly coming in from Aliexpress, your shopee I think sa Pinas.

Salamat po.

One of the best pistol grip radio ng time nya. I'll take that sa Pinas for my MB na build ni Sir Macoy kasi malaki at mabigat yung FRSky X9D ko. I will put my MB on the X9D paginating dito. Pang travel ko na lang ang GT3B.

Thanks for the visit

Salamat kabayan.

@paulcooper7162 Thank you sir.

@ironcladrc Thank you sir.

here it is now... th-cam.com/video/RNxopwTLvJA/w-d-xo.html

You can get them from eBay or order it through your local hobby store.

That’s her alright!

I bought the quick build but if you like putting things together then buy the kit.

Thanks!

Thanks George.

@clioblue23 the genoa sail is a simple closed loop system. You can find that video on my video list or this link th-cam.com/video/T9YhoOADUVo/w-d-xo.html. I also used a second winch drum to run my main sail because there isn't enough room for the original 1/4 scale servo. Two videos after that is the new suit sail which gives you a shot of the deck sheet line routing. As for the radio mix, 80% on the rudder (aileron stick), -100% on the main sail (throttle stick), and 87% on the genoa sail (Right Slider) on my Taranis X9D radio. I also used two KingMax 7T SW22 Winch Drum servos and 35 KG rudder servo.

@edoardolivolsi4759 Its amazing you say my design is not a genoa sail yet your set up is exactly like my setup. If you really think that it is not then that makes yours genoa setup even much less than my setup. Even your genoa sail is way much smaller than mine. Have a great day buddy.

@@01VIPER27 I'm not referring to the dimensions but to the sheets that aren't independent and the wide sails don't open the sail... how many engines do you have for the genoa?

@@edoardolivolsi4759 You should do your research on people’s model before you comment. You can look at my build process. By the way, the engines you are referring to are called SERVOS. One cannot have a genoa sheeting line in an rc sailboat if you have the main sail tied to it. Which means it must have one on its own and another for the main sail. Of course you also need a 3 servo for the rudder if you didn’t know it. By the way. Your build looks like a monstrosity with all the aluminum and opening on the deck. You must get a lot of water in that boat of yours. Yes the genoa sail is a little big but that been already replaced. Look at my build and you will see how much better my work is compared to yours.

@@01VIPER27 I probably didn't explain myself well, for real control of the genoa the sheets must be independent of each other, therefore a servo is needed that controls a motor for each sheet, so that being independent, in sailing from the beam to the garden may both be released; if you have only one servo with a single sheet circuit not even abeam can work properly because if you loosen the leeward sheet the upwind one draws the clew to the center of the boat and therefore it will never be opened properly. I have mounted a servo and a motor for each sheet and I can adjust the clew to any position without interference; the servo reverses the motor and the motor rotates back and forth and controls its own sheet.

@@edoardolivolsi4759 1 Read the video description if you do not want to research my build. 2 Not only did you not do the research but it seems you did not even read my reply to you. 3 Perhaps you should put your glasses on so can see the answers to your question. 4 Your boat still looks like a montrosity.🤦‍♂

No it isn’t. It took me 4 years to find a machinist that was willing to do “a one of of custom 2 speed gear I was using when it was nitro powered.

@@01VIPER27 thanks for the reply, much appreciated