- 20
- 46 114
DIY Gizmos
Canada
เข้าร่วมเมื่อ 24 ก.พ. 2017
On this channel, I mostly show the machines that I have built to process and form the plastic, using CNC technology
Subscribers version of DIY Pellet Extruder
One of my subscribers has sent me a video of his DIY Pellet Extruder that I have designed. I will try to make a new video of a detailed description of the extruder.
มุมมอง: 802
วีดีโอ
DIY UV resin curing station
มุมมอง 2072 ปีที่แล้ว
In this video i show how i made my own UV curing station.After any prints made by UV resin printer the printed part needs to be washed(most of the time in isopropyl alcohol) and then cured under the sun or UV Light source . But ready ones cost a lot so I decided to make my own and share how I did it. I will Post schematic and arduino sketch if anyone needs it. Thanks for watching
DIY wire feeder for TiG welding
มุมมอง 2.3K3 ปีที่แล้ว
A Little video about my DIY wire feeder for TiG welding. I'm using this feeder around a year now. If you have any questions about this set up feel free to ask.
500W Brushless Motor Spindle Voltage trick
มุมมอง 7K3 ปีที่แล้ว
I was not happy with the rpm of my 500W Brushless Motor Spindle and i found out that even on the controller it says that i can work with 24v it does not gets maximum declared RPM. So I fixed it .
![How To Protect Lead Screw From Dust And Chips For Less Than $3 On Any DIY Machine [USEFUL LIFE HACK]](http://i.ytimg.com/vi/_36bfHevmhA/mqdefault.jpg)
How To Protect Lead Screw From Dust And Chips For Less Than $3 On Any DIY Machine [USEFUL LIFE HACK]
มุมมอง 4043 ปีที่แล้ว
In this video, I show how to protect lead screw on a DIY CNC machine.
Injection molding (extruder) part 1
มุมมอง 7123 ปีที่แล้ว
I'm begging to build my diy fully automatic injection molding machine. in this video short explanation of the extusion system of the injection molding machine that I'm planning to use.
Large scale 3d printer DIY with pellet extruder, testing movement.
มุมมอง 1.8K3 ปีที่แล้ว
Another short video of me testing my large scale 3d printer with diy pellet extruder.
My large scale 3d printer with diy pellet extruder.
มุมมอง 10K3 ปีที่แล้ว
in this video i was testing x and y axis movement with pellet extruder, both 3d printer and extruder are diy
New version of DIY extrusion screw maker/CNC Part 2
มุมมอง 4423 ปีที่แล้ว
I have finished the mechanical part of my New version of extrusion screw maker/CNC. In next video i planning to the accuracy and repeatability test that i have performed. if you have any question feel free to ask in comments bellow. Regards
new version of DIY extrusion screw maker in process (чпу для изготовления шнеков своими руками)Part1
มุมมอง 4083 ปีที่แล้ว
This is the first video of new version of DIY extrusion screw maker/CNC. the future plan is to build an fully automatic injection molding machine. To do that i need another screw and i need to machine some parts for injection molding machine itself. This machine is not finished yet .
DIY extrusion screw maker machine part Explained part 2 + improvements to be made and future plans
มุมมอง 3753 ปีที่แล้ว
This is the part 2 of diy extrusion screw maker machine , in this video i explain software used , as promised link for the arduino based coordinated move th-cam.com/video/fHAO7SW-SZI/w-d-xo.html , if you follow the link you will find nice explanation how to run motors simultaneously.
DIY extrusion screw making machine explained Part 1
มุมมอง 3.6K3 ปีที่แล้ว
In this video i started to explain the screw maker machine. touched bases of electronics used. if you have any questions let me know in comments below. My Regards
DIY extrusion compression screw Part2 polishing with the belt sander
มุมมอง 2.5K4 ปีที่แล้ว
In this video I would be polishing the extrusion screw ( шнек в домашних условиях своими руками)
DIY compression extrusion screw maker finished cutting
มุมมอง 6K4 ปีที่แล้ว
In this video cutting with endmill is done
DIY pellet extruder v3 3d printer hotend
มุมมอง 2.1K5 ปีที่แล้ว
DIY pellet extruder v3 3d printer hotend
My DIY pellet extruder v1 3d printer hotend
มุมมอง 9385 ปีที่แล้ว
My DIY pellet extruder v1 3d printer hotend
Have you got a simple way to control the z-axis relative to the rotation of the material? Is there a simple program you’ve written? Do you have an encoder on the y-axis?
@en2oh this is my old machine it was not equipped with no encoder. In the new one that I'm building right now, there will be DRO
I want this machine do you sell plans?
@joshsundiwa if you tell me what size of screw you need I can help you.
@@diygizmos1837 Im far I'm from South Africa
@@joshsundiwa I will try to make another video with building instructions
@@diygizmos1837 Thanks
Did you have any kind of reversing mechanism for the extruder? Did you use a custom or off-the-shelf screw?
İ did, ON the the top of extruder there was a Dyson vacuum cleaner to deliver pellets.
The screw was of the shelf from plastic welder
Milling machine looks great!
Thanks my friend
Супер!!! Станочек, сделанный "малой кровью"- шедевр!!
Спасибо. Следующая будет чуть по больше
Its not a problem of the controller, your power supply is underrated. the BLDC can go up to 50v, and your spindle is rated for 48v, so you need to get a 48v power supply
Thanks
good job, can you send me plan or something i need to build this machine??
Leave me your email
@@diygizmos1837 why can not write my email, TH-cam did not let me to write
@@milanrezaee emilhse@mail.ru
hi can you send me solidworks file of this screw?? thanks
Hi I have look for it on hard-drive
@@diygizmos1837 thanks
I can't believe I didn't think of this. Thanks for making the video
Hey is it possible that you can upload your plans?
I will try find it on my computer
@@diygizmos1837 Thank you
@@diygizmos1837 And did you find it?
@@kev_rcng7836 i found part of it
@@diygizmos1837 Is it possible to send me them?I cant post my email here in youtube
Start Selling this buddy
Sell what?
@@diygizmos1837 those screws
@@djzatka nobody ever asked for one yet.
@@diygizmos1837 really? But i want one
Thats good. Make second part
I'm a bit busy these days. But I will show new stuff
@@diygizmos1837 alright
Bro it's easy to understand that 24 to 50v is the operating range of the controller but if you connect a motor that run 12000rpm at 48v obviously it run at half rpm at 24V.
Hidid you make the nozzle and auger yourself or can i buy it somewhere?
Можете спросить по русски
@@diygizmos1837 Ооо, круто) я хотел узнать, сопло вы сами делали или покупали и шнэк очень интересует он покупной или самодельный? Соотношение диаметра и длины) фух..вроде все)))
Шнек покупной с Алиекспресс
@@craftkov а все остальное сделанно токарем
@@craftkov если нужна помощь напишите мне на Emilhse@mail.ru
Is there a write up on how to build an extruder similar? As your capacity seems perfect and I am looking to do a build.
İ did not do write up yet. But I helped to one of the guys to build something similar cause he couldn't get the same screw.
If you leave me your email address I can send you the link for the screws that I managed to work
@@diygizmos1837 it keeps censoring is there any place to reach you like a website or something?
@@charlieroney1008 I emailed you back
Any guidelines for designing a twin screw extruder
Hi Mikey, I can help with that. I didn't make any video about it but the concept is quite easy
Keep going 🥳🥳🥳🥳
Thank you
Maaaaan i love you
Thank you
Норм :)
Спасибо
very good video I wanted to ask you how many amps is the transformer, thanks
Transformer(variable) is 10 amps
Do you still have the g code ? :) can u share it ?
it was done via arduino code. but I can explain that is really easy
leave me your email i will try my best
Thx. Appreciate…
No mail allowed !
@@diygizmos1837 is there another way to produce the extrusion screws? Maybe same cost but to make them bigger and faster?
Awesome project! What ratio gearbox would you recommend with the stepper motor? Thanks
Thanks. I will try to explain. It's not about gear ratio. By my calculations I needed approximately 15-18 Newton meter to be able to spin the screw + we have to add 20% extra. So by that calculations the stepper motor is 3 nm and I used 8:1 gear ratio with 95% efficiency. And had in the end something like 22.5 nm
Good tip for CNC newbies. Those spindles are garbage, do yourself a favor and get something with the correct bearings!
I know that but for now it does the trick. Thanks for advise
What's a good one than that's not heavy af?
hello, your design is great. Can you share with us the details of the materials you use in this feeding system and their properties?
Hi Burak, please this project is quite simple. I consist of 2 nema 17 steppers an arduino nano and some 3d printed parts.
Your very smart
Thank you
Super!👍👍👍
Thank you!!!
OMG love it
Thanks man
Can you share how did you calculate turns and movement of axis?
Yes of course. First you have to know what angle do you want your screw to be. (Pressure angle.higher the angle more materialis being pushed by the screw, but higher the load on motor and less capabilities to melt your material) then you devide length to the number of turns
Super work! Have you completed this project?
Hi , yes this project is completed and the printer was sold.
You're very smart👍
Thanks
does the hopper charge automatically ? Are there any ways that you could show us how to make one ourselves?
Hopper does not change. It automatically socks more pellets into hopper
well done. this is what i need as i am in the process of building my own little extruder. Can we somehow contact you?
Hi, thank you.Yes of course we can get in touch. I'm happy to help. please leave me your email and/or whatsapp number and i will get in touch with you.
I cant send the email adress here. Its blocked. Maby discord? arbaql#7045
@@Arbaql Emilhse@mail.ru
Ma bel progetto
grazie Signore .👍
Un po' troppo rumoroso
questo è stato uno dei primi video che ho fatto
@@diygizmos1837 intendevo rumoroso l'estrusore in fase di lavoro
Comunque è un bel lavoro complimenti 🙂👍
@@alexaltana6706 👍
Wow. Nice one .. you could sell some :)
Thanks buddy. My goal is not to sell. I made this machine cause I wanted to help a friend. When I received a quote from several screw making companies I was shocked. Crazy expensive. I spend maybe $100 for the machine. But screw makers were asking minimum $500
Very cool.
Thanks 😊 , if you have questions about design or set up feel free to ask. i would love to help
I like your video presentation😮And thank you for the tip!
You are most welcome. if you have any questions please let me know
this is good stuff thank you man
Thanks
If you want to build one of those and need help. Feel free to ask your questions, I will do my best to answer your questions
good one what max pitch can you make with this machine
With this machine you can do any pitch you like
Hello!! I would like to learn more about your design
Hi, please feel free to ask your questions I can make separate video and answer them
I've a question, what is the voltage that reaches the motor at 24VDC and at 48VDC?
Probably you are asking about RPM, at 24v approximately 6000 RPM, at 48v 12000 RPM
Ты русский?
я не русский но русски говорю. если есть вопросы спрашивай с удовольствием отвечу.
@@diygizmos1837 просто прям жёсткий акцент
ничего страшного меня понимают :))
How can I contact you about working on a project together..
Write your email I contact you
Emilhse@mail.ru
@@diygizmos1837 I emailed you!
Hello. Wery good work. Do you have any progress? And what the dimensions of printing area?
Hi Artem, the dimensions are x axis 1,5 meters, y axis 1,5 meters and z axis 1,2 meters. At the moment I have partially disassembled because I’m a planning to change belts to rack and pinion for more stability
Большое спасибо за интересные видео. Хотелось бы по возможности с вами связаться и пообщаться на тему шнеков. Мой адрес kessler-engineering@gmx.de. Заранее благодарен. Женя
Спасибо вам за теплые слова, я вам сегодня вечером напишу обязательно.
☝️👍👍👍
Thanks
👍👍👍👍👍
Thanks buddy!
How do you plan to understand that the injection mold is already filled with plastic and it is time to stop the engine? I am interested in protecting your engine from overheating. After all, it will burn out if the shaft stops, and the current will still be supplied to it.
That's really easy, I will use arduino and transistor, on biggest pulley I will attach magnets and will be able to know how many turns did the screw made, the second part will to use transistor to cut and power back the potentiometer
Hello. Is it a steel or aluminum screw?
hi there, The frame of the machine is aluminum, but screw itself is 316 stainless steel. Кстати я по русски тоже говарю
@@diygizmos1837 Привет что за сталь ? )
@@МаркПейдж Ближайший российский аналог AISI 316 - это сталь 07Х18Н13М2. ГОСТ 5632-72 также допускает в качестве аналогов несколько других марок - 03Х17Н14М2 и 03Х17Н14М3
@@diygizmos1837 Благодарю !
@@МаркПейдж без проблем, рад помочь
Following You !!!
Thanks buddy.
👍🏼👍🏼👍🏼
Thanks