วีดีโอ

Thank you, and great question! Depending on the situation, this can help tighten up the dry mix. I find it sometimes helps to remove pick scrape without clamping the signal as hard as at the beginning of the chain.

I'm glad you found it helpful!

Nope. It won't be captured correctly, unfortunately.

@GaryWrightMusic - Thanks for coming back to me. I suppose you could enable it in your DAW if you were playing to backings and disable everything else in the SLO Sim whilst using the nano for Amp/Cab and effects and record that way. Sounds decent with the Andy James Plugin and then frees up a ton of CPU this way too if I just use a capture instead of 2 Amp Sims in my DAW.

I actually made a video outlining the method here! th-cam.com/video/PnlxQcuQ1rE/w-d-xo.html The Nano Cortex doesn't have an effects loop unfortunately, and it also has a fixed signal chain. So, this method makes use of the VP4 and it's split path signal chain capabilities.

Glad you liked it! 🙏🏻

Thank you! I'm glad you're finding them helpful. 🙏🏻

Thank you so much! 🙏🏻

Thanks, I'm super excited about it! 🙏🏻

@@GaryWrightMusic You should be. You create great content !!

Hey Jon, see the video around the 1:24 mark to see the wiring diagram for the scenario.

@ thanks Gary!

The arrow is pointing to the headphone out, although the commentary says to use the output at the rear where you would plug into a monitor. Might be worth pinning that.

Glad you found it helpful!

Awesome! The Mexico shows have looked incredible from video I have seen. I don't believe I'll be making any transitions to using it exclusively. Although, the profilers capabilities of accurate, dynamic captures are very evident. The mess dual recto I used in this video was spot on. The rest of the features are just way to clunky and dated for me by today's standards. #spoiled

@GaryWrightMusic Being that it was from their shows did it come with their tones as presets on the device?

@@johncarter1852 what’s QA?

@bysykler4959 Sorry I ment Quad Cortex.

Unfortunately, they wiped the device before selling it. So, all of my demos are patches I created. Mainly looking at rig rundowns as a guide and tuning to suit.

😄I don't think I like the Kemper _that much _

My absolute favorite neural capture is a pay to download capture from Jon over at SDS, of the Lichtlaerm Audio Prometheus. It is one of the best modern metal amps today, IMHO. ko-fi.com/s/4c9f089c53 Here is a list of a few others that are available free on the Neural Cloud that I feel are great too! MZero Capture: cloud.neuraldsp.com/cloud/u/RabeaAfro/neural-capture/view/1a4817df-efa2-4fdb-a362-1ff074f61d29 Stealth EL34 Gojira Blue: cloud.neuraldsp.com/cloud/discover/neural-capture/view/438a1abb-a8ca-4181-b224-85675c2eab3c Mesa Mark V ~ Ch3 Extreme: cloud.neuraldsp.com/cloud/discover/neural-capture/view/0d2007ab-f723-4748-afa2-e68363c04b69 Fortin Nameless - HiGain & Hex: cloud.neuraldsp.com/cloud/discover/neural-capture/view/81b07eef-aa12-4328-904c-59b95473543d

@@GaryWrightMusic Awesome! I'll try them out for sure. Thank you for being a great guy for us Nano Cortex users!

There really isn't much of a difference in this case, since both your amp and gt1000 both have an effects loop. The 4 cable method is really just attempting to make a closed loop in a scenario where the effects loop exists only on the amp (in most cases).

Glad you enjoy it!🙏🏻

Thank you for watching! There is latching settings you can configure on the NC. I don't believe it supports toe switches though.

🙏🏻glad you found the video helpful! Yes, the latching behavior and swappable function is awesome. It's one of the most in-depth features of the Nano Cortex.

Glad you like it! 🙏🏻🙏🏻

Plugin support isn't directly supported on the Nano Cortex. You can however use the methods I outlined in a video to neural capture a plugin. That would get you close to the plugin tonewise.

@ thank you !

Thank you so much! Really appreciate it! 🙏🏻

Awesome! Enjoy and please come back with any questions!

I believe it could if you were to bypass the capture block in those cases.

Yes! You don't even need the 4cm with the Quad Cortex, given the fact you have 2 fx loops.

Thanks for your reply. I’ve actually been successful using the QC’s 2 FX Loops with the VP4 and gotten a stereo signal but the cabling is different. Doing it this way I get the benefits of the VP4’s effects but you can only put the QC’s FX Loop block before the or after the amp so I’m thinking you can’t really take advantage of pre-fx/post-fx. Another words, I don’t think you can separate your drive/compressor effects before the amp and your modulation effects after the amp. Am I wrong about this. Thanks again!

Let me see what I can do! 🙏🏻

@@GaryWrightMusic I am confused about patch cables. One the Nano Cortex it uses TRS cables and I am not sure about what the Fractal VP4 uses. I know it's in mono so what patch cables did you use ? Thanks Kevin

Of course! Using the VP4 headphone port will give you the final results at the end of the loop.

There isn’t a headphone jack on the vp4

@@stuartglenn3719 There is one on The Nano Cortex.

I think the QC has come a long way since releasing the 3.x firmware updates. Previous to that update though, I completely agree with your assessment. Tone-x is hard to ignore, especially at the price point.

Ouch! That is unfortunate having that much markup. I agree with everything you mentioned! Thanks so much for the kind words.

Unfortunately, there is not. You would have to use the VP4 either before or after the NC, as there is no effects loop.

@@GaryWrightMusic Thank you Gary that's a bummer .

You can run the vp4 in 4CM with the nano. I have it set with a few effects in front and a few after. Only mono though

Guitar to vp4 in1 Vp4 out1 to nano in Nano out to vp4 in2 Vp4 out 2 to amp/interface/frfr

@@stuartglenn3719 Thanks. I am going to buy the VP4 and run it like this.

Unfortunately, there isn't currently.

Let me look for the logic master and I can upload the isolated guitar tracking.

Thank you! 🙏🏻 The Nano does straightforward amp/cab and basic effects well. There is truly stiff competition at this price point though.

Great to hear!

Glad it's helped! You would use output. 1+2 as these outputs are mono, representing left and right. Please feel free to ask any other questions, and I will happily help!

@@GaryWrightMusic yeah i do that. input 3 or 4 and out 1/2. The issue is that I can't mute the track with "i" and "R" when I record so the nano cortex always plays and I can't pan right left. Do you have any advice? Then I'll stop stressing you :D

You're welcome! You can use it with the Quad Cortex without any problems.

Thank you very much I ordered it and I'm excited🙂

@@AlexizZ6 By the way, it is no longer possible to order PandorA on the website (only a waiting list) 🙂

Hey dude🙋🏼‍♂️ then I was lucky ,was able to order it via the website a few days ago🤘

@@AlexizZ6 same)))

Good question! If you are running output of a mic'd cab to FoH, I think it can at 24v-60w. This is going to vary depending on the room and proximity to the drums.

@@GaryWrightMusic I want to get the same sound in any place/any cabinet this is my target. Firstly looked at the SD Power Stage 200, but when I saw this more compact format I was very interested. Usually at live the cabinet is mic'd, it seems that this pedal should be quite enough with a power supply of 24 v

Thank you! 🙏🏻🙏🏻

You're welcome!🙏🏻

Glad it was helpful!🙏🏻

Hey Teddy, Currently the Quad Cortex only natively support a specific subset of NeuralDSP plug-ins. (Archetype: Gojira X, Archetype: Plini X, Soldano SLO-100 X and Fortin Nameless Suite X). If you wanted to use the Tone King plug-in suite, you would need to try to capture the plug-in using the neural capture process. I have videos in this playlist that support getting started with neural capture. There are a couple of different tweaks necessary to capture a plug-in, that I am happy to help answer for you if you need.

@@GaryWrightMusic thank you some much brother ...again 😊 You are a good person. keep that heart man.

Wow. Always my pleasure! 🙏🏻

Thank you! 🙏🏻

They are potentially teasing a comeback. Stay tuned this year!

There is unfortunately not a Bluetooth option. You can use USB from the QC to your computer and output the QC sounds via audio interface. This allows for you to play and hear yourself, and whatever tracks you wish through the computer / studio monitors / headset.

@@GaryWrightMusicThere are differing opinions as to whether there is already a Bluetooth transmitter/receiver in the QC and that it’s not enabled yet. Any idea if this is true? Thanks much!!

🙏🏻

Hello! Unfortunately, you have to select either midi OR exp in the Nano Cortex configuration.

I am a little confused, as I haven't heard of a VP6 to understand your comparison. If you were hoping the VP4 had your list of items at the end of your comment, it does! Tuner ✔️ Compressor ✔️ Gate ✔️ EQ ✔️

@@GaryWrightMusic No, I'm saying it feels like the VP4 should have 6 options because if you want a drive/reverb/delay it's hard to fit in a gate/compressor eq with just 4.

Ah, ok. Yes!

I am using the temple audio quick attach plates. They essentially use double-sided tape (strong stuff), and then mount with a screw on the backside of the board.